"Soren S. Jorvang" wrote:
> 
> On Tue, Feb 22, 2000 at 11:14:37PM +0100, Bert Kiers wrote:
> > Is an IBM auto 16/4 token ring ISA card supposed to work in an AXPpci33
> > computer?
> 
> > isapnp* at      isa?
> > tr0 at isa? port 0xa20 iomem 0xd800 irq ?
> > tr* at isa? port ? irq ?
> > tr* at isapnp?
> > There are no jumpers on the card, so I think it's plug and play. There
> > is nothing about ibmtr in dmesg. Am I to tell the SRM there is a pnp
> > card there? How?
> 
> If it is an isapnp card, I think it should just work. Try posting
> complete dmesg output.

Here is is:

Copyright (c) 1996, 1997, 1998, 1999
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.4 (NONAME) #12: Wed Feb  9 21:34:23 CET 2000
    kiers@noname:/usr/src/sys/arch/alpha/compile/NONAME
Alpha PC AXPpci33, 167MHz
8192 byte page size, 1 processor.
real mem = 33554432 (2064384 reserved for PROM, 31490048 used by NetBSD)
avail mem = 25665536
using 384 buffers containing 3145728 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), LCA (21066 pass 2)
lca0 at mainbus0
pci0 at lca0 bus 0
pci0: i/o enabled, memory enabled
ncr0 at pci0 dev 6 function 0: ncr 53c810 fast10 scsi
ncr0: interrupting at isa irq 11
ncr0: minsync=25, maxsync=206, maxoffs=8, 16 dwords burst, normal dma
fifo
ncr0: single-ended, open drain IRQ driver
ncr0: restart (scsi reset).
scsibus0 at ncr0: 8 targets, 8 luns per target
sd0 at scsibus0 targ 0 lun 0: <FUJITSU, M2954Q-512, 0155> SCSI2 0/direct
fixed
sd0(ncr0:0:0): 10.0 MB/s (100 ns, offset 8)
sd0: 4149MB, 5714 cyl, 9 head, 165 sec, 512 bytes/sect x 8498506 sectors
cd0 at scsibus0 targ 2 lun 0: <RICOH, MP6200S, 2.20> SCSI2 5/cdrom
removable
sio0 at pci0 dev 7 function 0: Intel 82378ZB System I/O (SIO) (rev.
0x03)
de0 at pci0 dev 8 function 0
de0: interrupting at isa irq 5
de0: DEC DE500-AA 21140A [10-100Mb/s] pass 2.0
de0: address 00:00:f8:05:5a:fa
de0: enabling 100baseTX port
de1 at pci0 dev 12 function 0
de1: interrupting at isa irq 9
de1: DEC DE450-TA 21041 [10Mb/s] pass 1.1
de1: address 00:00:f8:00:ea:06
de1: enabling 10baseT port
isa0 at sio0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
vga0 at isa0 port 0x3b0-0x3df iomem 0xa0000-0xbffff
wsdisplay0 at vga0
pckbc0 at isa0 port 0x60-0x64
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
isabeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
isapnp0: no ISA Plug 'n Play devices found
root on sd0a dumps on sd0b
root file system type: ffs
de0: enabling 100baseTX port
de1: enabling 10baseT port
cd0(ncr0:2:0): Sense Error Code 0x0
cd0(ncr0:2:0): Sense Error Code 0x0
00:50:04:7b:24:60 on de0 tried to overwrite arp info for 10.0.6.3 on de1

This box functions as a router and name server.

> 
> If it is a normal ISA board, try playing with the isacfg SRM command.
> 
> > Secondly, will libpcap work with it?
> 
> It should, though I don't think it supports promiscous mode.
> 
> --
> Soren

--
Bert Kiers, !MCSE && 0xFF