This is a multi-part message in MIME format.

------=_NextPart_000_000E_01C5314D.E0A9BBB0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

----- Original Message -----=20
From: "Wolfgang Solfrank" <ws@tools.de>
To: "Frank van der Linden" <fvdl@NetBSD.org>
Cc: <cedwards@ripples.dyndns.org>; <port-amd64@NetBSD.org>
Sent: Thursday, March 24, 2005 5:51 AM
Subject: Re: Interrupt problems on Iwill DK8N: nForce3 250 + AMD 8131

> Otherwise, maybe Chris can test with a (more) current kernel?


Thanks, Wolfgang, I was thinking I might try out a current kernel =
anyway.

Things do look more promising using the current kernel source, although =
the MegaRAID card still seems to be having interrupt issues (see the =
attached kernel output).  It was also a pleasant surprise to find =
nForce3 integrated audio working and the ATA controller now using the =
viaide driver.  Nice.

I found that the joe editor and X11 wouldn't run under this kernel (both =
fail with a signal 11), although note that the X-server is the one from =
the 2.0 distribution.

Happy Easter to all...
--
Chris

------=_NextPart_000_000E_01C5314D.E0A9BBB0
Content-Type: text/plain;
	name="dmesg-current-mp.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
	filename="dmesg-current-mp.txt"

Loaded initial symtab at 0xffffffff8094a658, strtab at =
0xffffffff809c4120, # entries 19361=0A=
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005=0A=
    The NetBSD Foundation, Inc.  All rights reserved.=0A=
Copyright (c) 1982, 1986, 1989, 1991, 1993=0A=
    The Regents of the University of California.  All rights reserved.=0A=

NetBSD 3.99.1 (TEST.MP) #1: Fri Mar 25 14:15:36 NZST 2005=0A=
	root@:/mnt/wd3i/src/netbsd/current/obj/sys/arch/amd64/compile/TEST.MP=0A=
total memory =3D 2046 MB=0A=
avail memory =3D 1955 MB=0A=
mainbus0 (root)=0A=
mainbus0: scanning 0x9fc00 to 0x9fff0 for MP signature=0A=
mainbus0: scanning 0x9ec00 to 0x9eff0 for MP signature=0A=
mainbus0: scanning 0xf0000 to 0xffff0 for MP signature=0A=
mainbus0: MP floating pointer found in bios at 0xff780=0A=
mainbus0: MP config table at 0xfaa30, 324 bytes long=0A=
cpu0 at mainbus0: apid 0 (boot processor)=0A=
cpu0: AMD Opteron(tm) Processor 244, 1800.08 MHz=0A=
cpu0: features: =
e7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>=0A=
cpu0: features: e7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>=0A=
cpu0: features: e7dbfbff<FXSR,SSE,SSE2,LONG,3DNOW2,3DNOW>=0A=
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way=0A=
cpu0: L2 cache 1 MB 64B/line 16-way=0A=
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully =
associative=0A=
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully =
associative=0A=
cpu0: calibrating local timer=0A=
cpu0: apic clock running at 199 MHz=0A=
cpu0: 16 page colors=0A=
cpu0: kstack at 0xffff80000ec6a000 for 20480 bytes=0A=
cpu0: idle pcb at 0xffff80000ec6a000, idle sp at 0xffff80000ec6eff0=0A=
cpu1 at mainbus0: apid 1 (application processor)=0A=
cpu1: starting=0A=
cpu1: AMD Opteron(tm) Processor 244, 1800.00 MHz=0A=
cpu1: features: =
e7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>=0A=
