This is a continuation of a thread I started on port-i386:

   http://mail-index.netbsd.org/port-i386/2007/07/05/0001.html

actually mostly a duplication of its last message...


For reference, I thought I'd report the result of installing 
port-amd64 (built from sources CVS-updated on 21 June 2007) on a Dell 
OptiPlex 745.

It booted the INSTALL kernel and ran sysinst OK--but I had to use a 
PS/2 keyboard because the USB one didn't work.  The NIC didn't work 
with the install kernel either.

I'll append dmesg's output for the GENERIC.MP kernel to this message. 
The NIC didn't work with it either--although it did identify it 
during probing as a Broadcom BCM5754.  As expected, it did recognise 
basically all the PC's 4 GB of RAM, while the i386 kernel said:

total memory = 3069 MB
avail memory = 3005 MB

I did have to turn off the USB controller in the BIOS before it would 
go as far as giving a login: prompt with the GENERIC.MP kernel. 
Before I did that it would stop when probing the hardware with this 
line:

uhub2: device problem, disabling port 1


Ray



Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
     2006, 2007
     The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.

NetBSD 4.99.20 (GENERIC.MP) #0: Thu Jul  5 13:21:09 EST 2007
         ray@jb.jkmrc.uq.edu.au:/usr/obj/sys/arch/amd64/compile/GENERIC.MP
total memory = 4029 MB
avail memory = 3876 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
cpu0 at mainbus0 apid 0: (boot processor)
cpu0: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz, 2394.12 MHz
cpu0: features: bffbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: bffbfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,B20,DS,ACPI,MMX>
cpu0: features: bffbfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2: e3bd<SSE3,MONITOR,DS-CPL,VMX,EST,TM2,xTPR,PDCM>
cpu0: features3: bffbfbff<SYSCALL/SYSRET,XD,EM64T>
cpu0: L2 cache 4 MB 64B/line 16-way
cpu0: calibrating local timer
cpu0: apic clock running at 266 MHz
cpu0: 64 page colors
cpu1 at mainbus0 apid 1: (application processor)
cpu1: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz, 2394.00 MHz
cpu1: features: bffbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features: bffbfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,B20,DS,ACPI,MMX>
cpu1: features: bffbfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu1: features2: e3bd<SSE3,MONITOR,DS-CPL,VMX,EST,TM2,xTPR,PDCM>
cpu1: features3: bffbfbff<SYSCALL/SYSRET,XD,EM64T>
cpu1: L2 cache 4 MB 64B/line 16-way
ioapic0 at mainbus0 apid 8
ioapic0: pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 8
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <DELL  , B8K    ,00000014>, AslId <ASL ,00000061>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
mpacpi: could not get bus number, assuming bus 0
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0C0C [ACPI power button device] at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
PNP0C04 [Math Coprocessor] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0800 [AT-style speaker sound] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
PNP0100 [AT Timer] at acpi0 not configured
PNP0700 [PC standard floppy disk controller] at acpi0 not configured
PNP0303 [IBM Enhanced (101/102-key, PS/2 mouse support)] at acpi0 not 
configured
PNP0401 [ECP printer port] at acpi0 not configured
PNP0501 [16550A-compatible COM port] at acpi0 not configured
PNP0501 [16550A-compatible COM port] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0103 [HPET Timer] at acpi0 not configured
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82965Q Host Bridge (rev. 0x02)
ppb0 at pci0 dev 1 function 0: Intel 82965Q PCI Express Bridge (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci1 dev 0 function 0: ATI Technologies product 0x7183 (rev. 0x00)
vga0: WARNING: ignoring 64-bit BAR @ 0x10
vga0: WARNING: ignoring 64-bit BAR @ 0x18
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
direct rendering for vga0 unsupported
ATI Technologies product 0x71a3 (miscellaneous display) at pci1 dev 0 
function 1 not configured
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 16 (irq 11)
azalia0: host: Intel 82801H High Definition Audio Controller (rev. 2)
azalia0: host: High Definition Audio rev. 1.0
ppb1 at pci0 dev 28 function 0: Intel 82801H PCI Express Port #1 (rev. 0x02)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 4: Intel 82801H PCI Express Port #5 (rev. 0x02)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
Broadcom BCM5754 10/100/1000 Ethernet (ethernet network, revision 
0x02) at pci3 dev 0 function 0 not configured
ppb3 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xf2)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801H LPC Interface Bridge (rev. 0x02)
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801H Serial ATA Controller (ICH8) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to native-PCI mode
piixide0: using ioapic0 pin 20 (irq 10) for native-PCI interrupt
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to native-PCI mode
atabus1 at piixide0 channel 1
Intel 82801H SMBus Controller (SMBus serial bus, revision 0x02) at 
pci0 dev 31 function 3 not configured
piixide1 at pci0 dev 31 function 5
piixide1: Intel 82801H Serial ATA Controller (ICH8) (rev. 0x02)
piixide1: bus-master DMA support present
piixide1: primary channel wired to native-PCI mode
piixide1: using ioapic0 pin 20 (irq 10) for native-PCI interrupt
atabus2 at piixide1 channel 0
piixide1: secondary channel wired to native-PCI mode
atabus3 at piixide1 channel 1
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcppi0: attached to attimer0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: codec[0]: Analog Devices AD1983 (rev. 4.0)
azalia0: codec[0]: High Definition Audio rev. 1.0
azalia0: playback: max channels=2, encodings=1<PCM>
azalia0: playback: PCM 
formats=e007f<24bit,20bit,16bit,48kHz,44.1kHz,32kHz,22.05kHz,16kHz,11.025kHz,8kHz>
azalia0: recording: max channels=2, encodings=1<PCM>
azalia0: recording: PCM 
formats=e007f<24bit,20bit,16bit,48kHz,44.1kHz,32kHz,22.05kHz,16kHz,11.025kHz,8kHz>
audio0 at azalia0: full duplex, independent
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <ST3160812AS>
wd0: quirks 2<FORCE_LBA48>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310019 cyl, 16 head, 63 sec, 512 bytes/sect x 312500000 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <TSSTcorp CD-RW/DVD-ROM TS-H493A, , D200> 
cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)