Subject: Status of Netbsd 1.6 and Alphaserver 2100A (lynx)
To: None <port-alpha@netbsd.org>
From: Chris Rupnik <crupnik@videotron.ca>
List: port-alpha
Date: 01/09/2003 13:05:42
Hi
 I have an alphaserver 2100a that is having an issue with the 1.6 install
kernel, as listed below

VMS PAL rev: 0x4000300010114
OSF PAL rev: 0x4000100020116
Switch to OSF PAL code succeeded.

Boot flags: A
8084288+227040=0x7ed5c0

Entering netbsd at 0xfffffc0000301290...
[ netbsd ELF symbol table not valid ]
[ no symbol table formats found ]
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6 (INSTALL) #0: Sun Sep  8 12:22:27 UTC 2002

autobuild@cs20.apochromatic.org:/autobuilder/build/alpha/OBJ/autobuilder/bui
ld/src/sys/arch/alpha/compile/INSTALL
AlphaServer 2100A 5/250, 250MHz, s/n ni621u0557
8192 byte page size, 1 processor.
total memory = 128 MB
(2120 KB reserved for PROM, 125 MB used by NetBSD)
avail memory = 109 MB
using 818 buffers containing 6544 KB of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21164-5
ttwoga0 at mainbus0
ttwopci0 at ttwoga0 hose 0: T3 or T4 Gate Array rev. 5
sableio0 at ttwopci0 bus 0: Sable STDIO module
pckbc0 at sableio0 port 0x60
fdc1 at sableio0 port 0x3f0
fdc1: interrupting at T2 irq 7
fd0 at fdc1 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
com0 at sableio0 port 0x3f8: ns16550a, working fifo
com0: console
com0: interrupting at T2 irq 15
com1 at sableio0 port 0x2f8: ns16550a, working fifo
com1: interrupting at T2 irq 8
lpt0 at sableio0 port 0x3bc
lpt0: interrupting at T2 irq 9
pci0 at ttwopci0 bus 0
pci0: i/o space, memory space enabled

halted CPU 0

halt code = 6
double error halt
PC = 19480
starting console on CPU 0


I noticed the call for tester that Jason put out in June 2000, so I believe
it is supported (although not in the netbsd/alpha page), and for what it is
worth, I was able to boot openvms to get to the install shell.

Attached is what I get when the system boots.

VMS PALcode V1.20-3, OSF PALcode V1.22-1

starting console on CPU 0
Testing Memory bank 0
Configuring Memory Modules
probing hose 0, PCI
probing PCI-to-EISA bridge, bus 1
probing PCI-to-PCI bridge, bus 2
bus 2, slot 0 -- ewa -- DECchip 21040-AA
bus 2, slot 1 -- pka -- NCR 53C810
bus 0, slot 6 -- pkb -- DEC KZPSA
bus 0, slot 8 -- ewb -- DECchip 21040-AA
bus 0, slot 9 -- pkc -- NCR 53C810
probing hose 1, PCI
bus 0, slot 6 -- pkd -- DEC KZPSA
bus 0, slot 7 -- fwa -- DEC PCI FDDI
os_type: UNIX - console CIPCA driver not started
Memory Testing and Configuration Status
Module   Size    Base Addr   Intlv Mode  Intlv Unit  Status
------   -----   ---------   ----------  ----------  ------
  0      128MB   00000000      1-Way         0       Passed
Total Bad Pages 0
Testing the System
Testing the Network
environment variable DRIVE_CD created
environment variable DRIVE_TAPE created
environment variable DRIVE_BOOT created
environment variable DRIVE_SIZE created
environment variable SYSTEM_NAME created
AlphaServer 2100A Console V5.2-62, built on May 26 1998 at 19:05:21

CPU 0 booting
P00>>>^C
P00>>>
P00>>>
P00>>>
P00>>>
P00>>>sh dev
dka500.5.0.2001.0          DKA500                        RRD45  1645
dva0.0.0.1000.0            DVA0                      RX26/RX23
ewa0.0.0.2000.0            EWA0              00-00-F8-20-5D-60
ewb0.0.0.8.0               EWB0              00-00-F8-21-73-A4
fwa0.0.0.7.1               FWA0              00-00-F8-BC-CD-07
pka0.7.0.2001.0            PKA0                  SCSI Bus ID 7
pkb0.6.0.6.0               PKB0                  SCSI Bus ID 6   P01  A12
pkc0.7.0.9.0               PKC0                  SCSI Bus ID 7
pkd0.6.0.6.1               PKD0                  SCSI Bus ID 6   P01  A12
P00>>>sh config
                        Digital Equipment Corporation
                           AlphaServer 2100A 5/250

SRM Console V5.2-62             VMS PALcode V1.20-3, OSF PALcode V1.22-1

Component       Status          Module ID
CPU 0              P            B2040-AB DECchip (tm) 21164-5
Memory 0           P            B2022-DA 128 MB
I/O                             24389-01
                                dva0.0.0.1000.0         RX26/RX23

 Slot   Option                  Hose 0, Bus 0, PCI
   2    Intel 82375                                     Bridge to Bus 1,
EISA
   3    DECchip 21050-AA                                Bridge to Bus 2, PCI
   6    DEC KZPSA               pkb0.6.0.6.0            SCSI Bus ID 6
   8    DECchip 21040-AA        ewb0.0.0.8.0            00-00-F8-21-73-A4
   9    NCR 53C810              pkc0.7.0.9.0            SCSI Bus ID 7

 Slot   Option                  Hose 0, Bus 1, EISA

 Slot   Option                  Hose 0, Bus 2, PCI
   0    DECchip 21040-AA        ewa0.0.0.2000.0         00-00-F8-20-5D-60
   1    NCR 53C810              pka0.7.0.2001.0         SCSI Bus ID 7
                                dka500.5.0.2001.0       RRD45

 Slot   Option                  Hose 1, Bus 0, PCI
   6    DEC KZPSA               pkd0.6.0.6.1            SCSI Bus ID 6
   7    DEC PCI FDDI            fwa0.0.0.7.1            00-00-F8-BC-CD-07
P00>>>