Subject: Re: sk on ASUS K8V SE Delux
To: None <port-amd64@netbsd.org>
From: Wouter Schoot <wouter@schoot.org>
List: port-amd64
Date: 12/11/2004 01:03:13
This is a multi-part message in MIME format.
--------------070605040504030405010208
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Wouter Schoot wrote:
> When I bios-wise disable USB at all, it just shares the IRQ with the IDE
> controller. I now get some watchdog timeouts, but still dhclient won't
> find an IP to work with.
To reply myself even more, the following test. It takes place with USB
turned off.
The case is, the card wont detect an IP. However, when I set another IP
manually to the card (Brining it up) it can ping around after a delay of
about 4 seconds. When I then try to dhclient the card, it gets an IP and
it pings nicely en delaylessly.
Something is very weird here.
Attached is the typescript.
Wouter
--------------070605040504030405010208
Content-Type: text/plain;
name="typescript"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="typescript"
Script started on Sat Dec 11 00:54:23 2004
# bash
bash-2.05b# ls
.bash_history .ssh if_skreg.h_patch
.cpan .viminfo if_skvar.h_patch
.cshrc .vimrc sip
.cvspass ASCENT64 siproxd-0.5.10
.klogin ASCENT64-2 siproxd-0.5.9
.login asterisk-1.0.3 siproxd-0.5.9.tar.gz
.profile asterisk-1.0.3.tar.gz siproxd-08Dec2004.tar.gz
.shrc if_sk.c_patch typescript
bash-2.05b# ifconfig -a
mtd0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
address: 00:02:44:7a:0c:9e
sk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
address: 00:11:2f:d2:be:4e
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet6 fe80::211:2fff:fed2:be4e%sk0 prefixlen 64 scopeid 0x2
mtd1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
address: 00:02:44:7b:0d:15
lo0: flags=8009<UP,LOOPBACK,MULTICAST> mtu 33648
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
ppp1: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
sl1: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
bash-2.05b# [s ai[Kps aux | grep dhcl
root 222 0.0 0.1 888 768 ?? Is 12:53AM 0:00.00 /sbin/dhclient sk0
root 102 0.0 0.1 180 700 p0 S+ 12:54AM 0:00.00 grep dhcl
bash-2.05b# kill [Kpkill dhclient
bash-2.05b# dhclient dk s sk0
Internet Software Consortium DHCP Client V3.0.1rc11
Copyright 1995-2002 Internet Software Consortium.
All rights reserved.
For info, please visit http://www.isc.org/products/DHCP
Listening on BPF/sk0/00:11:2f:d2:be:4e
Sending on BPF/sk0/00:11:2f:d2:be:4e
Sending on Socket/fallback
DHCPREQUEST on sk0 to 255.255.255.255 port 67
DHCPREQUEST on sk0 to 255.255.255.255 port 67
DHCPREQUEST on sk0 to 255.255.255.255 port 67
DHCPDISCOVER on sk0 to 255.255.255.255 port 67 interval 8
DHCPDISCOVER on sk0 to 255.255.255.255 port 67 interval 12
DHCPDISCOVER on sk0 to 255.255.255.255 port 67 interval 16
DHCPDISCOVER on sk0 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on sk0 to 255.255.255.255 port 67 interval 14
DHCPDISCOVER on sk0 to 255.255.255.255 port 67 interval 1
No DHCPOFFERS received.
Trying recorded lease 10.0.0.2
New Network Number: 10.0.0.0
New Broadcast Address: 10.0.0.255
PING 10.0.0.1 (10.0.0.1): 56 data bytes
----10.0.0.1 PING Statistics----
1 packets transmitted, 0 packets received, 100.0% packet loss
No working leases in persistent database - sleeping.
bash-2.05b# ifconfig -a
mtd0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
address: 00:02:44:7a:0c:9e
sk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
address: 00:11:2f:d2:be:4e
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet6 fe80::211:2fff:fed2:be4e%sk0 prefixlen 64 scopeid 0x2
mtd1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
address: 00:02:44:7b:0d:15
lo0: flags=8009<UP,LOOPBACK,MULTICAST> mtu 33648
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
ppp1: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
sl1: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
bash-2.05b# ifconfig 10.0.0.2[Ksk0 10.0.0.230 30 up
bash-2.05b# ping 10.0.0.1
PING ascent.crib (10.0.0.1): 56 data bytes
64 bytes from 10.0.0.1: icmp_seq=0 ttl=255 time=0.274 ms
64 bytes from 10.0.0.1: icmp_seq=1 ttl=255 time=0.220 ms
^C
----ascent.crib PING Statistics----
2 packets transmitted, 2 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.220/0.247/0.274/0.038 ms
bash-2.05b# # 4 secs delay
bash-2.05b# # 4 sces delay
bash-2.05b# ping 10.0.0.1[Kifconfig sk0 10.0.0.30 up-a[Kdhclient sk0
Internet Software Consortium DHCP Client V3.0.1rc11
Copyright 1995-2002 Internet Software Consortium.
All rights reserved.
For info, please visit http://www.isc.org/products/DHCP
Listening on BPF/sk0/00:11:2f:d2:be:4e
Sending on BPF/sk0/00:11:2f:d2:be:4e
Can't bind to dhcp address: Address already in use
Please make sure there is no other dhcp server
running and that there's no entry for dhcp or
bootp in /etc/inetd.conf. Also make sure you
are not running HP JetAdmin software, which
includes a bootp server.
If you did not get this software from ftp.isc.org, please
get the latest from ftp.isc.org and install that before
requesting help.
If you did get this software from ftp.isc.org and have not
yet read the README, please read it before requesting help.
If you intend to request help from the dhcp-server@isc.org
mailing list, please read the section on the README about
submitting bug reports and requests for help.
Please do not under any circumstances send requests for
help directly to the authors of this software - please
send them to the appropriate mailing list as described in
the README file.
exiting.
bash-2.05b#
(reverse-i-search)`': p': ping 10.0.0.1k': pkill dhclienti': pkill dhclientl': pkill dhclient
bash-2.05b# pkill dhclient[K
bash-2.05b#
bash-2.05b# pkill dhclient
bash-2.05b# dhclient sk0[K
Internet Software Consortium DHCP Client V3.0.1rc11
Copyright 1995-2002 Internet Software Consortium.
All rights reserved.
For info, please visit http://www.isc.org/products/DHCP
Listening on BPF/sk0/00:11:2f:d2:be:4e
Sending on BPF/sk0/00:11:2f:d2:be:4e
Sending on Socket/fallback
DHCPREQUEST on sk0 to 255.255.255.255 port 67
DHCPACK from 10.0.0.1
New Network Number: 10.0.0.0
New Broadcast Address: 10.0.0.255
bound to 10.0.0.2 -- renewal in 1668 seconds.
bash-2.05b# dhclient sk0pkill dhclient
bash-2.05b# dhclient sk0[K# 4 sces delay
bash-2.05b# ping 10.0.0.1[K
PING ascent.crib (10.0.0.1): 56 data bytes
64 bytes from 10.0.0.1: icmp_seq=0 ttl=255 time=0.339 ms
64 bytes from 10.0.0.1: icmp_seq=1 ttl=255 time=0.216 ms
^C
----ascent.crib PING Statistics----
2 packets transmitted, 2 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.216/0.277/0.339/0.087 ms
bash-2.05b# exit
#
Script done on Sat Dec 11 00:57:09 2004
--------------070605040504030405010208--