Hi Andrew,

I have an ASUS A8V board (with VIA K8T800Pro/VT8237 chipset). It's not
exactly the one you're after, so take the dmesg output with a grain of
salt.

The only problem I had so far: A 160 GB Seagate SATA hard drive was not
recognised on this board. The very same drive runs flawlessly on an
Intel board and another Seagate SATA hard drive with 80 GB runs on this
A8V board without any problems. (So does a 120 GB Western Digital SATA.)


Cheers,
Joerg



NetBSD 4.0_BETA (GENERIC.MP) #0: Sat Sep 30 04:11:37 UTC 2006
        builds@b1.netbsd.org:/home/builds/ab/netbsd-4/amd64/200609300000Z-obj/home/builds/ab/netbsd-4/src/sys/arch/amd64/compile/GENERIC.MP
total memory = 1023 MB
avail memory = 974 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
timecounter: selected timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.1) (ASUSTeK              )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, 2002.69 MHz
cpu0: features: f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features: f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 512 KB 64B/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: AMD Power Management features: TS FID VID TTP
cpu0: AMD Cool`n'Quiet Technology 2000 MHz
cpu0: available frequencies (Mhz): 1000 1800 2000
cpu0: calibrating local timer
cpu0: apic clock running at 200 MHz
cpu0: 8 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, 2002.56 MHz
cpu1: features: f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features: f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu1: features: f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
cpu1: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu1: L2 cache 512 KB 64B/line 16-way
cpu1: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu1: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu1: AMD Power Management features: TS FID VID TTP
cpu0: AMD Cool`n'Quiet Technology 2000 MHz
cpu0: available frequencies (Mhz): 1000 1800 2000
mpbios: bus 0 is type PCI   
mpbios: bus 1 is type PCI   
mpbios: bus 2 is type ISA   
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 3, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies product 0x0282 (rev. 0x00)
pchb1 at pci0 dev 0 function 1
pchb1: VIA Technologies product 0x1282 (rev. 0x00)
pchb2 at pci0 dev 0 function 2
pchb2: VIA Technologies product 0x2282 (rev. 0x00)
pchb3 at pci0 dev 0 function 3
pchb3: VIA Technologies product 0x3282 (rev. 0x00)
pchb4 at pci0 dev 0 function 4
pchb4: VIA Technologies product 0x4282 (rev. 0x00)
pchb5 at pci0 dev 0 function 7
pchb5: VIA Technologies product 0x7282 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: VIA Technologies product 0xb188 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: ATI Technologies Radeon 9200PRO 5960 (rev. 0x01)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ATI Technologies Radeon 9200 Pro Secondary (miscellaneous display, revision 0x01) at pci1 dev 0 function 1 not configured
fxp0 at pci0 dev 13 function 0: i82550 Ethernet, rev 12
fxp0: interrupting at ioapic0 pin 18 (irq 5)
fxp0: Ethernet address 00:02:b3:bc:19:13
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1 at pci0 dev 14 function 0: i82550 Ethernet, rev 12
fxp1: interrupting at ioapic0 pin 19 (irq 3)
fxp1: Ethernet address 00:02:b3:bc:1b:45
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
viaide0 at pci0 dev 15 function 0
viaide0: VIA Technologies VT8237 SATA Controller (rev. 0x80)
viaide0: bus-master DMA support present
viaide0: primary channel wired to native-PCI mode
viaide0: using ioapic0 pin 20 (irq 10) for native-PCI interrupt
atabus0 at viaide0 channel 0
viaide0: secondary channel wired to native-PCI mode
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 15 function 1
viaide1: VIA Technologies VT8237 ATA133 controller
viaide1: bus-master DMA support present
viaide1: primary channel configured to compatibility mode
viaide1: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus2 at viaide1 channel 0
viaide1: secondary channel configured to compatibility mode
viaide1: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus3 at viaide1 channel 1
uhci0 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB Controller (rev. 0x81)
uhci0: interrupting at ioapic0 pin 21 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB Controller (rev. 0x81)
uhci1: interrupting at ioapic0 pin 21 (irq 11)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x81)
uhci2: interrupting at ioapic0 pin 21 (irq 10)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3: VIA Technologies VT83C572 USB Controller (rev. 0x81)
uhci3: interrupting at ioapic0 pin 21 (irq 10)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 4: VIA Technologies VT8237 EHCI USB Controller (rev. 0x86)
ehci0: interrupting at ioapic0 pin 21 (irq 5)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: VIA Technologies EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib0 at pci0 dev 17 function 0
pcib0: VIA Technologies VT8237 (Apollo KT600) PCI-ISA Bridge (rev. 0x00)
auvia0 at pci0 dev 17 function 5: VIA Technologies VT8237 AC'97 Audio (rev 0x60)
auvia0: interrupting at ioapic0 pin 22 (irq 5)
auvia0: ac97: Avance Logic ALC850 codec; no 3D stereo
auvia0: ac97: ext id 9c6<AC97_23,LDAC,SDAC,CDAC,SPDIF,DRA>
audio0 at auvia0: full duplex, independent
pchb6 at pci0 dev 24 function 0
pchb6: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb7 at pci0 dev 24 function 1
pchb7: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb8 at pci0 dev 24 function 2
pchb8: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb9 at pci0 dev 24 function 3
pchb9: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
pcppi0: attached to attimer0
ioapic0: enabling
timecounter: Timecounter "TSC" frequency 2002743810 Hz quality 800
timecounter: selected timecounter "TSC" frequency 2002743810 Hz quality 800
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <WDC WD1200JD-22HBB0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus1 drive 0: <ST380817AS>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus2: 2 targets
cd0 at atapibus0 drive 0: <SAMSUNG CD-R/RW DRIVE SW-252F, , R802> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd1
root on wd1a dumps on wd1b
root file system type: ffs
cpu1: CPU 1 running
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)