cpu1: features: e7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>=0A=
cpu1: features: e7dbfbff<FXSR,SSE,SSE2,LONG,3DNOW2,3DNOW>=0A=
cpu1: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way=0A=
cpu1: L2 cache 1 MB 64B/line 16-way=0A=
cpu1: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully =
associative=0A=
cpu1: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully =
associative=0A=
cpu1: kstack at 0xffff80000ec6f000 for 20480 bytes=0A=
cpu1: idle pcb at 0xffff80000ec6f000, idle sp at 0xffff80000ec73ff0=0A=
ioapic0 at mainbus0 apid 2 (I/O APIC)=0A=
ioapic0: pa 0xfec00000, virtual wire mode, version 11, 24 pins=0A=
ioapic1 at mainbus0 apid 3 (I/O APIC)=0A=
ioapic1: pa 0xfebfe000, virtual wire mode, version 11, 4 pins=0A=
ioapic2 at mainbus0 apid 4 (I/O APIC)=0A=
ioapic2: pa 0xfebff000, virtual wire mode, version 11, 4 pins=0A=
acpi0 at mainbus0=0A=
acpi0: using Intel ACPI CA subsystem version 20040211=0A=
acpi0: X/RSDT: OemId <A M I ,OEMXSDT ,10000414>, AslId <MSFT,00000097>=0A=
acpi0: SCI interrupting at int 9=0A=
acpi0: fixed-feature power button present=0A=
mpacpi: found root PCI bus 0 at level 1=0A=
mpacpi: found subordinate bus 1 at level 2=0A=
mpacpi: found subordinate bus 5 at level 2=0A=
mpacpi: found subordinate bus 4 at level 2=0A=
mpacpi: 4 PCI busses=0A=
mpacpi: configuring PCI bus 0 int routing=0A=
mpacpi: configuring PCI bus 1 int routing=0A=
mpacpi: configuring PCI bus 5 int routing=0A=
mpacpi: configuring PCI bus 4 int routing=0A=
ioapic0: pin 2 attached to isa0 irq 0 (type 0<type=3D0> flags =
0<pol=3D0,trig=3D0>)=0A=
ioapic0: pin 1 attached to isa0 irq 1 (type 0<type=3D0> flags =
0<pol=3D0,trig=3D0>)=0A=
ioapic0: pin 3 attached to isa0 irq 3 (type 0<type=3D0> flags =
0<pol=3D0,trig=3D0>)=0A=
ioapic0: pin 4 attached to isa0 irq 4 (type 0<type=3D0> flags =
0<pol=3D0,trig=3D0>)=0A=
ioapic0: pin 5 attached to isa0 irq 5 (type 0<type=3D0> flags =
0<pol=3D0,trig=3D0>)=0A=
ioapic0: pin 6 attached to isa0 irq 6 (type 0<type=3D0> flags =
0<pol=3D0,trig=3D0>)=0A=
ioapic0: pin 7 attached to isa0 irq 7 (type 0<type=3D0> flags =
0<pol=3D0,trig=3D0>)=0A=
ioapic0: pin 8 attached to isa0 irq 8 (type 0<type=3D0> flags =
0<pol=3D0,trig=3D0>)=0A=
ioapic0: pin 9 attached to isa0 irq 9 (type 0<type=3D0> flags =
d<pol=3D1=3DAct Hi,trig=3D3=3DLevel>)=0A=
ioapic0: pin 10 attached to isa0 irq 10 (type 0<type=3D0> flags =
0<pol=3D0,trig=3D0>)=0A=
ioapic0: pin 11 attached to isa0 irq 11 (type 0<type=3D0> flags =
0<pol=3D0,trig=3D0>)=0A=
ioapic0: pin 12 attached to isa0 irq 12 (type 0<type=3D0> flags =
0<pol=3D0,trig=3D0>)=0A=
ioapic0: pin 13 attached to isa0 irq 13 (type 0<type=3D0> flags =
0<pol=3D0,trig=3D0>)=0A=
ioapic0: pin 14 attached to isa0 irq 14 (type 0<type=3D0> flags =
5<pol=3D1=3DAct Hi,trig=3D1=3DEdge>)=0A=
ioapic0: pin 15 attached to isa0 irq 15 (type 0<type=3D0> flags =
5<pol=3D1=3DAct Hi,trig=3D1=3DEdge>)=0A=
ioapic1: pin 1 attached to pci5 device 1 INT_A (type 0<type=3D0> flags =
f<pol=3D3=3DAct Lo,trig=3D3=3DLevel>)=0A=
ioapic1: pin 2 attached to pci5 device 1 INT_B (type 0<type=3D0> flags =
f<pol=3D3=3DAct Lo,trig=3D3=3DLevel>)=0A=
