Okay... The port is far enough along, that I feel like I can post a little
teaser.

RedBoot(tm) debug environment - built 17:16:14, Feb 12 2001
Platform: IQ80310 (XScale) 
Copyright (C) 2000, Red Hat, Inc.

RAM: 0xa0000000-0xa2000000
FLASH: 0x00000000 - 0x00800000, 64 blocks of 0x00020000 bytes each.
IP: 208.176.2.165, Default server: 208.176.2.166
RedBoot> load netbsd.iq
Entry point: 0xa0200000, address range: 0xa0200000-0xa038e474
RedBoot> go

NetBSD/evbarm (IQ80310) booting ...
Resetting secondary PCI bus...
initarm: Configuring system ...
physmemory: 8192 pages at 0xa0000000 -> 0xa1ffffff
init subsystems: stacks vectors undefined pmap irq done.
[ using 151768 bytes of netbsd ELF symbol table ]
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5Y (IQ80310) #3: Mon Nov 19 10:25:09 PST 2001
    thorpej@dr-evil:/u1/netbsd/src/sys/arch/evbarm/compile/IQ80310
total memory = 32768 KB
avail memory = 25492 KB
using 435 buffers containing 1740 KB of memory
mainbus0 (root)
cpu0 at mainbus0: i80200 rev 0 (XScale core) DC enabled IC enabled WB enabled LABT branch prediction enabled
obio0 at mainbus0: board rev. F, CPLD rev. D, backplane present
com0 at obio0 addr 0xfe800000: ns16550a, working fifo
com1 at obio0 addr 0xfe810000: ns16550a, working fifo
com1: console
iopxs0 at mainbus0: i80312 Companion I/O, acting as PCI host
iopxs0: configuring Secondary PCI bus
pci0 at iopxs0 bus 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
ppb0 at pci0 dev 7 function 0: Digital Equipment DECchip 21154 PCI-PCI Bridge (rev. 0x05)
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled
fxp0 at pci1 dev 0 function 0: i82559S Ethernet, rev 9
fxp0: interrupting at CPLD irq 1
fxp0: Ethernet address 00:80:4d:46:0b:b9
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
clock: hz=100 stathz=100 profhz=100
boot device: <unknown>
root device: fxp0
dump device: 
file system (default generic): 
root on fxp0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP next-server: 208.176.2.166
nfs_boot: my_name=groovy-jumbo-jet.shagadelic.org
nfs_boot: my_domain=shagadelic.org
nfs_boot: my_addr=208.176.2.165
nfs_boot: my_mask=255.255.255.240
nfs_boot: gateway=208.176.2.161
root on 208.176.2.166:/u1/diskless/iq80310
root file system type: nfs
Wed Dec 31 16:01:08 PST 1969
Starting file system checks:
Setting tty flags.
Setting sysctl variables:
Starting network.
Hostname: groovy-jumbo-jet.shagadelic.org
NIS domainname: SHAG-NET
default              208.176.2.161        done
add net 127.0.0.0: gateway 127.0.0.1
add net fe80::: gateway ::1
add net fec0::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::224.0.0.0: gateway ::1
add net ::127.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
add net ::255.0.0.0: gateway ::1
add net 2002:e000::: gateway ::1
add net 2002:7f00::: gateway ::1
add net 2002:0000::: gateway ::1
add net 2002:ff00::: gateway ::1
add net ::0.0.0.0: gateway ::1
IPv6 mode: autoconfigured host
Configuring network interfaces: fxp0.
add net default: gateway 208.176.2.161
Adding interface aliases:
Building databases...
Starting syslogd.
Checking for core dump...
savecore: can't find device 49/131872
Dec 31 16:01:16 groovy-jumbo-jet savecore: can't find device 49/131872
Setting date via ntp.
Starting rpcbind.
Starting ypbind.
Mounting all filesystems...
Clearing /tmp.
Starting virecover.
Checking quotas: done.
Setting securelevel: kern.securelevel: 0 -> 1
Starting statd.
Starting lockd.
swapctl: adding /swapfile as swap device at priority 0
Starting amd.
Starting rtsold.
Starting ntpd.
Updating motd.
starting local daemons:.
Starting sshd.
Starting inetd.
Starting cron.
Mon Nov 19 10:26:36 PST 2001

NetBSD/evbarm (groovy-jumbo-jet.shagadelic.org) (console)

login: 

-- 
        -- Jason R. Thorpe <thorpej@wasabisystems.com>