Subject: Re: Miata GL 500au + Powerstorm 3D30
To: R. C. Dowdeswell <elric@imrryr.org>
From: Berndt Josef Wulf <wulf@dingo.ping.net.au>
List: port-alpha
Date: 12/24/2001 16:06:57
R. C. Dowdeswell wrote
>
> On 715690334 seconds since the Beginning of the UNIX epoch
> Berndt Josef Wulf wrote:
> >
>
> >It now works after I've inserted the card into a 64bit slot. I usually
> >plug graphic cards into slot closest to the processor.
>
> Excellent. You can actually use one of these cards as a second
> graphics card in one of the 32bit slots---but the SRM needs the
> console to be in a 64bit slot.
>
> >Do you have a table that shows switch settings for the different
> >resolutions? My monitor didn't synchronize at the default setting
> >but seems fine on setting number 5 (1024x768 72Hz).
>
> Well, the easiest form of docs is:
>
> src/sys/dev/ic/decmonitors.c.
>
> I should probably make a table.
>
> Be warned though that the PowerStorm 3d30 doesn't work at 1600x1200,
> I don't think. I think that this is a h/w limit.
Ok, found it... below is the table for future reference:
Switch | Resolution | Refresh
Setting | Horizontal | Vertical | Rate [Hz]
---------------------------------------------
0x00 | 1240 | 1024 | 72
0x01 | 1240 | 1024 | 66
0x02 | 1240 | 1024 | 60
0x03 | 1152 | 900 | 72
0x04 | 1600 | 1200 | 65
0x05 | 1024 | 768 | 70
0x06 | 1024 | 768 | 72
0x07 | 1024 | 864 | 60
0x08 | 1024 | 768 | 60
0x09 | 800 | 600 | 72
0x0A | 800 | 600 | 60
0x0B | 640 | 480 | 72
0x0C | 640 | 480 | 60
0x0D | 1240 | 1024 | 75
0x0E | 1240 | 1024 | 60
0x0F | 1600 | 1200 | 75
--------------------------------------------
Thanks again,
cheerio Berndt
--
Name : Berndt Josef Wulf | +++ With BSD on Packet Radio +++
E-Mail : wulf@ping.net.au | tfkiss, tnt, dpbox, wampes
ICQ : 18196098 | VK5ABN, Nairne, South Australia
URL : http://www.ping.net.au/~wulf | MBOX : vk5abn@vk5abn.#lmr.#sa.au.oc
sysinfo : DEC AXPpci33+, NetBSD-1.5 | BBS : vk5abn.#lmr.#sa.aus.oc