Subject: Re: Support for alphaserver 2100?
To: None <Collin.Baillie@world.net>
From: CHOI Junho <cjh@kr.FreeBSD.org>
List: port-alpha
Date: 06/27/2002 20:34:09
Hi All,
I tried serial console, it boot with recent 1.6BETA_2 snapshot!
But I got stucked at mlx0 probe...
NetBSD 1.6_BETA2 (INSTALL) #0: Wed Jun 19 18:48:01 MEST 2002
bouyer@java:/home/tmp/alpha/obj/sys/arch/alpha/compile/INSTALL
AlphaServer 2100 4/200, 190MHz, s/n
8192 byte page size, 1 processor.
total memory = 128 MB
(2120 KB reserved for PROM, 125 MB used by NetBSD)
avail memory = 109 MB
using 818 buffers containing 6544 KB of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21064-1
cpu0: Architecture extensions: fffffc000060bbd8<PAT,MVI>
ttwoga0 at mainbus0
ttwopci0 at ttwoga0 hose 0: T2 Gate Array rev. 1
sableio0 at ttwopci0 bus 0: Sable STDIO module
pckbc0 at sableio0 port 0x60
fdc1 at sableio0 port 0x3f0
fdc1: interrupting at T2 irq 7
fd0 at fdc1 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
com0 at sableio0 port 0x3f8: ns16550a, working fifo
com0: console
com0: interrupting at T2 irq 15
com1 at sableio0 port 0x2f8: ns16550a, working fifo
com1: interrupting at T2 irq 8
lpt0 at sableio0 port 0x3bc
lpt0: interrupting at T2 irq 9
pci0 at ttwopci0 bus 0
pci0: i/o space, memory space enabled
tlp0 at pci0 dev 0 function 0: DECchip 21040 Ethernet, pass 2.3
tlp0: interrupting at T2 irq 2
tlp0: Ethernet address 08:00:2b:e4:5b:60
tlp0: 10baseT, 10baseT-FDX, 10base5, manual
siop0 at pci0 dev 1 function 0: Symbios Logic 53c810 (fast scsi)
siop0: interrupting at T2 irq 1
scsibus0 at siop0: 8 targets, 8 luns per target
pceb0 at pci0 dev 2 function 0: vendor 0x8086 product 0x0482 (rev. 0x03)
eisa0 at pceb0
device CPQ3011 at eisa0 slot 2 not configured
mlx0 at eisa0 slot 7: Mylex RAID
mlx0: interrupting at eisa irq 14 (T2 irq 21)
mlx0: bad completion returned
mlx0: bad completion returned
mlx0: bad completion returned
mlx0: bad completion returned
mlx0: bad completion returned
mlx0: bad completion returned
mlx0: bad completion returned
mlx0: bad completion returned
mlx0: bad completion returned
mlx0: bad completion returned
mlx0: bad completion returned
mlx0: bad completion returned
....
And it continues. What's wrong? It can boot Digital Unix 4.0E...
From: Collin Baillie <Collin.Baillie@world.net>
Subject: RE: Support for alphaserver 2100?
Date: Fri, 7 Jun 2002 12:39:10 +1000
> Choi,
>
> The kernel you got from my web site (1.5ZA) should work fine for you if you
> hook up a serial console. I didn't even think of this! Of course if you want
> to try to use Murray's 1.6 stuff, go for it :)
>
> Collin
>
> -----Original Message-----
> From: Murray Armfield [mailto:murray.armfield@arconsulting.com.au]
> Sent: Friday, 7 June 2002 12:29 PM
> To: CHOI Junho
> Cc: port-alpha@netbsd.org
> Subject: Re: Support for alphaserver 2100?
>
>
> Hi,
> I got the same symptoms as you running graphics console. Serial
> console works
> great. I built the -current stuff myself, however I used a recent snapshot
> (1.5ZA or ZC IIRC) from pub/NetBSD/arch/alpha/snaphosts/ on ftp netbsd
> server
> IIRC to start with. Try that one. If you want I can put a snapshot on my ftp
>
> server sometime, just email me a request. Then I updated toolchain and built
>
> kernel all over NFS. Building userland as we speak....
> Its worth going over the SRM settings. Have a look at the FreeBSD
> doco on
> AS2100's. If you need any help with these just email.
>
> Take care,
> Murray Armfield
--
+++ Any opinions in this posting are my own and not those of my employers +++
CHOI Junho [sleeping now] <http://www.kr.FreeBSD.org/~cjh>
[while sleeping] <cjh @ kr.FreeBSD.ORG> <cjh @ FreeBSD.ORG> <cjh @ wdb.co.kr>
Korea FreeBSD Users Group <www.kr.FreeBSD.org> Web Data Bank<www.wdb.co.kr>