Module Name:	pkgsrc
Committed By:	veego
Date:		Wed Feb 21 20:18:50 UTC 2001

Modified Files:
	pkgsrc/graphics/xsane: Makefile
	pkgsrc/graphics/xsane/files: md5 patch-sum
	pkgsrc/graphics/xsane/pkg: PLIST
Removed Files:
	pkgsrc/graphics/xsane/patches: patch-aa

Log Message:
Update xsane to 0.72:

xsane-0.64 -> 0.65:
-------------------

 - src/Makefile.in: added usage of SANE_CFLAGS and GTK_CFLAGS

 - added secure password transmission for authorisation (md5digest)

 - ~/.sane/pass is used for reading user:password:resource from file before asking the user

 - configure: removed test for X (AC_PATH_X), this is done in GTK (gtk-config)
   gtk includes and libs are used for png test (because png often is in X directories)

 - changed xsane_*_with_pixmap:
   old status: routines used xsane.histogram_dialog->window as window for gdk_pixmap_create_from_xpm_d()
     this made problems with preview window if X default color depth differd from X color depth
   new status: routines are called with parameter GdkWindow *window now.

xsane-0.65 -> 0.66:
-------------------

 - added setup menu for Automatic Document Feeder Scansource
   (ADF-Scansource name was predefined to "Automatic Document Feeder" before,
    now it can be defined for each device (is saved in decice settings))

 - changed setup for lineart->grayscale scanmode from entry to menu with available scanmodes

 - updated xsane.WIN32-compilation and src/Makefile.in.WIN32
   I compiled a pre version of xsane-0.66 with the cygwin snapshot from 2000-12-10 and
   gtk+-dev-20001023.zip, glib-dev-20001023.zip, libiconv-dev-20001007.zip
   with the way described in xsane.WIN32-compilation without any problems.
   The problem with the fork() seems to be solved in this cygwin version.

 - updated aclocal.m4 and configure (gimp test)

xsane-0.66 -> 0.67:
-------------------

 - added test if (xsane.adf_scansource) before usage of xsane.adf_scansource
   (caused segfault when no ADF Scanmode was defined in setup)

xsane-0.67 -> 0.68:
-------------------

 - changed src/Makefile.in.WIN32 so that the installation directory can
   be selected by configure --prefix=... and the used paths are more
   common to the one on unix (/usr/local => c:\sane)

 - changed src/Makefile.in.WIN32 for gimp support (uncomment GIMP_LIBS)

 - WIN32+gimp-support: set_gimp_PLUG_IN_INFO_PTR(&PLUG_IN_INFO) is called

 - added extern GimpPlugIn PLUG_IN_INFO to xsane.h (needed in xsane.c for win32)

 - replaced free(xsane.tile) by g_free(xsane.tile)
   (the free(...) caused a crash on win32)

 - changed aclocal.m4: gimp test does work with gimp-1.0.x version again

 - renamed xsane.WIN32 and xsane.WIN32-compilation to xsane-WIN32.txt
   and xsane-WIN32-compilation.txt (it is easer to use on windows)

 - removed (#ifndef _WIN32) gtk_set_locale() from xsane.c for win32
   (when it was called gimp plugin created transparent images)

 - saved xsane-style.rc in DOS mode (\n\r)

xsane-0.68 -> 0.69:
-------------------

 - some changes in aclocal.m4 for gimp test:
   - When gimp-config is not found, the output of gtk-config is used
   - GTK_CFLAGS or GIMP_CFLAGS are added to CPPFLAGS for test for gimp.h and gimpfeatures.h
   - GTK_CFLAGS and GTK_LIBS are erased when gimp_config is available

 - changed src/Makefile.in: GIMP_CFLAGS is used now

 - saved xsane-style.rc in unix mode (\n) because DOS mode (\n\r) made problems

 - added new way to call netscape remote command:
   at first xsane tries to find out if netscape is running, for this it tries to
   find out if there is a link "~/.netscape/lock". If this link exists netscape should
   be running and xsane calls "netscape -remote openFile(...)". Otherwise xsane calls
   "netscape ..."

 - changed keywork "netscape-remote" as docviewer to "netscape"

 - changed way to find out home directory in xsane-back-gtk.c:
   now getenv(ENVIRONMENT_HOME_DIR_NAME) is used instead of getpwuid(...)->pw_dir.
   (getenv is usable for Win32 and unix, getpwuid makes problems on Win32)

xsane-0.69 -> 0.70:
-------------------

 - removed some bugs in text for pipette in sane-xsane-preview-doc.html

 - changed acloacal.m4: when gimp-config is not found we look for gimptool

 - for WIN32 the filetypes listed in the filetype menu are ".jpg" and ".tif"
   instead of ".jpeg" and ".tiff"

 - added manufacturer image to bottom of standard and advanced options window.
   The name of the image is "vendor"-logo.xpm" or "sane-"backend"-logo.xpm",
   the size of the image should be 256x48 pixels with a transparent background.

