CVS commit: pkgsrc/audio/rubberband

["Thomas Klausner" <wiz%netbsd.org@localhost>]

Module Name:    pkgsrc
Committed By:   wiz
Date:           Wed Mar  8 08:00:58 UTC 2023

Modified Files:
        pkgsrc/audio/rubberband: Makefile PLIST distinfo
Removed Files:
        pkgsrc/audio/rubberband/patches: patch-meson.build

Log Message:
rubberband: update to 3.1.2.

Changes in Rubber Band v3.1.2

This minor release contains a small number of build fixes.

 * Make all optional targets manually toggleable, using Meson
   "features" options (see COMPILING.md for documentation)
 * Further fix to JNI autodetection, following that of 3.1.1 -
   hopefully solving the problem completely this time!
 * Correct the source file listing in the Android makefile
 * Fix build with NO_EXCEPTIONS, e.g. for Android
 * Fix required #includes for mingw32 builds

The API is unchanged from 3.0 and the library is binary compatible
back to version 1.7.

Changes in Rubber Band v3.1.1

This minor release contains no code changes, only a fix to the build
system.

 * Fix failure to configure and build on some systems without a Java
   compiler. Java/JNI support is entirely optional in Rubber Band, but
   auto-detection of whether to build it or not was failing in certain
   environments: this broke the normal build process for some users.

The API is unchanged from 3.0 and the library is binary compatible
back to version 1.7.

Changes in Rubber Band v3.1

This significant release contains many enhancements that can improve
performance, as well as a number of bug fixes.

 * Add support for "short window" mode, OptionWindowShort, to the new
   R3 processing engine. This option previously only took effect with
   the R2 engine. When used with R3 it disables the R3 multi-window
   logic while retaining R3's signal analysis, yielding output with
   some of the quality advantages of R3 (especially for non-percussive
   content) but with far lower CPU usage and processing delay.
 * Implement OptionPitchHighSpeed in the R3 engine. Previously it
   always used OptionPitchHighConsistency internally. With this option
   real-time pitch-shifting upwards becomes much faster, at the
   expense of some output quality. (However OptionPitchHighConsistency
   is still always necessary to avoid artifacts when performing
   dynamic pitch changes.)
 * Add support for the SLEEF library (libsleefdft) for FFTs. In
   our tests this library approaches the performance of vDSP and IPP
   and improves on the other supported options.
 * Add support for external Speex library (libspeexdsp) for
   resampling. This is a very fast resampler, significantly improved
   over the older Speex code that has historically been bundled with
   Rubber Band. It may still introduce a little more audible noise on
   ratio changes than the built-in resampler.
 * Update the R2 engine so that it always restores vertical phase
   coherence gradually when returning to a ratio of 1.0 (as R3 also
   does) rather than waiting for silence or a transient.
 * Update R3 to properly support all sample rates between 8000 and
   192000 Hz.
 * Update command-line utility so as to use the extension of the
   output filename to determine the file type to write. Previously
   the output was always the same format as the input file,
   regardless of extension.
 * Remove support for libresample. This integration has not been
   exercised in many years and other resamplers are better options.
 * Fix several bugs, including a crash when run with very low sample
   rates.

The API is unchanged from 3.0 and the library is binary compatible
back to version 1.7.

Changes in Rubber Band v3.0.0

 * Introduce a new processing engine, the R3 (Finer) engine, which
   typically produces higher-quality output than the existing R2
   engine, though at significantly higher CPU cost. The R2 engine is
   still the default, and R3 can be selected using the new
   OptionEngineFiner option on construction. See the documentation for
   more details.
 * Add ability to provide a custom set of log callbacks, so that
   debug and warning logs can be routed to the application's log
   stream and/or handled in a realtime-safe way
 * Add option to shift formant independently of pitch (R3 engine
   only)
 * Deprecate the rather ambiguous function getLatency(), effectively
   replacing it with two new functions getPreferredStartPad() and
   getStartDelay(). See their documentation for more details

The library is both binary and API compatible all the way back to the
1.x series for existing applications.  Code written to use 3.0 is not
necessarily compatible with 2.x or 1.x, as several new functions and
enum values have been added, but code written to use any earlier
version can update to 3.0 without modification (and will continue to
use the same processing engine if the calling code is unchanged).

Changes in Rubber Band v2.0.2

 * Fix a crash in certain configurations when using mid-side
   processing (OptionChannelsTogether) with pitch shifts
 * Fix failure to build on very old macOS versions (<= 10.8) when
   combined with much newer compilers

The API is unchanged and the library is binary compatible back to
version 1.7.

Changes in Rubber Band v2.0.1

 * Add a preliminary LV2 version of the example pitch-shifter plugin,
   and update the existing LADSPA version to fix failure of the wet/dry
   control to work correctly under in-place use
 * Make the built-in resampler (introduced in v2.0.0) the default for
   all builds, and use it in the official packaged versions of the
   command-line utility. External resampler libraries are still
   available as build options
 * A couple of build fixes, including supporting the proper Meson
   option (default_library=shared/static/both) at configuration time
   to choose which type of library to build, instead of the custom
   option used since v1.9.1

The API is unchanged and the library is binary compatible back to
version 1.7.