ioapic1: pin 3 attached to pci5 device 1 INT_C (type 0<type=3D0> flags =
f<pol=3D3=3DAct Lo,trig=3D3=3DLevel>)=0A=
ioapic1: pin 0 attached to pci5 device 1 INT_D (type 0<type=3D0> flags =
f<pol=3D3=3DAct Lo,trig=3D3=3DLevel>)=0A=
ioapic1: pin 2 attached to pci5 device 2 INT_A (type 0<type=3D0> flags =
f<pol=3D3=3DAct Lo,trig=3D3=3DLevel>)=0A=
ioapic1: pin 3 attached to pci5 device 2 INT_B (type 0<type=3D0> flags =
f<pol=3D3=3DAct Lo,trig=3D3=3DLevel>)=0A=
ioapic1: pin 0 attached to pci5 device 2 INT_C (type 0<type=3D0> flags =
f<pol=3D3=3DAct Lo,trig=3D3=3DLevel>)=0A=
ioapic1: pin 1 attached to pci5 device 2 INT_D (type 0<type=3D0> flags =
f<pol=3D3=3DAct Lo,trig=3D3=3DLevel>)=0A=
ioapic1: pin 3 attached to pci5 device 3 INT_A (type 0<type=3D0> flags =
f<pol=3D3=3DAct Lo,trig=3D3=3DLevel>)=0A=
ioapic2: pin 1 attached to pci4 device 1 INT_A (type 0<type=3D0> flags =
f<pol=3D3=3DAct Lo,trig=3D3=3DLevel>)=0A=
ioapic2: pin 2 attached to pci4 device 1 INT_B (type 0<type=3D0> flags =
f<pol=3D3=3DAct Lo,trig=3D3=3DLevel>)=0A=
ioapic2: pin 3 attached to pci4 device 1 INT_C (type 0<type=3D0> flags =
f<pol=3D3=3DAct Lo,trig=3D3=3DLevel>)=0A=
ioapic2: pin 0 attached to pci4 device 1 INT_D (type 0<type=3D0> flags =
f<pol=3D3=3DAct Lo,trig=3D3=3DLevel>)=0A=
ioapic2: pin 2 attached to pci4 device 2 INT_A (type 0<type=3D0> flags =
f<pol=3D3=3DAct Lo,trig=3D3=3DLevel>)=0A=
ioapic2: pin 3 attached to pci4 device 2 INT_B (type 0<type=3D0> flags =
f<pol=3D3=3DAct Lo,trig=3D3=3DLevel>)=0A=
ioapic2: pin 0 attached to pci4 device 2 INT_C (type 0<type=3D0> flags =
f<pol=3D3=3DAct Lo,trig=3D3=3DLevel>)=0A=
ioapic2: pin 1 attached to pci4 device 2 INT_D (type 0<type=3D0> flags =
f<pol=3D3=3DAct Lo,trig=3D3=3DLevel>)=0A=
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured=0A=
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured=0A=
PNP0A03 [PCI Bus] at acpi0 not configured=0A=
PNP0000 [AT Interrupt Controller] at acpi0 not configured=0A=
PNP0200 [AT DMA Controller] at acpi0 not configured=0A=
PNP0100 [AT Timer] at acpi0 not configured=0A=
PNP0B00 [AT Real-Time Clock] at acpi0 not configured=0A=
PNP0800 [AT-style speaker sound] at acpi0 not configured=0A=
PNP0C04 [Math Coprocessor] at acpi0 not configured=0A=
PNP0501 [16550A-compatible COM port] at acpi0 not configured=0A=
PNP0501 [16550A-compatible COM port] at acpi0 not configured=0A=
PNP0700 [PC standard floppy disk controller] at acpi0 not configured=0A=
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not =
configured=0A=
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not =
configured=0A=
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not =
configured=0A=
PNP0C01 [System Board] at acpi0 not configured=0A=
PNP0A03 [PCI Bus] at acpi0 not configured=0A=
PNP0C0C [ACPI power button device] at acpi0 not configured=0A=
PNP0C0F [PCI interrupt link device] at acpi0 not configured=0A=
PNP0C0F [PCI interrupt link device] at acpi0 not configured=0A=
PNP0C0F [PCI interrupt link device] at acpi0 not configured=0A=
PNP0C0F [PCI interrupt link device] at acpi0 not configured=0A=
PNP0C0F [PCI interrupt link device] at acpi0 not configured=0A=
