----- Original Message -----
From: "Christos Zoulas" <christos@zoulas.com>
To: <port-alpha@netbsd.org>
Sent: Tuesday, January 28, 2003 3:25 PM
Subject: Re: isapnp and Alpha AXPpci33 (Noname) (PART II)


> In article <000901c2c6cf$4eafcff0$0c01a8c0@pc12>,
> Pierre Emmanuel Brinette <brinette@hrnet.fr> wrote:
> >(Help need, PART 2)
> >
> >> Hello,
> >>
> >>   I have a 3c509 card in PnP mode. This card is configured (on a PC
box)
> >at
> >> 0x300/irq 5. On the Alpha box (AxpPci33), the isapnp module allocate
this
> >> device at 0x210/irq 3 (on the COM2 interrupt). The card wont work whit
> >this
> >> settings.
> >>
> >> It tried to use the isapnptools package, but it doesnt exist for Alpha.
> >
> >I have made another tests, this time in jumperless mode (0x300/irq 5)
> >
> >at boot time, I have this message
> >----
> >..
> >ep0 at isa0 port 0x300-0x30f irq 5: 3Com 3C509 Ethernet
> >ep0: address 00:20:af:c0:09:44, 8KB byte-wide FIFO, 5:3 Rx:Tx split
> >ep0: 10baseT, 10base5, 10base2 (default 10baseT)
> >alpha_shared_intr_establish: isa irq 5: warning: using edge-triggered on
> >level-triggered
> >...
> >
> >The IRQ5 seem not to be shared on my system, and when the interface goes
up,
> >the system freeze.
>
> Can you try with a kernel with DEBUG_ISAPNP compiled in? What are the
> available configurations of ths card?
>
> christos
>

I've retried with the 3c509 configured at 0x300/irq 15 in Jumperless mode.
Now it work fine. I think that the irq 5 on AXPPci33 is reserved for special
purpose. Since the card is in irq 15, I've not the warning message "warning:
using edge-triggered on level-triggered".

I will try the kernel option soon, thanks for the information

Pierre-Emmanuel Brinette