Changes in Rubber Band v2.0.0

 * Introduce a built-in resampler, intended to minimise artifacts on
   pitch changes and to allow Rubber Band to be compiled without any
   external dependencies (when also using the built-in FFT). The
   built-in resampler is newer and less well-tested than
   libsamplerate, and is not yet the default except in no-dependency
   builds
 * Introduce single compilation unit single/RubberBandSingle.cpp which
   includes the whole library, to allow adding Rubber Band Library to
   a C++ project without having to build anything separately. This
   version always uses the built-in FFT and resampler and does not
   support any extra configuration
 * Update the stretch calculation logic for real-time mode, making it
   more rigorous about avoiding timing drift when the pitch ratio
   changes frequently
 * Update the example LADSPA pitch shift plugin, adding a wet/dry mix
   control to test (and take advantage of) the better timing
   management in real-time mode
 * Add a pitch/frequency-map file option to the command-line utility,
   allowing time-varying pitch shifts to be pre-programmed

The API is unchanged and the library is still binary compatible back
to version 1.7.

We incremented the major version number, not because of any API
change, but because of a change to the timing of audio output for some
applications of real-time mode. While the library is code-compatible
with earlier releases, it is not "output-compatible" and may change
automation-driven mixes even when used with identical options. If you
are already using an earlier release in real-time mode, please test
v2.0.0 carefully before updating.

Note that there are no pure bug-fixes in v2.0.0: if you are happy with
v1.9.2, there is no pressing reason to update.


To generate a diff of this commit:
cvs rdiff -u -r1.10 -r1.11 pkgsrc/audio/rubberband/Makefile
cvs rdiff -u -r1.5 -r1.6 pkgsrc/audio/rubberband/PLIST
cvs rdiff -u -r1.7 -r1.8 pkgsrc/audio/rubberband/distinfo
cvs rdiff -u -r1.2 -r0 pkgsrc/audio/rubberband/patches/patch-meson.build

Please note that diffs are not public domain; they are subject to the
copyright notices on the relevant files.

Modified files:

Index: pkgsrc/audio/rubberband/Makefile
diff -u pkgsrc/audio/rubberband/Makefile:1.10 pkgsrc/audio/rubberband/Makefile:1.11
--- pkgsrc/audio/rubberband/Makefile:1.10       Sun Sep 11 12:51:04 2022
+++ pkgsrc/audio/rubberband/Makefile    Wed Mar  8 08:00:58 2023
@@ -1,7 +1,6 @@
-# $NetBSD: Makefile,v 1.10 2022/09/11 12:51:04 wiz Exp $
+# $NetBSD: Makefile,v 1.11 2023/03/08 08:00:58 wiz Exp $
 
-DISTNAME=      rubberband-1.9.2
-PKGREVISION=   2
+DISTNAME=      rubberband-3.1.2
 CATEGORIES=    audio
 MASTER_SITES=  https://breakfastquay.com/files/releases/
 EXTRACT_SUFX=  .tar.bz2

Index: pkgsrc/audio/rubberband/PLIST
diff -u pkgsrc/audio/rubberband/PLIST:1.5 pkgsrc/audio/rubberband/PLIST:1.6
--- pkgsrc/audio/rubberband/PLIST:1.5   Tue Jun  8 15:52:59 2021
+++ pkgsrc/audio/rubberband/PLIST       Wed Mar  8 08:00:58 2023
@@ -1,5 +1,6 @@
-@comment $NetBSD: PLIST,v 1.5 2021/06/08 15:52:59 nia Exp $
+@comment $NetBSD: PLIST,v 1.6 2023/03/08 08:00:58 wiz Exp $
 bin/rubberband
+bin/rubberband-r3
 include/rubberband/RubberBandStretcher.h
 include/rubberband/rubberband-c.h
 lib/ladspa/ladspa-rubberband.cat
@@ -7,7 +8,7 @@ lib/ladspa/ladspa-rubberband.so
 lib/librubberband.a
 lib/librubberband.so
 lib/librubberband.so.2
-lib/librubberband.so.2.1.4
+lib/librubberband.so.2.2.1
 lib/pkgconfig/rubberband.pc
 lib/vamp/vamp-rubberband.cat
 lib/vamp/vamp-rubberband.so

Index: pkgsrc/audio/rubberband/distinfo
diff -u pkgsrc/audio/rubberband/distinfo:1.7 pkgsrc/audio/rubberband/distinfo:1.8
--- pkgsrc/audio/rubberband/distinfo:1.7        Tue Oct 26 09:59:28 2021
+++ pkgsrc/audio/rubberband/distinfo    Wed Mar  8 08:00:58 2023
@@ -1,6 +1,5 @@
-$NetBSD: distinfo,v 1.7 2021/10/26 09:59:28 nia Exp $
+$NetBSD: distinfo,v 1.8 2023/03/08 08:00:58 wiz Exp $
 
-BLAKE2s (rubberband-1.9.2.tar.bz2) = 8fc670c6d6cb3394980c9e5a7d5693813f0e8661cc97985cbdbde9f8b94ea006
-SHA512 (rubberband-1.9.2.tar.bz2) = b1c763ab2a428aa2f1f8e5d0be6e9eb669808059ee5389e94f12de25f1a05cd89022656d98906c90b616773da11ab1f596ae2c5a9d300118e88049e1443121f2
-Size (rubberband-1.9.2.tar.bz2) = 164178 bytes
-SHA1 (patch-meson.build) = a267d9f150491f381e3bfd546334c15991a9ee06
+BLAKE2s (rubberband-3.1.2.tar.bz2) = 5fc11f89499614d10c2eab4c0819913cfae83937b70cdbd20ab50d4ca45185e7
+SHA512 (rubberband-3.1.2.tar.bz2) = b21605a0cf882e34fc2eada38a446220257e4b067475e36dfeef00d491425ad51398fbb49773dbd162683531b70f7c864ab02bff744d7e0dde7ed1d64aa1d327
+Size (rubberband-3.1.2.tar.bz2) = 218361 bytes