PNP0C0F [PCI interrupt link device] at acpi0 not configured=0A=
PNP0C0F [PCI interrupt link device] at acpi0 not configured=0A=
PNP0C0F [PCI interrupt link device] at acpi0 not configured=0A=
PNP0C0F [PCI interrupt link device] at acpi0 not configured=0A=
PNP0C0F [PCI interrupt link device] at acpi0 not configured=0A=
pci0 at mainbus0 bus 0: configuration mode 1=0A=
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok=0A=
pchb0 at pci0 dev 0 function 0=0A=
pchb0: Nvidia nForce3 250 Host-PCI bridge (rev. 0xa1)=0A=
pcib0 at pci0 dev 1 function 0=0A=
pcib0: Nvidia nForce3 250 PCI-ISA bridge (rev. 0xa2)=0A=
Nvidia nForce3 250 SMBus Controller (SMBus serial bus, revision 0xa1) at =
pci0 dev 1 function 1 not configured=0A=
ohci0 at pci0 dev 2 function 0: Nvidia nForce3 250 USB Host Controller =
(rev. 0xa1)=0A=
ohci0: interrupting at ioapic0 pin 11 (irq 11)=0A=
ohci0: OHCI version 1.0, legacy support=0A=
ohci0: SMM does not respond, resetting=0A=
usb0 at ohci0: USB revision 1.0=0A=
uhub0 at usb0=0A=
uhub0: Nvidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub0: 4 ports with 4 removable, self powered=0A=
ohci1 at pci0 dev 2 function 1: Nvidia nForce3 250 USB Host Controller =
(rev. 0xa1)=0A=
ohci1: interrupting at ioapic0 pin 7 (irq 7)=0A=
ohci1: OHCI version 1.0, legacy support=0A=
usb1 at ohci1: USB revision 1.0=0A=
uhub1 at usb1=0A=
uhub1: Nvidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub1: 4 ports with 4 removable, self powered=0A=
Nvidia nForce3 250 USB2 Host Controller (USB serial bus, interface 0x20, =
revision 0xa2) at pci0 dev 2 function 2 not con
figured=0A=
Nvidia product 0x00e6 (ethernet network, revision 0xa2) at pci0 dev 5 =
function 0 not configured=0A=
auich0 at pci0 dev 6 function 0: nForce3 250 MCP-T AC-97 Audio=0A=
auich0: interrupting at ioapic0 pin 10 (irq 10)=0A=
auich0: ac97: Avance Logic ALC655 codec; no 3D stereo=0A=
auich0: ac97: ext id 9c4<AC97_23,LDAC,SDAC,CDAC,SPDIF>=0A=
viaide0 at pci0 dev 8 function 0=0A=
viaide0: NVIDIA nForce3 250 IDE Controller (rev. 0xa2)=0A=
viaide0: bus-master DMA support present=0A=
viaide0: primary channel configured to compatibility mode=0A=
viaide0: primary channel interrupting at ioapic0 pin 14 (irq 14)=0A=
atabus0 at viaide0 channel 0=0A=
viaide0: secondary channel configured to compatibility mode=0A=
viaide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)=0A=
atabus1 at viaide0 channel 1=0A=
ppb0 at pci0 dev 11 function 0: Nvidia nForce3 250 AGP (rev. 0xa2)=0A=
pci1 at ppb0 bus 2=0A=
pci1: i/o space, memory space enabled=0A=
vga0 at pci1 dev 0 function 0: Nvidia GeForce4 Ti 4600 (rev. 0xa3)=0A=
wsdisplay0 at vga0 kbdmux 1=0A=
wsmux1: connecting to wsdisplay0=0A=
ppb1 at pci0 dev 14 function 0: Nvidia nForce3 250 PCI-PCI bridge (rev. =
0xa2)=0A=
pci2 at ppb1 bus 1=0A=
pci2: i/o space, memory space enabled=0A=
Texas Instruments TSB43AA22/A IEEE 1394 Host Controller (Firewire serial =
bus, interface 0x10) at pci2 dev 6 function 0 n
ot configured=0A=
rtk0 at pci2 dev 7 function 0: Realtek 8139 10/100BaseTX=0A=
rtk0: interrupting at ioapic0 pin 11 (irq 11)=0A=
rtk0: Ethernet address 00:05:1c:11:b2:f2=0A=
