Subject: Re: Alpha release build times
To: Christian von Kleist <cvk@zybx.com>
From: Matt Thomas <matt@3am-software.com>
List: port-alpha
Date: 01/15/2003 08:50:17
At 08:37 AM 1/15/2003, Christian von Kleist wrote:
> ...and I thought 18 hours on an EV5 @ 500MHz was fast....
>
> What is the Alpha XP?
>>>show config
Compaq Computer Corporation
COMPAQ Professional Workstation XP1000
Firmware
SRM Console: V5.9-1 Dec 14 2000 16:04:15
ARC Console: 5.70
PALcode: OpenVMS PALcode V1.88-27, Tru64 UNIX PALcode V1.83-22
Serial Rom: SROM B1a
PIC: 0.36
Processor
DECchip (tm) 21264A-9 667MHz
Memory
512 MBytes of System Memory
Bank Size Base Addr Dimms
------ ---------- --------- -----
0 512 MBytes 00000000 1111
1 0 MBytes 00000000 0000
BCache Size = 4 MBytes
Slot Option Hose 0, Bus 0, PCI
7/0 Cypress 82C693 Bridge to Bus 1, ISA
7/1 Cypress 82C693 IDE dqa.0.0.107.0
dqa0.0.0.107.0 TOSHIBA CD-ROM
XM-6302B
7/2 Cypress 82C693 IDE dqb.0.1.207.0
7/3 Cypress 82C693 USB
13 630A1385/630A1385
Slot Option Hose 1, Bus 0, PCI
3 DECchip 21143-AA ewa0.0.0.3.1 00-10-64-30-A2-36
6 QLogic ISP10x0 pka0.7.0.6.1 SCSI Bus ID 7
dka0.0.0.6.1 RZ2DD-KS
dka100.1.0.6.1 HITACHI DK31CJ-72MC
8 DECchip 21152-AA Bridge to Bus 2, PCI
Slot Option Hose 1, Bus 2, PCI
ISA
Slot Device Name Type Enabled BaseAddr IRQ DMA
0
0 MOUSE Embedded Yes 60 12
1 KBD Embedded Yes 60 1
2 COM1 Embedded Yes 3f8 4
3 COM2 Embedded Yes 2f8 3
4 LPT1 Embedded Yes 3bc 7
5 FLOPPY Embedded Yes 3f0 6 2
6 EIDE Embedded Yes 1f0 14
3f6 15
170
376
7 ES1888 Embedded Yes 220 5 1
5
8 USB Embedded Yes 10
[ using 294704 bytes of netbsd ELF symbol table ]
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 1.6L (XPK) #31: Wed Jan 8 07:24:25 UTC 2003
matt@xpk.local:/u1/kobj/XPK
COMPAQ Professional Workstation XP1000, 666MHz, s/n AY0
8192 byte page size, 1 processor.
total memory = 512 MB
(1816 KB reserved for PROM, 510 MB used by NetBSD)
avail memory = 470 MB
using 3278 buffers containing 26224 KB of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21264A-9
cpu0: Architecture extensions: 307<PAT,MVI,CIX,FIX,BWX>
tsc0 at mainbus0: 21272 Core Logic Chipset, Cchip rev 0
tsc0: 4 Dchips, 1 memory bus of 32 bytes
tsc0: arrays present: 512MB, 0MB, 0MB, 0MB, Dchip 0 rev 1
tsp0 at tsc0
pci0 at tsp0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
sio0 at pci0 dev 7 function 0: Contaq Microsystems 82C693 PCI-ISA Bridge
(rev. 0
x00)
pciide0 at pci0 dev 7 function 1: Cypress 82C693 IDE Controller (rev. 0x00)
pciide0: bus-master DMA support present, but unused (registers at unsafe
address
0x10100)
pciide0: primary channel wired to compatibility mode
atapibus0 at pciide0 channel 0: 2 targets
cd0 at atapibus0 drive 0: <TOSHIBA CD-ROM XM-6302B, , 1017> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: primary channel interrupting at isa irq 14
cd0(pciide0:0:0): using PIO mode 4
pciide1 at pci0 dev 7 function 2: Cypress 82C693 IDE Controller (rev. 0x00)
pciide1: hardware does not support DMA
pciide1: primary channel wired to compatibility mode
pciide1: disabling primary channel (no drives)
ohci0 at pci0 dev 7 function 3: Contaq Microsystems 82C693 PCI-ISA Bridge
(rev.
0x00)
ohci0: interrupting at isa irq 10
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Contaq Microsys OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ti0 at pci0 dev 13 function 0: Netgear GA620 1000BASE-T Ethernet (rev. 0x01)
ti0: interrupting at dec 6600 irq 32
ti0: Ethernet address: 00:02:e3:00:36:de
isa0 at sio0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
lpt0 at isa0 port 0x3bc-0x3bf irq 7
ess0 at isa0 port 0x220-0x22f irq 5 drq 1,5
ess0: ESS Technology ES1887 [version 0x688b]
ess0: audio1 interrupting at irq 5
ess0: audio2 polled
audio0 at ess0: full duplex, mmap, independent
opl at ess0 not configured
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
tsp1 at tsc0
pci1 at tsp1 bus 0
pci1: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
tlp0 at pci1 dev 3 function 0: DECchip 21143 Ethernet, pass 4.1
tlp0: interrupting at dec 6600 irq 45
tlp0: Ethernet address 00:10:64:30:a2:36
tlp0: 10baseT, 10base2, 10base5, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isp0 at pci1 dev 6 function 0: QLogic 1020 Ultra Wide SCSI HBA
isp0: interrupting at dec 6600 irq 47
scsibus0 at isp0: 16 targets, 8 luns per target
ppb0 at pci1 dev 8 function 0: Digital Equipment DECchip 21152 PCI-PCI
Bridge (r
ev. 0x03)
pci2 at ppb0 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <DEC, RZ2DD-KS (C) DEC, 0306> disk fixed
sd0: 8678 MB, 5273 cyl, 20 head, 168 sec, 512 bytes/sect x 17773524 sectors
sd0: sync (50.0ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
sd1 at scsibus0 target 1 lun 0: <HITACHI, DK31CJ-72MC, JBBB> disk fixed
sd1: 70513 MB, 15314 cyl, 24 head, 392 sec, 512 bytes/sect x 144410880 sectors
sd1: sync (50.0ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
root on sd1a dumps on sd1b
root file system type: ffs
ti0: gigabit link up
--
Matt Thomas Internet: matt@3am-software.com
3am Software Foundry WWW URL: http://www.3am-software.com/bio/matt/
Cupertino, CA Disclaimer: I avow all knowledge of this message