Over the past few days I've been updating my DEC FDDI driver to
understand the bus.h stuff now in NetBSD 1.1B.  Last night I
got the stuff working on NetBSD/i386.  Tonight it's working
on NetBSD/alpha.

Currently on the DEFPA (PCI) and DEFEA (EISA) are supported
(on both alpha and i386). As soon as bus.h support is done for
the TurboChannel, the DEFTA will also be supported.  The
probe/attach routines are already written.  

How fast is it?  Remember the is not compiled optimized.
How without too much tuning I got ~60Mb/s.

NetBSD 1.1B (TOMMY) #6: Thu May 16 20:48:08 PDT 1996
    root@trix.lkg.dec.com:/usr/src/sys/arch/alpha/compile/TOMMY
AlphaStation 400 4/233 ("Avanti"), 232MHz
8192 byte page size, 1 processor.
real mem = 67108864 (2105344 reserved for PROM, 65003520 used by NetBSD)
avail mem = 56885248
using 409 buffers containing 3350528 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: 21064A (EV45), Pass 3
cpu0: VAX FP support, IEEE FP support, Primary Eligible
apecs0 at mainbus0: DECchip 21071 Core Logic chipset
apecs0: DC21071-CA pass 2, 64-bit memory bus
apecs0: DC21071-DA pass 2
pci0 at apecs0 bus 0
ncr0 at pci0 dev 6 function 0: NCR 53c810 SCSI
ncr0: interrupting at ISA irq 11
ncr0: restart (scsi reset).
scsibus0 at ncr0
sd0 at scsibus0 targ 0 lun 0: <DEC, RZ26L    (C) DEC, 440C> SCSI2 0/direct 
fixed
sd0: sd0(ncr0:0:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8.
1001MB, 3117 cyl, 8 head, 82 sec, 512 bytes/sec
sd1 at scsibus0 targ 2 lun 0: <DEC, RZ26     (C) DEC, 392A> SCSI2 0/direct 
fixed
sd1: sd1(ncr0:2:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8.
1001MB, 2570 cyl, 14 head, 57 sec, 512 bytes/sec
cd0 at scsibus0 targ 4 lun 0: <DEC, RRD43   (C) DEC, 1084> SCSI2 5/cdrom 
removable
sio0 at pci0 dev 7 function 0: Intel 82378IB PCI-ISA Bridge (System I/O) (rev. 
0x03)
isa0 at sio0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
lpt0 at isa0 port 0x3bc-0x3c3 irq 7
pckbd0 at isa0 irq 1
pms0 at isa0 port 0x60-0x67 irq 12
mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
tga0 at pci0 dev 11 function 0: DC21030 step B, board type T8-02
tga0: 1280 x 1024, 8bpp, Bt485 RAMDAC
tga0: interrupting at ISA irq 10
wscons0 at tga0: console
de0 at pci0 dev 12 function 0: DC21040 [10Mb/s] pass 2.3
de0: Ethernet address 08:00:2b:e4:99:59
de0: enabling 10baseT/UTP port
de0: interrupting at ISA irq 14
fpa0 at pci0 dev 13 function 0: DEC DEFPA PCI FDDI SAS Controller
fpa0: FDDI address 08:00:2b:a2:33:1e, FW=2.46, HW=1, SMT V7.2
fpa0: FDDI Port = S (PMD = ANSI Multi-Mode)
fpa0: interrupting at ISA irq 15
init: copying out path `/sbin/init' 11
trix# ifconfig fpa0 3.3.3.3
trix#
May 16 20:51:42 trix /netbsd: fpa0: Link Unavailable
May 16 20:51:42 trix /netbsd: fpa0: Link Unavailable
May 16 20:51:43 trix /netbsd: fpa0: Link Available
May 16 20:51:43 trix /netbsd: fpa0: Link Available

-- 
Matt Thomas               Internet:   matt@3am-software.com
3am Software Foundry      WWW URL:    http://www.3am-software.com/bio/matt.html
Westford, MA              Disclaimer: I disavow all knowledge of this message