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface=0A=
ukphy0: OUI 0x000000, model 0x0000, rev. 0=0A=
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto=0A=
Nvidia product 0x00ec (miscellaneous communications, revision 0xa1) at =
pci0 dev 23 function 0 not configured=0A=
pchb1 at pci0 dev 24 function 0=0A=
pchb1: Advanced Micro Devices AMD64 HyperTransport configuration (rev. =
0x00)=0A=
pchb2 at pci0 dev 24 function 1=0A=
pchb2: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)=0A=
pchb3 at pci0 dev 24 function 2=0A=
pchb3: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)=0A=
pchb4 at pci0 dev 24 function 3=0A=
pchb4: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. =
0x00)=0A=
pchb5 at pci0 dev 25 function 0=0A=
pchb5: Advanced Micro Devices AMD64 HyperTransport configuration (rev. =
0x00)=0A=
pchb6 at pci0 dev 25 function 1=0A=
pchb6: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)=0A=
pchb7 at pci0 dev 25 function 2=0A=
pchb7: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)=0A=
pchb8 at pci0 dev 25 function 3=0A=
pchb8: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. =
0x00)=0A=
isa0 at pcib0=0A=
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo=0A=
com0: console=0A=
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo=0A=
pckbc0 at isa0 port 0x60-0x64=0A=
pckbdprobe: reset error 5=0A=
pmsprobe: reset error 5=0A=
pcppi0 at isa0 port 0x61=0A=
midi0 at pcppi0: PC speaker=0A=
sysbeep0 at pcppi0=0A=
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2=0A=
pci3 at mainbus0 bus 4=0A=
pci3: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok=0A=
pci4 at mainbus0 bus 5=0A=
pci4: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok=0A=
ahc0 at pci4 dev 1 function 0: Adaptec 3960D Ultra160 SCSI adapter=0A=
ahc0: interrupting at ioapic1 pin 1 (irq 9)=0A=
ahc0: aic7899: Ultra160 Wide Channel A, SCSI Id=3D7, 32/253 SCBs=0A=
scsibus0 at ahc0: 16 targets, 8 luns per target=0A=
ahc1 at pci4 dev 1 function 1: Adaptec 3960D Ultra160 SCSI adapter=0A=
ahc1: interrupting at ioapic1 pin 2 (irq 11)=0A=
ahc1: aic7899: Ultra160 Wide Channel B, SCSI Id=3D7, 32/253 SCBs=0A=
scsibus1 at ahc1: 16 targets, 8 luns per target=0A=
ppb2 at pci4 dev 2 function 0: Digital Equipment DC21154 PCI-PCI Bridge =
(rev. 0x05)=0A=
pci5 at ppb2 bus 6=0A=
pci5: i/o space, memory space enabled=0A=
ppb3 at pci5 dev 0 function 0: Digital Equipment DC21154 PCI-PCI Bridge =
(rev. 0x05)=0A=
pci6 at ppb3 bus 7=0A=
pci6: memory space enabled=0A=
American Megatrends MegaRAID 3 (RAID mass storage, revision 0x02) at =
pci6 dev 0 function 0 not configured=0A=
isp0 at pci5 dev 1 function 0: QLogic Dual Channel Ultra-3 Wide SCSI HBA=0A=
isp0: interrupting at ioapic1 pin 3 (irq 11)=0A=
isp0: Polled Mailbox Command (0x8) Timeout=0A=
isp0: interrupt (ISR=3D4 SEMA=3D0) when not ready=0A=
isp0: interrupt (ISR=3D4 SEMA=3D0) when not ready=0A=
isp0: Polled Mailbox Command (0x35) Timeout=0A=
isp0: failed to set active negation state (1,1), (1,1)=0A=
isp0: Polled Mailbox Command (0x33) Timeout=0A=
isp0: failed to set tag age limit (8,8)=0A=
