Port-amd64 archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: missing driver problem
Hi,
Thanks for pursuing this. I downloaded an ISO image of 6.1.4, and
installed from DVD. I can see the same "not configured" messages in
the hardware probe phase of the initial load from DVD. Is it
possible that the standard 6.1.4 kernel is somehow configured
differently?
--
Steve Blinkhorn <steve%prd.co.uk@localhost>
You wrote:
>
> Hi.
>
> On 2014/07/30 23:05, Steve Blinkhorn wrote:
> > Thanks for the quick response. I can't easily get the whole of
> > /var/run/dmesg.boot to you for lack of a network connection, but here
> > is a manual transcript of the relevant line for the Ethernet adapter:
> >
> > vendor 0x8086 product 0x153b (ethernet network revision 0x04) at pci dev 25
> > function 0 not configured
>
> This is I217V
>
> From pcidevs:
> > product INTEL I217_V 0x153b I217-V Ethernet Connection
>
> From if_wm.c
> > { PCI_VENDOR_INTEL, PCI_PRODUCT_INTEL_I217_V,
> > "I217 V Ethernet Connection",
>
> The entry exists in both -current and netbsd-6...
>
>
>
>
> > --
> > Steve Blinkhorn <steve%prd.co.uk@localhost>
> >
> > You wrote:
> >>
> >> On 2014/07/30 3:28, Steve Blinkhorn wrote:
> >>> I have just installed the first of what is intended to be a clutch of
> >>> several amd64 systems on an Intel core i5 based Fujitsu micro PC - the
> >>> sort with everything soldered in and looks like a doorstop paperback.
> >>> The installation is multiboot with (pre-installed) Windows 8.1.
> >>>
> >>> I have some (possibly related) problems.
> >>>
> >>> 1. If I boot normally, the keyboard does not function, but if I boot
> >>> single user and then Ctrl-D it does.
> >>>
> >>> 2. However I get hardware probe messages every few seconds saying that
> >>> a handful of devices related to a USB hub have disconnected.
> >>>
> >>> 3. Various devices just do not work, presumably for lack of suitable
> >>> drivers. These are all Intel, and include both the Ethernet 1217V
> >>> and Wireless Centrino N-2230 network adapters, as well as the USB 3.0
> >>> hub and a handful of others.
> >>>
> >>> I have seen the correspondence in the NetBSD-users archive a couple of
> >>> years back, which didn't seem to come to any very definite conclusion.
> >>> I'm a long-term NetBSD user, but driver development is just out of my
> >>> league. Have I wasted my money on this kit? I've never had the
> >>> experience of commodity hardware failing to find suitable drivers
> >>> before, and these machines are scarcely leading-edge experimental.
> >>> Of course, there may be drivers that just aren't configured in the
> >>> GENERIC kernel, but without a network connection to download the
> >>> sources I'm not in a good position to find out.
> >>
> >> For Intel I217V, -current and netbsd-6 branch support the device.
> >> I have been using a motherboard which has I217LM on-board for a
> >> year.
> >>
> >>> wm1 at pci0 dev 25 function 0: I217 LM Ethernet Connection (rev. 0x04)
> >>> wm1: interrupting at ioapic0 pin 20
> >>> wm1: PCI-Express bus
> >>> wm1: FLASH
> >>> wm1: Ethernet address 70:54:d2:xx:xx:xx
> >>
> >> If the device doesn't work on your machine, please show me the dmesg.
> >>
> >>
> >>
> >> Thanks.
> >>
> >> --
> >> -----------------------------------------------
>
>
> --
> -----------------------------------------------
> SAITOH Masanobu (msaitoh%execsw.org@localhost
> msaitoh%netbsd.org@localhost)
>
--
Steve Blinkhorn <steve%prd.co.uk@localhost>
****************************************************************************
This email is for the addressee only. If you are not the addressee
you should immediately delete this email from your system(s) and
inform us. It may contain information that is confidential or
otherwise privileged, and should not be copied or redistributed to
recipients not originally specified as addressees without permission.
S F Blinkhorn MA PhD CPsychol FBPsS, Managing Director,
Psychometric Research & Development Ltd.
PO Box 1143, St Albans, Herts, AL1 9UT, UK
Registered in England No. 1909571
Registered Office: 45 Grosvenor Rd., St Albans, Herts, AL1 3AW
Phone: +44 (0)1727 841455
http://www.prd.co.uk
****************************************************************************
Home |
Main Index |
Thread Index |
Old Index