Subject: asc errors
To: None <port-alpha@netbsd.org>
From: Gregory Smith <wolfy@cmu.edu>
List: port-alpha
Date: 06/12/2000 00:06:44
Why is asc doing this? Is my data at risk? Should I send-pr? Thanks
Gregory
> [ preserving 195528 bytes of netbsd ELF symbol table ]
> Copyright (c) 1996, 1997, 1998, 1999, 2000
> The NetBSD Foundation, Inc. All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
>
> NetBSD 1.4Z (VORHAND) #0: Tue Jun 6 19:35:36 PDT 2000
> root@vorhand:/usr/src/sys/arch/alpha/compile/VORHAND
> DEC 3000 - M400, 133MHz
> 8192 byte page size, 1 processor.
> total memory = 98304 KB
> (2048 KB reserved for PROM, 96256 KB used by NetBSD)
> avail memory = 86888 KB
> using 614 buffers containing 4912 KB of memory
> mainbus0 (root)
> cpu0 at mainbus0: ID 0 (primary), 21064-1 (pass 3)
> tcasic0 at mainbus0
> tc0 at tcasic0: 25 MHz clock
> ioasic0 at tc0 slot 7 offset 0x0: fast mode
> le0 at ioasic0 offset 0xc0000: address 08:00:2b:38:7e:57
> le0: 32 receive buffers, 8 transmit buffers
> zsc0 at ioasic0 offset 0x100000
> vsms0 at zsc0 channel 0
> wsmouse0 at vsms0
> zstty0 at zsc0 channel 1
> zsc1 at ioasic0 offset 0x180000
> lkkbd0 at zsc1 channel 0
> wskbd0 at lkkbd0: console keyboard
> zstty1 at zsc1 channel 1
> mcclock0 at ioasic0 offset 0x200000: mc146818 or compatible
> AMD79c30 at ioasic0 offset 0x240000 not configured
> tcds0 at tc0 slot 6 offset 0x0: TurboChannel Dual SCSI (baseboard)
> asc0 at tcds0 chip 0: NCR53C94, 25MHz, SCSI ID 7
> scsibus0 at asc0: 8 targets, 8 luns per target
> asc1 at tcds0 chip 1: NCR53C94, 25MHz, SCSI ID 7
> scsibus1 at asc1: 8 targets, 8 luns per target
> sfb0 at tc0 slot 3 offset 0x0: 1280 x 1024, 8bpp
> wsdisplay0 at sfb0: console (std, vt100 emulation), using wskbd0
> scsibus0: waiting 2 seconds for devices to settle...
> cd0 at scsibus0 target 4 lun 0: <DEC, RRD42 (C) DEC, 4.5d> SCSI2
> 5/cdrom remov able
> scsibus1: waiting 2 seconds for devices to settle...
> probe(asc1:1:0): max sync rate 5.00MB/s
> sd0 at scsibus1 target 1 lun 0: <SEAGATE, ST410800N, 7112> SCSI2 0/direct
> fixed sd0: 8347 MB, 4926 cyl, 26 head, 133 sec, 512 bytes/sect x 17096357
> sectors root on sd0a dumps on sd0b
> root file system type: ffs
> sd0(asc1:1:0): asc1: timed out [ecb 0xfffffe0000026170 (flags 0x3, dleft
> e000, s tat 0)], <state 4, nexus 0xfffffe0000026170, phase(l 1, c 1, p
> 1), resid c000, m sg(q 0,o 0) DMA active>
> sd0(asc1:1:0): sync negotiation disabled
> sd0(asc1:1:0): asc1: timed out [ecb 0xfffffe0000026170 (flags 0x43, dleft
> e000, stat 0)], <state 4, nexus 0xfffffe0000026170, phase(l 1, c 1, p 1),
> resid c000, msg(q 20,o 0) DMA active> AGAIN
> asc1: SCSI bus reset