cpu0: prelint0 700<vector=3D0,delmode=3D7,dest=3D0> 0<target=3D0>=0A=
cpu0: prelint1 400<vector=3D0,delmode=3D4,dest=3D0> 0<target=3D0>=0A=
cpu0: timer0 300c0<vector=3Dc0,delmode=3D0,masked,dest=3D0> 0<target=3D0>=0A=
cpu0: pcint0 10000<vector=3D0,delmode=3D0,masked,dest=3D0> 0<target=3D0>=0A=
cpu0: lint0 10700<vector=3D0,delmode=3D7,masked,dest=3D0> 0<target=3D0>=0A=
cpu0: lint1 400<vector=3D0,delmode=3D4,dest=3D0> 0<target=3D0>=0A=
cpu0: err0 1000f<vector=3Df,delmode=3D0,masked,dest=3D0> 0<target=3D0>=0A=
ioapic0: enabling=0A=
ioapic0: int3 d1<vector=3Dd1,delmode=3D0,dest=3D0> 0<target=3D0>=0A=
ioapic0: int4 d0<vector=3Dd0,delmode=3D0,dest=3D0> 0<target=3D0>=0A=
ioapic0: int6 64<vector=3D64,delmode=3D0,dest=3D0> 0<target=3D0>=0A=
ioapic0: int7 =
e061<vector=3D61,delmode=3D0,actlo,irrpending,level,dest=3D0> =
0<target=3D0>=0A=
ioapic0: int9 80a0<vector=3Da0,delmode=3D0,level,dest=3D0> 0<target=3D0>=0A=
ioapic0: int10 a0b0<vector=3Db0,delmode=3D0,actlo,level,dest=3D0> =
0<target=3D0>=0A=
ioapic0: int11 =
e060<vector=3D60,delmode=3D0,actlo,irrpending,level,dest=3D0> =
0<target=3D0>=0A=
ioapic0: int14 62<vector=3D62,delmode=3D0,dest=3D0> 0<target=3D0>=0A=
ioapic0: int15 63<vector=3D63,delmode=3D0,dest=3D0> 0<target=3D0>=0A=
ioapic1: enabling=0A=
ioapic1: int1 a065<vector=3D65,delmode=3D0,actlo,level,dest=3D0> =
0<target=3D0>=0A=
ioapic1: int2 a066<vector=3D66,delmode=3D0,actlo,level,dest=3D0> =
0<target=3D0>=0A=
ioapic1: int3 a067<vector=3D67,delmode=3D0,actlo,level,dest=3D0> =
0<target=3D0>=0A=
ioapic2: enabling=0A=
audio0 at auich0: full duplex, independent=0A=
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec=0A=
raidattach: Asked for 8 units=0A=
Kernelized RAIDframe activated=0A=
scsibus0: waiting 2 seconds for devices to settle...=0A=
scsibus1: waiting 2 seconds for devices to settle...=0A=
wd0 at atabus0 drive 0: <ST32122A>=0A=
wd0: drive supports 16-sector PIO transfers, LBA addressing=0A=
wd0: 2014 MB, 4092 cyl, 16 head, 63 sec, 512 bytes/sect x 4124736 sectors=0A=
wd0: 32-bit data port=0A=
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)=0A=
wd1 at atabus0 drive 1: <Conner Peripherals 1080MB - CFS1081A>=0A=
wd1: drive supports 16-sector PIO transfers, LBA addressing=0A=
wd1: 1032 MB, 2097 cyl, 16 head, 63 sec, 512 bytes/sect x 2114180 sectors=0A=
wd1: 32-bit data port=0A=
wd1: drive supports PIO mode 4, DMA mode 2=0A=
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using =
DMA)=0A=
wd1(viaide0:0:1): using PIO mode 4, DMA mode 2 (using DMA)=0A=
wd2 at atabus1 drive 0: <ST38420A>=0A=
wd2: drive supports 16-sector PIO transfers, LBA addressing=0A=
wd2: 8223 MB, 16708 cyl, 16 head, 63 sec, 512 bytes/sect x 16841664 =
sectors=0A=
wd2: 32-bit data port=0A=
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)=0A=
wd3 at atabus1 drive 1: <ST320420A>=0A=
wd3: drive supports 16-sector PIO transfers, LBA addressing=0A=
wd3: 19458 MB, 39535 cyl, 16 head, 63 sec, 512 bytes/sect x 39851760 =
sectors=0A=
wd3: 32-bit data port=0A=
wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)=0A=
wd2(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using =
DMA)=0A=
