Matthew Jacob <mjacob@feral.com> writes:

> I have a test kernel that at least has a couple of changes in it if
> Johan can try it (he said he might be away after today into next
> week).

I'll be leaving in half an hour or so.

> ftp://ftp.feral.com/outgoing/netbsd.EXP_ISP.gz

This seems to work better (it at least passes the fsck test). Is this
just updated firmware, or are there less obvious changes?

This kernel is compiled with pciide, which I hadn't been able to get
to work, but removing the IDE CD-ROM seems to have solved that problem
too (sorry for my confusing setup, booting from one disk, having the
filesystem on another, performing tests on a third, and trying not to
screw up the contents of a fourth :-).

>>>b -fl s -fi "netbsd.EXP_ISP.gz" dkb0
(boot dkb0.0.1.4.0 -file netbsd.EXP_ISP.gz -flags s)
block 0 of dkb0.0.1.4.0 is a valid boot block
reading 15 blocks from dkb0.0.1.4.0
bootstrap code read in
base = 1f2000, image_start = 0, image_bytes = 1e00
initializing HWRPB at 2000
initializing page table at 1e4000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code

NetBSD/Alpha Primary Boot
Jumping to entry point...

NetBSD/Alpha Secondary Boot, Revision 1.9
(ross@zeta.teraflop.com, Sun Jun 28 15:39:07 PDT 1998)

VMS PAL rev: 0x1000000010114
OSF PAL rev: 0x1000000020116
Switch to OSF PAL code succeeded.

Boot file: netbsd.EXP_ISP.gz
Boot flags: s

Loading netbsd.EXP_ISP.gz...
3400760+334448 [85+366792+214978]

