On Sat, 2 Aug 1997 16:46:48 -0400 (EDT) 
 "Jeremy 'Moose' Shabat" <moose@digex.net> wrote:

 > > > ifconfig: SIOCSIFMEDIA: Device not configured
 > > 
 > > from the srm console:
 > > 
 > > 	set ep0_mode UTP
 > 
 > I am guessing on the ep0_mode.  On my AXPpci33 it's ewa0_mode.

"Ummm...."

My guess is that the SRM isn't going to know squat about a non-Tulip
ethernet card... If the driver is "ep", then it's a 3Com Etherlink III
of some sort.

Ari - please run the following command:

	ifconfig -am

...you will see output similar to the following:

icky (thorpej) ~ 123% ifconfig -am
ep0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        address: 00:60:97:49:63:51
        media: 10baseT/UTP
        supported media: 10base2/BNC 10base5/AUI 10baseT/UTP
        inet 204.188.152.11 netmask 0xffffff00 broadcast 204.188.152.255
lo0: flags=8009<UP,LOOPBACK,MULTICAST> mtu 32768
        inet 127.0.0.1 netmask 0xff000000 
icky (thorpej) ~ 124% 

Also, please post the output of "dmesg" after a fresh boot.

Jason R. Thorpe                                       thorpej@nas.nasa.gov
NASA Ames Research Center                            Home: +1 408 866 1912
NAS: M/S 258-6                                       Work: +1 415 604 0935
Moffett Field, CA 94035                             Pager: +1 415 428 6939