wd3(viaide0:1:1): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using =
DMA)=0A=
uhidev0 at uhub0 port 1 configuration 1 interface 0umass0 at uhub1 port =
1 configuration 1 interface 0=0A=
uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/18.00, addr 2, iclass =
3/1=0A=

umass0: OnSpec Mass Storage Card Reader, rev 1.10/1.29, addr 2=0A=
umass0: using SCSI over Bulk-Only=0A=
ums0 at uhidev0: 6 buttons and Z dir.=0A=
wsmouse0 at ums0 mux 0=0A=
scsibus2 at umass0: 2 targets, 1 lun per target=0A=
uhidev1 at uhub0 port 2 configuration 1 interface 0=0A=
uhidev1: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass =
3/1=0A=
ukbd0 at uhidev1: 8 modifier keys, 6 key codes=0A=
uhidev2 at uhub1 port 4 configuration 1 interface 0=0A=
uhidev2: SAITEK CYBORG 3D USB, rev 1.00/0.01, addr 3, iclass 3/0=0A=
uhid0 at uhidev2: input=3D7, output=3D0, feature=3D0=0A=
cd0 at scsibus0 target 4 lun 0: <PIONEER, DVD-ROM DVD-305, 1.05> cdrom =
removable=0A=
cd0: sync (50.00ns offset 16), 8-bit (20.000MB/s) transfers=0A=
wskbd0 at ukbd0 mux 1=0A=
wskbd0: connecting to wsdisplay0=0A=
uhidev3 at uhub0 port 2 configuration 1 interface 1=0A=
uhidev3: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass =
3/0=0A=
uhidev3: 3 report ids=0A=
uhid1 at uhidev3 reportid 1: input=3D2, output=3D0, feature=3D0=0A=
uhid2 at uhidev3 reportid 2: input=3D1, output=3D0, feature=3D0=0A=
ums1 at uhidev3 reportid 3: 0 buttons and Z dir.=0A=
wsmouse1 at ums1 mux 0=0A=
ugen0 at uhub0 port 4=0A=
ugen0: Midiman product 0x1010, rev 1.00/0.01, addr 4=0A=
sd0 at scsibus1 target 6 lun 0: <MAXTOR, ATLAS15K_18WLS, DT60> disk fixed=0A=
sd0: 17523 MB, 32386 cyl, 2 head, 554 sec, 512 bytes/sect x 35888130 =
sectors=0A=
sd0: sync (12.50ns offset 127), 16-bit (160.000MB/s) transfers, tagged =
queueing=0A=
sd1 at scsibus2 target 0 lun 0: <USB Mass, FlashCardReader, > disk =
removable=0A=
sd1: fabricating a geometry=0A=
sd1: 16000 KB, 15 cyl, 64 head, 32 sec, 512 bytes/sect x 32000 sectors=0A=
Searching for RAID components...=0A=
sd1: fabricating a geometry=0A=
sd1: fabricating a geometry=0A=
sd1: fabricating a geometry=0A=
boot device: wd0=0A=
root on wd0a dumps on wd0b=0A=
mountroot: trying coda...=0A=
mountroot: trying msdos...=0A=
mountroot: trying cd9660...=0A=
mountroot: trying ntfs...=0A=
mountroot: trying nfs...=0A=
mountroot: trying lfs...=0A=
mountroot: trying ext2fs...=0A=
mountroot: trying ffs...=0A=
root file system type: ffs=0A=
clock: unknown CMOS layout=0A=
cpu1: prelint0 10000<vector=3D0,delmode=3D0,masked,dest=3D0> =
0<target=3D0>=0A=
cpu1: prelint1 10000<vector=3D0,delmode=3D0,masked,dest=3D0> =
0<target=3D0>=0A=
cpu1: timer0 200c0<vector=3Dc0,delmode=3D0,dest=3D0> 0<target=3D0>=0A=
cpu1: pcint0 10000<vector=3D0,delmode=3D0,masked,dest=3D0> 0<target=3D0>=0A=
cpu1: lint0 10000<vector=3D0,delmode=3D0,masked,dest=3D0> 0<target=3D0>=0A=
cpu1: lint1 10000<vector=3D0,delmode=3D0,masked,dest=3D0> 0<target=3D0>=0A=
cpu1: err0 10000<vector=3D0,delmode=3D0,masked,dest=3D0> 0<target=3D0>=0A=
cpu1: CPU 1 running=0A=
init: copying out path `/sbin/init' 11=0A=
=0A=

------=_NextPart_000_000E_01C5314D.E0A9BBB0--