Entering netbsd.EXP_ISP.gz at 0xfffffc0000300fc0...
[ preserving 582760 bytes of netbsd symbol table ]
consinit: not using prom console
Copyright (c) 1996, 1997, 1998
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.3F (ALPHA) #8: Thu Jul 30 20:56:43 PDT 1998
    mjacob@nobble.feral.com:/space/isp_test/arch/alpha/compile/ALPHA
Digital Personal WorkStation 500au, 500MHz
8192 byte page size, 1 processor.
real mem = 134217728 (2048000 reserved for PROM, 132169728 used by NetBSD)
avail mem = 111542272
using 1613 buffers containing 13213696 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21164A (reserved minor type)
cpu0: VAX FP support, IEEE FP support, Primary Eligible
cia0 at mainbus0: DECchip 2117x Core Logic Chipset (Pyxis), pass 1
cia0: extended capabilities: 1<BWEN>
cia0: using BWX for PCI config access
cia0: WARNING: Pyxis pass 1 DMA bug; no bets...
pci0 at cia0 bus 0
pci0: i/o enabled, memory enabled
de0 at pci0 dev 3 function 0
de0: interrupting at dec 550 irq 8
de0: DEC 21143 [10-100Mb/s] pass 3.0
de0: address 00:00:f8:75:6d:9a
de0: enabling 10baseT port
pciide0 at pci0 dev 4 function 0: CMD Technology PCI0646 (rev. 0x01)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel wired to compatibility mode
pciide0: primary channel ignored (not responding; disabled or no drives?)
pciide0: secondary channel wired to compatibility mode
wdc2 at pciide0 channel 1
atapibus0 at wdc2
wd0 at wdc2 drive 0: <H3133-A2>
wd0: using 1-sector 16-bit pio transfers, chs mode
wd0: 127MB, 1023 cyl, 15 head, 17 sec, 512 bytes/sec
sio0 at pci0 dev 7 function 0: Intel 82378ZB System I/O (SIO) (rev. 0x43)
fpa0 at pci0 dev 11 function 0: DEC DEFPA PCI FDDI SAS Controller
fpa0: FDDI address 00:00:f8:40:b2:23, FW=3.10, HW=1, SMT V7.2
fpa0: FDDI Port = S (PMD = ANSI Multi-Mode)
fpa0: interrupting at dec 550 irq 12
Digital Equipment TGA2 (VGA display, revision 0x22) at pci0 dev 12 function 0 not configured
ppb0 at pci0 dev 20 function 0: Digital Equipment DECchip 21052 PCI-PCI Bridge (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o enabled, memory enabled
isp0 at pci1 dev 8 function 0
isp0: Board Revision 1040B, loaded F/W Revision 7.55
isp0: interrupting at dec 550 irq 20
scsibus0 at isp0: 16 targets
sd0 at scsibus0 targ 0 lun 0: <DEC, RZ1CC-BA (C) DEC, 880F> SCSI2 0/direct fixed
sd0: 4091MB, 3708 cyl, 20 head, 113 sec, 512 bytes/sect x 8380080 sectors
sd1 at scsibus0 targ 1 lun 0: <DEC, DSP3105S, T384> SCSI2 0/direct fixed
sd1: 1001MB, 2570 cyl, 14 head, 57 sec, 512 bytes/sect x 2050860 sectors
ahc0 at pci1 dev 9 function 0
ahc0: interrupting at dec 550 irq 24
ahc0: Reading SEEPROM...done.
ahc0: aic7860 Single Channel, SCSI Id=7, 3 SCBs
ahc0: Resetting Channel A
ahc0: Downloading Sequencer Program...Done
scsibus1 at ahc0 channel 0: 8 targets
ahc0: target 3 synchronous at 10.0MHz, offset = 0xf
sd2 at scsibus1 targ 3 lun 0: <DEC, RZ26     (C) DEC, T386> SCSI2 0/direct fixed
sd2: 1001MB, 2570 cyl, 14 head, 57 sec, 512 bytes/sect x 2050860 sectors
isa0 at sio0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
vga0 at isa0 port 0x3b0-0x3df iomem 0xa0000-0xbffff
wsdisplay0 at vga0
lpt0 at isa0 port 0x3bc-0x3bf irq 7
pckbc0 at isa0 port 0x60-0x64
pckbdprobe: reset error 5
psmprobe: reset error 5
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
WARNING: can't figure what device matches "SCSI 0 4 1 0 0 0 0"
root device: sd2a
dump device (default sd2b): 
file system (default generic): 
root on sd2a dumps on sd2b
mountroot: trying nfs...
mountroot: trying ext2fs...
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying ffs...
root file system type: ffs
init: copying out flags `-s' 3
init: copying out path `/sbin/init' 11
de0: link down: cable problem?
Enter pathname of shell or RETURN for sh: 
# fsck -p -f /dev/sd1a
/dev/rsd1a: 2 files, 2 used, 38537 free (25 frags, 4814 blocks, 0.1% fragmentation)
# fsck -p -f /dev/sd1a
/dev/rsd1a: 2 files, 2 used, 38537 free (25 frags, 4814 blocks, 0.1% fragmentation)
# fsck -p -f /dev/sd1a
/dev/rsd1a: 2 files, 2 used, 38537 free (25 frags, 4814 blocks, 0.1% fragmentation)
# fsck -p -f /dev/sd1a
/dev/rsd1a: 2 files, 2 used, 38537 free (25 frags, 4814 blocks, 0.1% fragmentation)
# fsck -p -f /dev/sd1a
/dev/rsd1a: 2 files, 2 used, 38537 free (25 frags, 4814 blocks, 0.1% fragmentation)
# fsck -p -f /dev/sd1d
/dev/rsd1d: INCORRECT BLOCK COUNT I=1538 (22496 should be 208) (CORRECTED)
/dev/rsd1d: FREE BLK COUNT(S) WRONG IN SUPERBLK (SALVAGED)
/dev/rsd1d: BLK(S) MISSING IN BIT MAPS (SALVAGED)
/dev/rsd1d: SUMMARY INFORMATION BAD (SALVAGED)
/dev/rsd1d: 4 files, 12938 used, 824585 free (25 frags, 103070 blocks, 0.0% fragmentation)
/dev/rsd1d: MARKING FILE SYSTEM CLEAN
# fsck -p -f /dev/sd1d
/dev/rsd1d: 4 files, 12938 used, 824585 free (25 frags, 103070 blocks, 0.0% fragmentation)
# fsck -p -f /dev/sd1d
/dev/rsd1d: 4 files, 12938 used, 824585 free (25 frags, 103070 blocks, 0.0% fragmentation)
# fsck -p -f /dev/sd1d
/dev/rsd1d: 4 files, 12938 used, 824585 free (25 frags, 103070 blocks, 0.0% fragmentation)