------=_Part_521_22783207.1110777058594
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

Hello,

      I am trying to install NetBSD 2.0 on an HP 736N (amd64) box. 
The boot eventually hangs; here is a copy of the error (apologies for
typos, as I cant get the install to proceed I had to copy down the
error by hand):

siside0:0:0: lost interrupt
    type: ata tc_bcount: 512, tc_sckip: 0
siside0:0:0: bus-master DMA error: missing interrupt, status=0x21
siside0:0:0: device timeout, c_bcount=512, c_skip0
wd0: transfer error, downgrading to PIO mode 4
wd0(siside0:0:0): using PIO mode 4
wd0d: device timeout reading fsbn0 (wd0 bn 0, tn 0, sn 0), retrying.

This happens with both the i386 and amd64 builds on this machine.  I
did attach a boot log from FreeBSD which I have been using on the
machine in the meantime, as FreeBSD and Linux seem to work fine and
without complaint, so I did not suspect a hardware issue at this
point.  Has anyone run into this?

--
Chris A

http://www.asty.org

------=_Part_521_22783207.1110777058594
Content-Type: text/plain; name="freebsdboot.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment; filename="freebsdboot.txt"

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
=09The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #1: Thu Mar 10 20:48:51 EST 2005
    root@gritch:/usr/src/sys/amd64/compile/GRITCH
ACPI APIC Table: <AWARD  AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3200+ (2210.26-MHz K8-class CPU)
  Origin =3D "AuthenticAMD"  Id =3D 0xfc0  Stepping =3D 0
  Features=3D0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=3D0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory  =3D 1073676288 (1023 MB)
avail memory =3D 1025646592 (978 MB)
ioapic0 <Version 1.4> irqs 0-23 on motherboard
acpi0: <AWARD AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x10e0-0x10ff,0x1000-0x10df,0x480-0x48f,=
0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 964 UDMA133 controller> port 0x4000-0x400f,0x376,0x170-0x177,=
0x3f6,0x1f0-0x1f7 at device 2.5 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pcm0: <SiS 7012> port 0xd400-0xd47f,0xd000-0xd0ff irq 18 at device 2.7 on p=
ci0
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC658 AC97 Codec>
ohci0: <SiS 5571 USB controller> mem 0xef004000-0xef004fff irq 20 at device=
 3.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
umass0: Alcor Micro USB Reader, rev 1.10/1.00, addr 2
ohci1: <SiS 5571 USB controller> mem 0xef000000-0xef000fff irq 21 at device=
 3.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ums0: Logitech USB Mouse, rev 1.10/6.20, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
ohci2: <SiS 5571 USB controller> mem 0xef001000-0xef001fff irq 22 at device=
 3.2 on pci0
ohci2: [GIANT-LOCKED]
usb2: OHCI version 1.0, legacy support
usb2: <SiS 5571 USB controller> on ohci2
usb2: USB revision 1.0
uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 3.3 (no driver attached)
sis0: <SiS 900 10/100BaseTX> port 0xd800-0xd8ff mem 0xef003000-0xef003fff i=
rq 19 at device 4.0 on pci0
miibus0: <MII bus> on sis0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: <ADMtek AN985 10/100BaseTX> port 0xdc00-0xdcff mem 0xef005000-0xef0053=
ff irq 17 at device 9.0 on pci0
miibus1: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: Ethernet address: 00:20:78:1f:ad:a1
dc0: if_start running deferred for Giant
dc0: [GIANT-LOCKED]
pci0: <simple comms> at device 10.0 (no driver attached)
fwohci0: <VIA Fire II (VT6306)> port 0xe800-0xe87f mem 0xef007000-0xef0077f=
f irq 16 at device 11.0 on pci0
fwohci0: OHCI version 1.0 (ROM=3D1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:18:00:00:ab:ce:76
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:ab:ce:76
fwe0: Ethernet address: 02:e0:18:ab:ce:76
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me)
firewire0: bus manager 0 (me)
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acp=
i0
sio0: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd9fff,0xc0000-0xcf7ff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2210256379 Hz quality 800
Timecounters tick every 0.976 msec
ad0: 238475MB <WDC WD2500JB-00FUA0/15.05R15> [484521/16/63] at ata0-master =
UDMA100
acd0: CDRW <LITE-ON DVD+RW SOHW-822S/VPPA> at ata1-master UDMA33
acd1: CDROM <ASUS CD-S480/AH/0.89> at ata1-slave UDMA33
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device=20
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device=20
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0 device=20
da2: 1.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device=20
da3: 1.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present

------=_Part_521_22783207.1110777058594--