People seem to ask about what is and what isn't supported a lot on
this list, so I figure I will post the dmesg from my Abit AV8 running
a current kernel as of yesterday. I slightly re-configured it, but not
much. It's mostly GENERIC. If this is annoying, someone say so and
I'll stop. I thought it would be useful.

I have added a few cards, a Qlogic scsi controller, an Adaptec scsi
controller, and fxp Intel card... And I think that's it.

Notable things that aren't supported:

o Built in Via gigabit ethernet
o Built in 1394 (firewire) controller

I thought I heard rumblings about a patch for the ethernet card, I'll
have to look for that.

Also, SMBFS should work if you just add the related lines to the
kernel config. I did this to my 2.0-release kernel, which is the one I
usually use. I have had no problems with it connecting to a 2.2.8
Samba server.

NetBSD 2.99.15 (SPEEDY-CURRENT1) #1: Tue Feb  8 06:57:40 MST 2005
        root@speedy.andy.com:/usr/obj-current/sys/arch/amd64/compile/SPEEDY-CURR
ENT1
total memory = 1023 MB
avail memory = 974 MB
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (OEM00000 PROD00000000)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) 64 Processor 3000+, 1838.95 MHz
cpu0: features: e7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: e7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features: e7dbfbff<FXSR,SSE,SSE2,LONG,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 512 KB 64B/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: calibrating local timer
cpu0: apic clock running at 204 MHz
cpu0: 8 page colors
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type ISA
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 3, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies product 0x0282 (rev. 0x00)
pchb1 at pci0 dev 0 function 1
pchb1: VIA Technologies product 0x1282 (rev. 0x00)
pchb2 at pci0 dev 0 function 2
pchb2: VIA Technologies product 0x2282 (rev. 0x00)
pchb3 at pci0 dev 0 function 3
pchb3: VIA Technologies product 0x3282 (rev. 0x00)
pchb4 at pci0 dev 0 function 4
pchb4: VIA Technologies product 0x4282 (rev. 0x00)
pchb5 at pci0 dev 0 function 7
pchb5: VIA Technologies product 0x7282 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: VIA Technologies product 0xb188 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: ATI Technologies product 0x4966 (rev. 0x01)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ATI Technologies product 0x496e (miscellaneous display, revision 0x01) at pci1 d
ev 0 function 1 not configured
VIA Technologies VT6306 IEEE 1394 Host Controller (Firewire serial bus, interfac
e 0x10, revision 0x46) at pci0 dev 7 function 0 not configured
isp0 at pci0 dev 10 function 0: QLogic Dual Channel Ultra-2 Wide SCSI HBA
isp0: interrupting at ioapic0 pin 18 (irq 10)
scsibus0 at isp0 channel 0: 16 targets, 8 luns per target
scsibus1 at isp0 channel 1: 16 targets, 8 luns per target
ahc0 at pci0 dev 11 function 0: Adaptec 2940 Ultra SCSI adapter
ahc0: interrupting at ioapic0 pin 19 (irq 11)
ahc0: aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
scsibus2 at ahc0: 16 targets, 8 luns per target
fxp0 at pci0 dev 12 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at ioapic0 pin 20 (irq 11)
fxp0: Ethernet address 00:90:27:e9:2b:fe
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
VIA Technologies VT61XX (Velocity) 10/100/1000 Ethernet (ethernet network, revis
ion 0x11) at pci0 dev 14 function 0 not configured
viaide0 at pci0 dev 15 function 0
viaide0: VIA Technologies VT8237 SATA Controller (rev. 0x80)
viaide0: bus-master DMA support present
viaide0: primary channel wired to native-PCI mode
viaide0: using ioapic0 pin 20 (irq 5) for native-PCI interrupt
atabus0 at viaide0 channel 0
viaide0: secondary channel wired to native-PCI mode
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 15 function 1
viaide1: VIA Technologies VT8237 ATA133 controller
viaide1: bus-master DMA support present
viaide1: primary channel configured to compatibility mode
viaide1: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus2 at viaide1 channel 0
viaide1: secondary channel configured to compatibility mode
viaide1: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus3 at viaide1 channel 1
uhci0 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB Controller (rev.
0x81)
uhci0: interrupting at ioapic0 pin 21 (irq 5)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB Controller (rev.
0x81)
uhci1: interrupting at ioapic0 pin 21 (irq 5)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB Controller (rev.
0x81)
uhci2: interrupting at ioapic0 pin 21 (irq 5)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3: VIA Technologies VT83C572 USB Controller (rev.
0x81)
uhci3: interrupting at ioapic0 pin 21 (irq 5)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
VIA Technologies VT8237 EHCI USB Controller (USB serial bus, interface 0x20, rev
ision 0x86) at pci0 dev 16 function 4 not configured
pcib0 at pci0 dev 17 function 0
pcib0: VIA Technologies VT8237 (Apollo KT600) PCI-ISA Bridge (rev. 0x00)
auvia0 at pci0 dev 17 function 5: VIA Technologies VT8237 AC'97 Audio (rev 0x60)
auvia0: interrupting at ioapic0 pin 22 (irq 10)
auvia0: ac97: Avance Logic ALC658 codec; 20 bit DAC, 18 bit ADC, no 3D stereo
auvia0: ac97: ext id 9c7<AC97_23,LDAC,SDAC,CDAC,SPDIF,DRA,VRA>
audio0 at auvia0: full duplex, mmap, independent
pchb6 at pci0 dev 24 function 0
pchb6: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb7 at pci0 dev 24 function 1
pchb7: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb8 at pci0 dev 24 function 2
pchb8: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb9 at pci0 dev 24 function 3
pchb9: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
ioapic0: enabling
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
scsibus2: waiting 2 seconds for devices to settle...
ulpt0 at uhub1 port 1 configuration 1 interface 0
ulpt0: Lexmark Lexmark Z600 Series, rev 2.00/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
sd0 at scsibus0 target 0 lun 0: <IBM, DDYS-T09170M, S94N> disk fixed
sd0: async, 8-bit transfers
sd0: 8748 MB, 15110 cyl, 3 head, 395 sec, 512 bytes/sect x 17916240 sectors
sd0: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
sd1 at scsibus0 target 1 lun 0: <IBM, DPSS-309170N, S9HA> disk fixed
sd1: async, 8-bit transfers
sd1: 8678 MB, 14627 cyl, 3 head, 405 sec, 512 bytes/sect x 17774160 sectors
sd1: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
wd0 at atabus2 drive 0: <Maxtor 6B120P0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 114 GB, 238216 cyl, 16 head, 63 sec, 512 bytes/sect x 240121728 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
cd0 at scsibus2 target 4 lun 0: <PIONEER, DVD-ROM DVD-305, 1.00> cdrom removable
cd0: sync (50.00ns offset 15), 8-bit (20.000MB/s) transfers
cd1 at scsibus2 target 6 lun 0: <YAMAHA, CRW8824S, 1.0a> cdrom removable
cd1: sync (50.00ns offset 15), 8-bit (20.000MB/s) transfers
boot device: wd0
root on wd0j dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)