Hi,

just got this "brand new" XP1000 (which soon needs to run TruNix :-(
for the time being) and tried to boot NetBSD (2.0 and -current
snapshots from releng) but got a fatal error while probing cypide0
(s. below). Any ideas what I can/should do to get this machine
up and running NetBSD?

Thanks in advance,

-kurt


Entering netbsd at 0xfffffc00003012e0...
consinit: not using prom console
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 2.0_BETA (GENERIC) #0: Thu May 27 04:13:43 UTC 2004
        autobuild@tgm.netbsd.org:/autobuild/netbsd-2-0/alpha/OBJ/autobuild/netbsd-2-0/src/sys/arch/alpha/compile/GENERIC
COMPAQ Professional Workstation XP1000, 500MHz, s/n 
8192 byte page size, 1 processor.
total memory = 640 MB
(1728 KB reserved for PROM, 638 MB used by NetBSD)
avail memory = 618 MB
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21264-3
cpu0: Architecture extensions: 303<PAT,MVI,FIX,BWX>
tsc0 at mainbus0: 21272 Core Logic Chipset, Cchip rev 0
tsc0: 4 Dchips, 1 memory bus of 32 bytes
tsc0: arrays present: 512MB (split), 128MB (split), 0MB, 0MB, Dchip 0 rev 1
tsp0 at tsc0
pci0 at tsp0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
sio0 at pci0 dev 7 function 0: Contaq Microsystems 82C693 PCI-ISA Bridge (rev. 0x00)
cypide0 at pci0 dev 7 function 1
cypide0: Cypress 82C693 IDE Controller (rev. 0x00)
cypide0: bus-master DMA support present, but unused (registers at unsafe address 0x10000)
CPU 0: fatal kernel trap:

CPU 0    trap entry = 0x2 (memory management fault)
CPU 0    a0         = 0x0
CPU 0    a1         = 0x1
CPU 0    a2         = 0x0
CPU 0    pc         = 0xfffffc00006ab8dc
CPU 0    ra         = 0xfffffc00006ab8a0
CPU 0    pv         = 0xfffffc000058dc10
CPU 0    curlwp    = 0xfffffc00009dcaf8
CPU 0        pid = 0, comm = swapper

panic: trap
Stopped in pid 0.1 (swapper) at netbsd:cpu_Debugger+0x4:        ret     zero,(ra
)

db> bt
cpu_Debugger() at netbsd:cpu_Debugger+0x4
panic() at netbsd:panic+0x1f8
trap() at netbsd:trap+0x120
XentMM() at netbsd:XentMM+0x20
--- memory management fault (from ipl 6) ---
pciide_mapreg_dma() at netbsd:pciide_mapreg_dma+0xbc
cy693_chip_map() at netbsd:cy693_chip_map+0xe0
pciide_common_attach() at netbsd:pciide_common_attach+0xec
cypide_attach() at netbsd:cypide_attach+0x50
config_attach() at netbsd:config_attach+0x314
config_found_sm() at netbsd:config_found_sm+0x54
pci_probe_device() at netbsd:pci_probe_device+0x2b0
pci_enumerate_bus_generic() at netbsd:pci_enumerate_bus_generic+0x204
pciattach() at netbsd:pciattach+0x204
config_attach() at netbsd:config_attach+0x314
config_found_sm() at netbsd:config_found_sm+0x54
tspattach() at netbsd:tspattach+0x10c
config_attach() at netbsd:config_attach+0x314
config_found_sm() at netbsd:config_found_sm+0x54
tscattach() at netbsd:tscattach+0x1e8
config_attach() at netbsd:config_attach+0x314
config_found_sm() at netbsd:config_found_sm+0x54
mbattach() at netbsd:mbattach+0x140
config_attach() at netbsd:config_attach+0x314
config_rootfound() at netbsd:config_rootfound+0x4c
cpu_configure() at netbsd:cpu_configure+0x4c
configure() at netbsd:configure+0x68
main() at netbsd:main+0x460
locorestart() at netbsd:locorestart+0x64
--- root of call graph ---
db>