This is a multi-part message in MIME format.
--------------2C8406FB781740AB8A1ADF7B
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Any progress in getrting X to work on the 600au machine, my dmesg on
boot is shown below:
i f i try to xinit  to start X the machine locks up hard.
-Mel

--------------2C8406FB781740AB8A1ADF7B
Content-Type: text/plain; charset=us-ascii;
 name="dmesg.1"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg.1"

[ preserving 445000 bytes of netbsd ELF symbol table ]
consinit: not using prom console
Copyright (c) 1996, 1997, 1998, 1999, 2000
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5 (GENERIC) #10: Wed Nov 22 03:00:56 PST 2000
    root@frau-farbissina.shagadelic.org:/amd/swinger/u1/netbsd-1-5/src/sys/arch/alpha/compile/GENERIC
Digital Personal WorkStation 600au, 598MHz
8192 byte page size, 1 processor.
total memory = 128 MB
(1888 KB reserved for PROM, 126 MB used by NetBSD)
avail memory = 111 MB
using 820 buffers containing 6560 KB of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21164A-0 (unknown minor type 0)
cpu0: Architecture extensions: 1<BWX>
cia0 at mainbus0: DECchip 2117x Core Logic Chipset (Pyxis), pass 1
cia0: extended capabilities: 1<BWEN>
cia0: using BWX for PCI config access
cia0: WARNING: Pyxis pass 1 DMA bug; no bets...
pci0 at cia0 bus 0
pci0: i/o space, memory space enabled
de0 at pci0 dev 3 function 0
de0: interrupting at dec 550 irq 0
de0: DEC 21143 [10-100Mb/s] pass 3.0
de0: address 00:00:f8:76:07:6e
pciide0 at pci0 dev 4 function 0: CMD Technology PCI0646 (rev. 0x01)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
atapibus0 at pciide0 channel 0
cd0 at atapibus0 drive 0: <TOSHIBA CD-ROM XM-6202B, b\134221\134311\134373\134000, 1110> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: primary channel interrupting at isa irq 14
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
pciide0: disabling secondary channel (no drives)
sio0 at pci0 dev 7 function 0: Intel 82378ZB System I/O (SIO) (rev. 0x43)
tga0 at pci0 dev 11 function 0: TGA2 pass 2, board type T8-02
tga0: 1280 x 1024, 8bpp, Bt485 RAMDAC
tga0: interrupting at dec 550 irq 4
wsdisplay0 at tga0: console (std, vt100 emulation)
ppb0 at pci0 dev 20 function 0: Digital Equipment DECchip 21152 PCI-PCI Bridge (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
isp0 at pci1 dev 9 function 0
isp0: interrupting at dec 550 irq 16
isp0: Ultra Mode Capable
isp0: Board Revision 1040B, loaded F/W Revision 4.65.0
isp0: Last F/W revision was 5.27.1
isp0: 243 max I/O commands supported
isp0: driver initiated bus reset of bus 0
scsibus0 at isp0: 16 targets, 8 luns per target
isa0 at sio0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0
vga0 at isa0 port 0x3b0-0x3df iomem 0xa0000-0xbffff
wsdisplay1 at vga0
lpt0 at isa0 port 0x3bc-0x3bf irq 7
sb0 at isa0 port 0x220-0x237 irq 5 drq 1: dsp v3.01
audio0 at sb0: half duplex, mmap, independent
midi at sb0 not configured
opl at sb0 not configured
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
isabeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
scsibus0: waiting 2 seconds for devices to settle...
de0: enabling 100baseTX port
isp0: Bus 0 Target 0 Async Mode 
sd0 at scsibus0 target 0 lun 0: <DEC, RZ1CB-BS (C) DEC, 0818> SCSI2 0/direct fixed
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
sd0: 4091 MB, 3708 cyl, 20 head, 113 sec, 512 bytes/sect x 8380080 sectors
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 0 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 1 Async Mode 
sd1 at scsibus0 target 1 lun 0: <SEAGATE, ST39236LW, 0010> SCSI3 0/direct fixed
isp0: Bus 0 Target 1 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
sd1: 8761 MB, 14384 cyl, 3 head, 415 sec, 512 bytes/sect x 17942584 sectors
isp0: Bus 0 Target 1 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
root on sd1a dumps on sd1b
isp0: Bus 0 Target 1 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
isp0: Bus 0 Target 1 at 20MHz Max Offset 8, 16 bit wide, Tagged Queueing Enabled
root file system type: ffs

--------------2C8406FB781740AB8A1ADF7B--