 - changed src/Makfile.in: *-logo.xpm are installed (make install) and
   uninstalled (make uninstall) now

 - changed src/Makfile.in.WIN32: *-logo.xpm are installed (make install)now

 - several changes in xsane-preview.c for rotating preview by 0/90/180/270 degree
   the preview rotation is ready now

 - added new routine xsane_save_rotate_image to xsane-save.c

 - added new routine xsane_save_grayscale_image_as_lineart to xsane-save.c

 - lineart images are saved in grayscale mode at first if transformation has to be done

 - xsane_save_rotate_image is called beween scanning and saving image

 - xsane_save_grayscale_image_as_lineart is called beween rotating and saving image

 - aclocal.m4/configure: changed sane_major_version etc to SANE_CURRENT_MAJOR

 - fileheader of raw format changed. This format is not defined, but some programs
   can read it as 16 bit pnm binary data, so we use a compatible header now:
     P5
     # This file is in a not public defined data format.
     # It is a 16 bit gray binary format.
     # Some programs can read this as pnm/pgm format.
     # SANE data follows.
     100 100
     65535

xsane-0.70 -> 0.71:
-------------------

 - corrected aspect ratio in xsane-preview.c in routine that calculates preview resolution

 - corrected user definition of maximum scanner surface

 - added translation of preview menu maximum surface(preset area)

 - added tooltip for maximum surface(preset area) menu and rotation menu

 - finished  preview_autoselect_scanarea()

 - added autoselect scanarea button to preview window

 - changed automaitic increase of filename counter:
   - the step direction and length is not forced to +1,
     the user can select one of the values -2/-1/0/+1/+2.
     It is defined by preferences.filename_counter_step.
     This way it is possible to scan double sided papers
     with correct automatic page number generation.
   - the digits are not increased by a loop any more,
     the number is read, the new number is calculated
     and the new filename is generated. The user can
     select a minimum filename counter length now,
     it is defined in preferences.filename_counter_len
     and can be selected by the user in setup/saving options
   - when the number of digits are not enough the number is
     automatically increased now.
   - a message comes up when counter gets smaller than 0

 - pipette the color is averaged on a square, the size of the
   square can be defined by the user

 - updated html doc (not complete)

 - added tooltips to permission buttons (r,w,x)
   permission texts: user, group, all, read, write, execute can be translated now.

 - added japanese translation (thanks to Kimizuka Tomokazu <sgtom@pluto.dti.ne.jp>)

 - renamed oldgimp.h to gimp-1_0-compat.h

xsane-0.71 -> 0.72:
-------------------

 - changed default postscript viewer from xv to gv

 - moved int i, select = 1; in static void xsane_saving_notebook() out of #ifdef HAVE_LIBTIFF block

 - filename counter length correction is only done in sane_start when there is a user selectable filename

 - if external filename is given the counter len is not touched when not necessary

 - added "insert file" function to fax mode

 - added output of gamma, brightness and contrast settings to pnm headers

 - updated xsane online-documentation (html)

 - added license dialog, it is shown when it was not already accepted for this xsane version
   (tested in local xsane.rc)

 - about and about translation dialogs do not set XSane´s sensitivity to false any more

 - copyright sign is now always defined as "(c)", can be translated with \251 if character is available

 - device preferences are not saved/loaded any more when file selection is aborted

 - in xsane_info_dialog the scanner type is translated now

 - added accelerator keys to device selection dialog:
     Escape   -> Cancel
     F1,F2,.. -> select device number 1,2,...

 - added usleep(100ms) in device selection dialog before scanning for devices, this way we make
   sure that the text "scanning for devices" is displayed

 - added some accelarator keys to the preview window:
    Alt ESC   Cancel Preview Scan
    Alt KP+  Zoom in
    Alt KP-  Zoom out
    Alt KP*  Zoom not
    Alt KP/  Zoom undo
    Alt A     Autoselect scanarea
    Alt V     Select visible scanarea

 - added accelerator key Escape to file-selection-dialog, about-dialog and about-translation-dialog
   attached to cancel/close button

 - updated translations:
   - german translation
   - czech translation    - thanks to Stanislav Brabec <utx@penguin.cz>
   - turkish translation  - thanks to Togan Muftuoglo <toganm@yahoo.com>
   - japanese translation - thanks to Kimizuka Tomokazu <sgtom@pluto.dti.ne.jp>
   - french translation   - thanks to Laurent Grawet <laurent.grawet@ibelgique.com>


To generate a diff of this commit:
cvs rdiff -r1.21 -r1.22 pkgsrc/graphics/xsane/Makefile
cvs rdiff -r1.11 -r1.12 pkgsrc/graphics/xsane/files/md5
cvs rdiff -r1.9 -r1.10 pkgsrc/graphics/xsane/files/patch-sum
cvs rdiff -r1.7 -r0 pkgsrc/graphics/xsane/patches/patch-aa
cvs rdiff -r1.9 -r1.10 pkgsrc/graphics/xsane/pkg/PLIST

Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.