Port-arm archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
XFree86 for 4.0 has dead keys?
Hello,
I've just upgraded my shark to 4.0_STABLE from 3.1, and the new X server
seems to have some dead keys: the right Alt, Insert, Delete, Home, End,
PgUp, PgDn, PrintScreen, the / and Enter on the keypad, and all four of
the cursor keys (not the keypad cursor keys, which work fine). What is
most curious is that according to xev, pressing these keys doesn't even
generate an X event.
My keyboard is a regular PC104 keyboard (a DEC PCXAL-AA, if anyone cares).
I've appended my dmesg and XF86Config files after my signature.
I don't miss most of them, but the missing cursor keys are particularly
irritating. Is there something I can do to make them reappear? If not,
where should I look to start investigating?
Thanks,
Konrad Schroder
perseant%hhhh.org@localhost
---- /var/run/dmesg.boot ----
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 4.0_STABLE (GENERIC) #0: Fri Feb 8 15:22:33 PST 2008
perseant%wetbar.hitl.washington.edu@localhost:/alt/src-4/sys/arch/shark/compile/obj.shark/GENERIC
total memory = 65536 KB
avail memory = 59824 KB
timecounter: Timecounters tick every 15.625 msec
mainbus0 (root)
cpu0 at mainbus0: SA-110 step S (SA-1 core)
cpu0: DC enabled IC enabled WB enabled EABT
cpu0: 16KB/32B 32-way Instruction cache
cpu0: 16KB/32B 32-way write-back Data cache
ofbus0 (root)
ofbus1 at ofbus0 (packages)
client-services at ofbus1 not configured
terminal-emulator at ofbus1 not configured
stringio at ofbus1 not configured
deblocker at ofbus1 not configured
obp-tftp at ofbus1 not configured
ufs-file-system at ofbus1 not configured
fat-file-system at ofbus1 not configured
iso9660-file-system at ofbus1 not configured
disk-label at ofbus1 not configured
dropin-file-system at ofbus1 not configured
sound.wav at ofbus1 not configured
nfs at ofbus1 not configured
chosen at ofbus0 not configured
openprom at ofbus0 not configured
options at ofbus0 not configured
aliases at ofbus0 not configured
memory@f000000 at ofbus0 not configured
mmu at ofbus0 not configured
ofbus2 at ofbus0 (vlbus)
ofisa0 at ofbus2 (isa)
dma-controller@i00 at ofisa0 not configured
interrupt-controller@i20 at ofisa0 not configured
timer@i40 at ofisa0 not configured
configuration@i15c at ofisa0 not configured
com0 at ofisa0 (serial@i3f8): ns16550a, working fifo
lpt0 at ofisa0 (parallel@i378)
pckbc0 at ofisa0 (8042@i60)
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
power@i380 at ofisa0 not configured
ofbus3 at ofisa0 (gpio@i3e0)
eeprom at ofbus3 not configured
ofrtc0 at ofisa0 (rtc@i70): rtc
ofisascr0 at ofisa0 (scr@i24)
scr0 at ofisascr0
com1 at ofisa0 (ir@i2f8): ns16550a, working fifo
cs0 at ofisa0 (ethernet@i300): CRUS,CS8900
cs0: CS8900 rev. F, address 08:00:2b:81:63:a0, media UTP
joy0 at ofisa0 (game@i201): ESST,game
joy0: joystick not connected
midi@i330 at ofisa0 not configured
ess0 at ofisa0 (sound@i220): ESST,es1887-codec
ess0: ESS Technology ES1887 [version 0x688b]
ess0: audio1 interrupting at irq 9
ess0: audio2 interrupting at irq 15
audio0 at ess0: full duplex, mmap, independent
opl0 at ess0: model OPL3
midi0 at opl0: ESS Yamaha OPL3 (CPU-intensive output)
wdc0 at ofisa0 (ide@i1f0)
atabus0 at wdc0 channel 0
pci at ofbus2 not configured
igsfb0 at ofbus2 (display@it3b0): IGS CyberPro 2010 at 0x06000000
igsfb0: 2MB, 1024x768, 8bpp
wsdisplay0 at igsfb0 kbdmux 1: console (std, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
ofrom0 at ofbus0 (flash@7000000): 0x7000000-0x707ffff
ofrom1 at ofbus0 (romcard@10000000): 0x10000000-0x10ffffff
ofbus4 at ofbus0 (cpus)
cpu@0 at ofbus4 not configured
udp at ofbus0 not configured
timecounter: Timecounter "clockinterrupt" frequency 64 Hz quality 0
clock: hz=64 stathz = 0 profhz = 0
timecounter: Timecounter "i8253" frequency 1193182 Hz quality 100
atapibus0 at atabus0: 2 targets
sd0 at atapibus0 drive 1: <IOMEGA ZIP 100 ATAPI, , 23.D> disk removable
sd0: drive offline
wd0 at atabus0 drive 0: <FUJITSU MHS2040AT>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
---- /etc/XF86Config ----
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "speedo"
Load "freetype"
# Load "xtt"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "Protocol" "wskbd"
Option "Device" "/dev/wskbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
Option "XkbVariant" "nodeadkeys"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "wsmouse"
Option "Device" "/dev/wsmouse"
Option "ZAxisMapping" "4 5"
EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "mon"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 79.0
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# VertRefresh 50-100
VertRefresh 90-100
# replace that with your monitor settings
Modeline "1152x864" 95.00 1152 1184 1312 1504 864 869 872 919 +hsync
+vsync
Modeline "1024x768" 78.75 1024 1040 1136 1336 768 769 772 800 +hsync +vsync
Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
Modeline "640x480" 31.50 640 680 720 864 480 488 491 521
Modeline "640x400" 25.18 640 664 760 800 400 409 411 450
#PreferredMode "1152x864"
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
Section "Device"
Identifier "igs"
Driver "wsfb"
Option "HWcursor" "no"
#VideoRam 2048
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "igs"
Monitor "mon"
DefaultDepth 8
Subsection "Display"
Depth 8
Modes "1152x864" "1024x768"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 32
Modes "1152x864" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
Home |
Main Index |
Thread Index |
Old Index