Sorry, not sure if it's ZC or not.. it's a current snapshot as of December
last year...

> -----Original Message-----
> From: Collin Baillie [mailto:Collin.Baillie@world.net]
> Sent: Friday, 17 May 2002 11:34 AM
> To: 'CHOI Junho'
> Cc: port-alpha@netbsd.org
> Subject: RE: netboot 1.5ZC on AS2100
> 
> 
> Ok, so you haven't gotten a kernel to boot on it at all. I've 
> got a 1.5ZC
> kernel compiled with 2100 support in it, but I haven't 
> managed to find the
> time to try booting it yet.
> 
> I'll *try* to give it a whirl over the weekend, and see how 
> it goes.  (Have
> to setup my 3000/400 to get the image off)
> 
> Cheers,
> 
> Collin
> 
> > -----Original Message-----
> > From: CHOI Junho [mailto:cjh@kr.FreeBSD.org]
> > Sent: Thursday, 16 May 2002 10:11 PM
> > To: Collin.Baillie@world.net
> > Cc: port-alpha@netbsd.org
> > Subject: Re: netboot 1.5ZC on AS2100
> > 
> > 
> > From: Collin Baillie <Collin.Baillie@world.net>
> > Subject: RE: netboot 1.5ZC on AS2100
> > Date: Thu, 16 May 2002 14:38:25 +1000
> > 
> > > Choi,
> > > 
> > > Is it possible for you to paste the output from the kernel 
> > starting up?
> > > Something like what dmesg would show you?
> > 
> > I posted netboot and kernel output on port-alpha:
> > 
> >    http://www.geocrawler.com/lists/3/NetBSD/472/75/8634126/
> > 
> > Kernel doesn't startup after uncompressing netbsd.gz. Even 
> I couldn't
> > see NetBSD copyright message... It hangs right after "[ no 
> > symbol table
> > formats found ]".
> >  
> > > What other cards do you have in your 2100? I had issues 
> > booting Linux on my
> > > 2100 4/275, because I have a ZXLp-E3 video card which Linux 
> > doesn't support.
> > > I just hung, with no error message, when initializing the card. 
> > 
> > That's the output of SRM "show config" command(except MAC address):
> > 
> > 		Digital Equipment Corporation
> > 		   AlphaServer 2100 4/200
> > 
> > SRM Console V5.3-2		VMS PALcode V5.56-7, OSF 
> > PALcode V1.45-12
> > 
> > Component	Status		Module ID
> > CPU 0		  P		B2020-AA DECchip (tm) 21064-3
> > Memory 0	  P		B2021-CA 128MB
> > I/O				B2110-AA
> > 				dva0.0.0.1000.0		RX26/RX23
> > 
> >  Slot	Option			Hose 0, Bus 0, PCI
> >    0	DECchip 21040-AA	ewa0.0.0.0		
> ****************
> >    1	NCR 53C810		pka0.7.0.1.0		
> SCSI Bus ID 7
> >    				dka600.6.0.1.0		RRD43
> > 				mka0.0.0.1.0		TLZ06
> >    2	Intel 82375					Bridge 
> > to Bus 1, EISA
> > 
> >  Slot	Option			Hose 0, Bus 1, EISA
> >    2	Compaq Qvision
> >    7	Mylex DAC960		dra.0.0.1007.0
> >    				dra0.0.0.1007.0		1 Member JBOD
> >    				dra1.0.0.1007.0		1 Member JBOD
> > 
> > > So if you could give us a full list of the hardware you 
> > have, and any output
> > > from the kernel, up to where it hangs, maybe we can see 
> > something you're not
> > > picking up on
> > 
> > > Collin
> > 
> > --
> >  +++ Any opinions in this posting are my own and not those of 
> > my employers +++
> >  CHOI Junho [sleeping now]                    
> <http://www.kr.FreeBSD.org/~cjh>
>  [while sleeping] <cjh @ kr.FreeBSD.ORG> <cjh @ FreeBSD.ORG> <cjh @
> wdb.co.kr>
>  Korea FreeBSD Users Group <www.kr.FreeBSD.org>   Web Data
> Bank<www.wdb.co.kr>
>