NetBSD 5.0.2 on the Qemu MIPS MAGNUM

[Jason Stevens <neozeed%gmail.com@localhost>]

Well I was able to get 5.0.2 to boot up using pretty much the same method as 1.5.2

Again this is using Qemu 0.12.3

Here is the dmesg for anyone that is interested....

jazz: display controller [Mips G364] is not configured

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,

    2006, 2007, 2008, 2009

    The NetBSD Foundation, Inc.  All rights reserved.

Copyright (c) 1982, 1986, 1989, 1991, 1993

    The Regents of the University of California.  All rights reserved.

NetBSD 5.0.2 (GENERIC) #0: Sat Feb  6 13:57:05 UTC 2010

        builds%b7.netbsd.org@localhost:/home/builds/ab/netbsd-5-0-2-RELEASE/arc/2010020618

51Z-obj/home/builds/ab/netbsd-5-0-2-RELEASE/src/sys/arch/arc/compile/GENERIC

MIPS Magnum

total memory = 65536 KB

avail memory = 56772 KB

timecounter: Timecounters tick every 10.000 msec

mainbus0 (root)

cpu0 at mainbus0: MIPS R4000 CPU (0x400) Rev. 0.0 with software emulated floating point

cpu0: 8KB/16B direct-mapped L1 Instruction cache, 48 TLB entries

cpu0: 8KB/16B direct-mapped write-back L1 Data cache

jazzio0 at mainbus0

timer0 at jazzio0 addr 0xe0000228

mcclock0 at jazzio0 addr 0xe0004000: mc146818 compatible time-of-day clock

lpt0 at jazzio0 addr 0xe0008000 intr 0

fdc0 at jazzio0 addr 0xe0003000 intr 1

fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec

fd1 at fdc0 drive 1: 1.44MB, 80 cyl, 2 head, 18 sec

MAGNUM at jazzio0 addr 0xe000c000 intr 2 not configured

VXL at jazzio0 addr 0xe0800000 intr 3 not configured

sn0 at jazzio0 addr 0xe0001000 intr 4: SONIC Ethernet

sn0: Ethernet address 00:00:00:00:00:00

asc0 at jazzio0 addr 0xe0002000 intr 5: NCR53C94, 25MHz, SCSI ID 7

scsibus0 at asc0: 8 targets, 8 luns per target

kbc selftest: 38

I8742 at jazzio0 addr 0xe0005000 intr 6 not configured

pms at jazzio0 addr 0xe0005000 intr 7 not configured

com0 at jazzio0 addr 0xe0006000 intr 8: ns16550a, working fifo

com0: txfifo disabled

com0: console

COM2 at jazzio0 addr 0xe0007000 intr 9 not configured

jazzisabr0 at mainbus0

isa0 at jazzisabr0 isa_io_base 0xe2000000 isa_mem_base 0xe3000000

isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support

isapnp0: no ISA Plug 'n Play devices found

timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0

timecounter: Timecounter "mips3_cp0_counter" frequency 75000000 Hz quality 100

scsibus0: waiting 2 seconds for devices to settle...

sd0 at scsibus0 target 0 lun 0: <QEMU, QEMU HARDDISK, 0.12> disk fixed

sd0: fabricating a geometry

sd0: 2048 MB, 2048 cyl, 64 head, 32 sec, 512 bytes/sect x 4194304 sectors

sd1 at scsibus0 target 1 lun 0: <QEMU, QEMU HARDDISK, 0.12> disk fixed

sd1: fabricating a geometry

sd1: 3665 KB, 3 cyl, 64 head, 32 sec, 512 bytes/sect x 7331 sectors

cd0 at scsibus0 target 2 lun 0: <QEMU, QEMU CD-ROM, 0.12> cdrom removable

Kernelized RAIDframe activated

boot device: sd0

root device (default sd0a):

dump device (default sd0b):

file system (default generic):

root on sd0a dumps on sd0b

sd0(asc0:0:0:0): asc0: timed out [ecb 0x83f1af88 (flags 0x1, dleft 8, stat 0)],

<state 5, nexus 0x83f1af88, phase(l 2, c 2, p 2), resid 8, msg(q 0,o 0) >

sd0(asc0:0:0:0): asc0: timed out [ecb 0x83f1af88 (flags 0x41, dleft 8, stat 0)],

 <state 5, nexus 0x83f1af88, phase(l 2, c 2, p 2), resid 8, msg(q 20,o 0) > AGAIN

sd0: async, 8-bit transfers

sd1: async, 8-bit transfers

cd0: async, 8-bit transfers

sd0: fabricating a geometry

root file system type: ffs

WARNING: preposterous TOD clock time

WARNING: using filesystem time

WARNING: CHECK AND RESET THE DATE!

init path (default /sbin/init):

init: trying /sbin/init