Port-alpha archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Interested in USB for TURBOchannel (slhci at tc)?
Hi,
tinkering with a Lattice CPLD break-out board and a Waveshape SL811HS
USB board showed success: I was able to interface the SL811HS and
TURBOchannel of my DEC 3000/400. Code for "slhci at tc" was easy, as the
slhci driver seems mature (and portable) already.
The CPLD features a TC interface up to 25 MHz, is capable of I/O
transactions and interrupts, and even contains a basic option ROM as
required by TC systems' firmware.
It is a horribly "flying" lab setup with single wires between all the
connectors at the moment (hardly stable of course, but sometimes :)),
but I plan to design a "real" TC option module with custom PCB and even
bulkhead for myself (and others if interested) which will solve all
stability problems I hope.
Do not expect it to be fast, SL811HS is a USB 1.1 controller (12 Mbit/s)
and its 8-bit interface is sub-optimal (and errata-prone). I calculated
SL811HS peak data rate over an optimal (back-to-back) TURBOchannel to be
~1.25 MB/s for 12.5 MHz TC systems, and ~2.08 MB/s for 25 MHz systems.
Actual devices on the bus will show slower results of course.
Is anyone else interested in such a TC-USB option? I could kick-off a
hobbyist maker project of professionally made modules (you would get the
assembled thing with parts soldered to a PCB, CPLD programmed and
bulkhead mounted) then. Costs depend on amount ordered of course, but
even for prototype/smallest volume I see it far below USD $100. I will
not earn a single cent. Otherwise I will build manually for myself only.
So please excuse cross-posting to the three TC-capable platforms (pmax,
alpha, vax). It's a NetBSD special right now :)
More info is and will be available here (doc, pics, code, ...):
http://www.flxd.de/tc-usb/
And the alpha port seems to have really broken bus functions for widths
<= 4 (dense vs. sparse TC space etc.). I will also come up with a patch
for that soon.
Comments and suggestions welcome!
Regards,
Felix
Home |
Main Index |
Thread Index |
Old Index