Subject: Re: change proposal sys/arch/arm/ep93xx
To: Jesse Off <joff@embeddedARM.com>
From: Jason Thorpe <thorpej@shagadelic.org>
List: port-arm
Date: 10/18/2005 12:08:00
On Oct 18, 2005, at 10:46 AM, Jesse Off wrote:

> I wrote the epe driver for the TS-7200 board.  This board has the  
> MAC set by the RedBoot firmware and IIRC, I just leave the value  
> untouched.  Just keep in mind if you overwrite the MAC using some  
> method specific to your board, it will break the TS-7200 unless you  
> make sure it happens only for your board.

There is a better way to do this using properties.  I'll follow-up  
more later.


-- thorpej