Subject: bootpd question...
To: None <port-alpha@netbsd.org>
From: T. Martin <catfish@alltel.net>
List: port-alpha
Date: 07/12/2000 22:31:23
Hello,
I'm using Linux as the bootp server trying to get NetBSD up on a
DEC3000 300.
Heres what I got so far.....
[root@jesse /etc]# bootptest jesse
bootptest: version 2.4.0
Sending to 10.0.0.4 (request) htype:0 hlen:0 xid:4311 C:10.0.0.4
vend-rfc1395
Recvd from 10.0.0.4 (reply) htype:0 hlen:0 xid:4311 C:10.0.0.4 S:10.0.0.4
sname:"jesse" file:"/netboot" vend-rfc1395 SM:255.0.0.0 BFS:0 ROOT:"/bsd/"
HN:"dec.crash.lan" LOG:10.0.0.4
Heres what I get from SRM
>>> boot -file netboot eas0
INIT-S-CPU...
INIT-S-ASIC...
INIT-S-MEM...
INIT-S-NVR...
INIT-S-CXT...
INIT-S-SCC...
INIT-S-NI...
INIT-S-SCSI...
INIT-S-ISDN...
AUDIT_BOOT_STARTS ...
AUDIT_BOOT_REQ NETBOOT
AUDIT_BOOT_RETRY
And the logs don't show it ever connecting to the bootp server
This DEC was setup by default to boot off the 10bT eas0
I know the docs say ews0 but I don't have an ews0 entry.
Could anyone please give me a few suggestions?
Heres the /etc/bootptab
#/etc/bootptab
dec.crash.lan:\
:ht=ether:\
:ha=0000C0828AD1:\
:sm=255.0.0.0:\
:lg=10.0.0.4:\
:ip=10.0.0.4:\
:hn:\
:bf=netboot:\
:bs=auto:\
:rp=/bsd/:\
:sa=10.0.0.4:\
:vm=auto:
And
Heres the SRM I got on the serial console.
DEC 3000 - M300
Digital Equipment Corporation
VPP PAL V5.56-80800101/OSF PAL V1.45-80800201 - Built on 5-APR-1996
12:459
TCINFO DEVNAM DEVSTAT
------ -------- --------
CPU OK KN16-AA -V6.7-S866-I211-sV2.0-DECchip 21064
P3.0
OSC 150 MHz
ASIC OK
MEM OK
FEROM OK
6
CXT OK
5
NVR OK
SCC ? 60
NI OK
ISDN OK
4
SCSI OK
>>> show dev
BOOTDEV ADDR DEVTYPE NUMBYTES RM/FX WP DEVNAM REV
------- ---- ------- -------- ----- -- ------ ---
ESA0 08-00-2B-BB-50-3D , TENBT
DKA100 A/1/0 DISK 1.05GB FX RZ26L 440C
DKA300 A/3/0 DISK 535.65MB FX RZ25L 0008
..HostID.. A/7 INITR
>>> show
AUTO_ACTION = BOOT
BOOTDEF_DEV = ESA0
BOOT_OSFLAGS = 0,0
ENABLE_AUDIT = OFF
BOOT_RESET = ON
SCSI_RESET = 4
DIAG_LOE = OFF
DIAG_QUICK = OFF
DIAG_SECTION = 1
DUMP_DEV =
ETHERNET = 08-00-2B-BB-50-3D , TENBT
LANGUAGE = 3
MOP = ON
SECURE = OFF
POWERUP_TIME = {NULL}
RADIX = 0
SCSI_A = 7
TRIGGER = ON
I know alot of this might irrelavant but I wanted to show all I could.
I figure its minor I just do not know where.
Thanks a million.
Terry
catfish: icq #20116127