pkgsrc-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[pkgsrc/trunk]: pkgsrc/multimedia/mkvtoolnix mkvtoolnix: updated to 61.0.0
details: https://anonhg.NetBSD.org/pkgsrc/rev/4683254eccf7
branches: trunk
changeset: 457647:4683254eccf7
user: adam <adam%pkgsrc.org@localhost>
date: Mon Aug 30 15:34:57 2021 +0000
description:
mkvtoolnix: updated to 61.0.0
Version 61.0.0 "So" 2021-08-30
New features and enhancements
* all: IETF BCP 47/RFC 5646 language tags: implemented support for officially
registered IANA language tag extensions.
* mkvmerge: track selection: when using language tags for selecting which
tracks to keep, mkvmerge will now use component-based language tag matching
instead of comparing them verbatim. This means that only those components
(language, region etc.) the user specified will be required to exist and be
equal. For example, if a file contains three subtitle tracks with languages
`es` (generic Spanish), `es-MX` (Spanish as spoken in Mexico) and `es-ES`
(Spanish as spoken in Spain), the user can use `--stracks es` to match all
three tracks or be more specific with e.g. `--stracks es-MX` which would
only match one track. Similarly inverting the selection with e.g. `--stracks
!es` would get rid of all three tracks, not just the one for the generic
Spanish.
* MKVToolNix GUI: multiplexer: deriving track languages from file names: the
GUI can now detect full BCP 47/RFC 5646 language tags in file names.
* MKVToolNix GUI: multiplexer: deriving track languages from file names: the
default list of boundary characters now includes `-`.
* MKVToolNix GUI: multiplexer: the GUI now defaults to the "lower" process
priority setting for new installations in order to leave more room for other
applications, especially interactive ones. Up to and including v59 the
default was the "normal" process priority. v60 changed that to "lowest",
which turned out to be much slower on Windows for no real gain over
"lower". The setting will be auto-corrected by the GUI if the settings file
were saved last with a version between v60.0.0.0 & v60.0.0.17 & "lowest" &
it is still set to "lowest".
* HEVC dumper development tool: the tool has been renamed to `xvc_dump` and
extended to be able to dump AVC/H.264 bitstreams, too. It now also detects
the type of bitstream framing (ISO 14496-15 vs. ITU-T H.264/H.265 Annex B).
Bug fixes
* all: IETF BCP 47/RFC 5646 language tags: fixed a corner case of wrongfully
allowing scripts/variants not listed in any of the entries in the prefix
list when the prefix list contains prefixes restricting scripts/variants and
a prefix solely with the language at the same time (example: the variant
`ekavsk` with its prefixes `sr`, `sr-Cyrl` and `sr-Latn` where
e.g. `sr-ekavsk` and `sr-Cyrl-ekavsk` should be allowed but not
`sr-Bali-ekavsk`).
* mkvmerge: HEVC/H.265: the frame type of B frames was often wrongfully
signalled as P frames instead, both with `BlockGroup` (missing second
references) and `SimpleBlock` ("discardable" flag not set) elements.
* mkvmerge: SSA/ASS packetizer: the frame numbers will now be re-calculated
when appending SSA/ASS tracks so that frame numbers of appended tracks are
always strictly higher than frame numbers of the track they're appended to.
* mkvmerge, MKVToolNix GUI's chapter editor: BCP 47/RFC 5646 language tags:
when BCP 47 language tags are used with a language code that isn't part of
ISO 639-2, the programs will now write a legacy language element set to
`und` ("undetermined") instead of not writing such an element at all or
writing one with an invalid code.
* mkvmerge, MKVToolNix GUI's chapter editor: BCP 47/RFC 5646 language tags:
the programs will ensure that the legacy and IETF language elements written
will be unique within the scope of the same "chapter display" element.
* mkvinfo, MKVToolNix GUI's info tool: in summary mode the frame type was
reported wrong for `BlockGroup` elements in which the `ReferenceBlock`
elements were located behind the `Block` element.
Build system changes
* all: `std::codecvt_utf8` is now used instead of Boost's
`utf8_codecvt_facet`. The bundled copy the latter in `lib/boost` has
therefore been removed.
diffstat:
multimedia/mkvtoolnix/Makefile | 4 ++--
multimedia/mkvtoolnix/distinfo | 10 +++++-----
2 files changed, 7 insertions(+), 7 deletions(-)
diffs (29 lines):
diff -r 4792eabf3d6b -r 4683254eccf7 multimedia/mkvtoolnix/Makefile
--- a/multimedia/mkvtoolnix/Makefile Mon Aug 30 15:34:40 2021 +0000
+++ b/multimedia/mkvtoolnix/Makefile Mon Aug 30 15:34:57 2021 +0000
@@ -1,6 +1,6 @@
-# $NetBSD: Makefile,v 1.180 2021/08/01 18:09:38 adam Exp $
+# $NetBSD: Makefile,v 1.181 2021/08/30 15:34:57 adam Exp $
-DISTNAME= mkvtoolnix-60.0.0
+DISTNAME= mkvtoolnix-61.0.0
CATEGORIES= multimedia
MASTER_SITES= https://mkvtoolnix.download/sources/
EXTRACT_SUFX= .tar.xz
diff -r 4792eabf3d6b -r 4683254eccf7 multimedia/mkvtoolnix/distinfo
--- a/multimedia/mkvtoolnix/distinfo Mon Aug 30 15:34:40 2021 +0000
+++ b/multimedia/mkvtoolnix/distinfo Mon Aug 30 15:34:57 2021 +0000
@@ -1,8 +1,8 @@
-$NetBSD: distinfo,v 1.93 2021/08/01 18:09:38 adam Exp $
+$NetBSD: distinfo,v 1.94 2021/08/30 15:34:57 adam Exp $
-SHA1 (mkvtoolnix-60.0.0.tar.xz) = 906b81099cc9af1d5feb44a8ecc7fbd707cc67cb
-RMD160 (mkvtoolnix-60.0.0.tar.xz) = 862469e2e4f3a6aeb34160117a46bc222c399e55
-SHA512 (mkvtoolnix-60.0.0.tar.xz) = 90bbb95c3a7a91bd47f76aaec9459a1f6f26a381ff03db1047c0fdb41cb87bdd96160c448152357a2b306adbd26f478112ac5d5e8215ee37331a15fc89fa43c3
-Size (mkvtoolnix-60.0.0.tar.xz) = 7657960 bytes
+SHA1 (mkvtoolnix-61.0.0.tar.xz) = 9e37dc678d0724636141d23204d027ee8c933223
+RMD160 (mkvtoolnix-61.0.0.tar.xz) = 0c6bcb06573d67c647fc4ac0df6be4323b80a93b
+SHA512 (mkvtoolnix-61.0.0.tar.xz) = 9f35b5af8784eb4b92b437f41b5df677aa7fc859827eaef4d0e2d8531ad9908331f70a852c7e6e965a5f8cec47b38c6c91b8fbdbcaee0edca54f8cbb000ba582
+Size (mkvtoolnix-61.0.0.tar.xz) = 7662500 bytes
SHA1 (patch-Rakefile) = 08dbf4a4968008ff258a66e71aa2bddc61c04af6
SHA1 (patch-src_common_locale.cpp) = 2f3113c8c9171b87a421df447f6c421b1e4dc7e0
Home |
Main Index |
Thread Index |
Old Index