Port-arm archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: NetBSD on the Kurobox Pro
Donald T Hayford wrote:
It now builds without error. Now to see if it boots!
boot message looks like:
Orion1 CPU = Low
=== KURO U-Boot. ===
** LOADER **
** KUROBOX BOARD: KURO_BOX LE (CFG_ENV_ADDR=fffff000)
U-Boot 1.1.1 (Apr 10 2007 - 18:10:08) Marvell version: 1.12.1 - TINY
DRAM CS[0] base 0x00000000 size 128MB
DRAM Total size 128MB
[256kB@fffc0000] Flash: 256 kB
Addresses 20M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (20M - 16M): Done
NAND: 256 MB
Soc: 88F5182 A2
CPU: ARM926 (Rev 0) running @ 500Mhz
Orion 1 streaming disabled
SysClock = 250Mhz , TClock = 166Mhz
USB 0: host mode
USB 1: host mode
PCI 0: PCI Express Root Complex Interface
PCI 1: Conventional PCI, speed = 33000000
Net: egiga0 [PRIME]
Using 88E1118 phy
hit any key to switch tftp boot.
Hit any key to stop autoboot: 2 0
switched to TFTP boot.
<<system_bootend>>
<<system_bootend>>
Hit any key to stop autoboot: 3 2 0
Marvell>> tftpboot 0x8000 netbsd-ORION.bin
Using egiga0 device
TFTP from server 192.168.11.1; our IP address is 192.168.11.150
Filename 'netbsd-ORION.bin'.
Load address: 0x8000
Loading: *#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#########################################
done
Bytes transferred = 4866036 (4a3ff4 hex)
Marvell>> g 0x8000
## Starting application at 0x00008000 ...
NetBSD/evbarm (orion_nas) booting ...
Loaded initial symtab at 0xc0409470, strtab at 0xc0444758, # entries 15057
pmap_postinit: Allocated 35 static L1 descriptor tables
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 4.99.66 (ORION_NAS) #3: Sat Sep 6 18:47:01 EDT 2008
hayford@Fed8:/home/hayford/net-k/obj/sys/arch/evbarm/compile/ORION_NAS
total memory = 128 MB
avail memory = 119 MB
mainbus0 (root)
cpu0 at mainbus0: ARM926EJ-S rev 0 (ARM9EJ-S core)
cpu0: DC enabled IC enabled WB enabled EABT branch prediction enabled
cpu0: 32KB/32B 1-way Instruction cache
cpu0: 32KB/32B 1-way write-back-locking-C Data cache
orion0 at mainbus0: Marvell MV88F5182 SoC Rev. A0 Orion1
orion0: CPU Clock 400.000 MHz SysClock 200.000 MHz TClock 166.664 MHz
oriontmr0 at orion0 addr 0xf1020300-0xf10203ff: Marvell Orion Timer
oriongpp0 at orion0 addr 0xf1010100-0xf10101ff: Marvell Orion General
Purpose I/O Port Interface
oriongpp0: Data Out: 0x00000000
oriongpp0: Data Out Enable Control: 0xfc01000d
oriongpp0: Data Blink Enable: 0x00000000
oriongpp0: Data In Polarity: 0x00000000
oriongpp0: Data In: 0x0000000d
oriongpp0: Data Interrupt Cause: 0x00000008
oriongpp0: Data Interrupt Mask: 0x00000000
oriongpp0: Data Interrupt Level Mask: 0x00000000
com0 at orion0 addr 0xf1012000-0xf101201f irq 3: ns16550a, working fifo
com0: console
mvsata0 at orion0 addr 0xf1080000-0xf1085fff irq 29: Marvell Serial-ATA
Host Controller (SATAHC)
mvsata0: GenIIe, 1hc, 2port/hc
atabus0 at mvsata0 channel 0
atabus1 at mvsata0 channel 1
ehci0 at orion0 addr 0xf1050000-0xf1051fff irq 17: Marvell Orion USB 2.0
Interface
usb0 at ehci0: USB revision 2.0
ehci1 at orion0 addr 0xf10a0000-0xf10a1fff irq 12: Marvell Orion USB 2.0
Interface
usb1 at ehci1: USB revision 2.0
orionpex0 at orion0 addr 0xf1040000-0xf1041fff irq 11: Marvell Orion PCI
Express Interface
pci0 at orionpex0
Marvell 88F5182 SoC Orion1 (miscellaneous memory, revision 0x02) at pci0
dev 0 function 0 not configured
orionpci0 at orion0 addr 0xf1030000-0xf1031fff: Marvell Orion PCI Interface
PCI: bus 1, device 0, function 0: reserved mapping type 0x6
PCI: bus 1, device 0, function 0: reserved mapping type 0x6
PCI: bus 1, device 0, function 0: reserved mapping type 0x6
PCI: bus 1, device 0, function 1: reserved mapping type 0x6
PCI: bus 1, device 0, function 1: reserved mapping type 0x6
PCI: bus 1, device 0, function 1: reserved mapping type 0x6
PCI: bus 1, device 0, function 2: reserved mapping type 0x6
PCI: bus 1, device 0, function 2: reserved mapping type 0x6
PCI: bus 1, device 0, function 2: reserved mapping type 0x6
PCI: bus 1, device 0, function 3: reserved mapping type 0x6
PCI: bus 1, device 0, function 3: reserved mapping type 0x6
PCI: bus 1, device 0, function 3: reserved mapping type 0x6
PCI: bus 1, device 0, function 4: reserved mapping type 0x6
PCI: bus 1, device 0, function 4: reserved mapping type 0x6
pci1 at orionpci0
Marvell 88F5182 SoC Orion1 (miscellaneous memory, revision 0x02) at pci1
dev 0 function 0 not configured
Marvell 88F5182 SoC Orion1 (miscellaneous memory, revision 0x02) at pci1
dev 0 function 1 not configured
Marvell 88F5182 SoC Orion1 (miscellaneous memory, revision 0x02) at pci1
dev 0 function 2 not configured
Marvell 88F5182 SoC Orion1 (miscellaneous memory, revision 0x02) at pci1
dev 0 function 3 not configured
Marvell 88F5182 SoC Orion1 (miscellaneous memory, revision 0x02) at pci1
dev 0 function 4 not configured
Marvell 88F5182 SoC Orion1 (miscellaneous memory, revision 0x02) at pci1
dev 0 function 5 not configured
Marvell 88F5182 SoC Orion1 (miscellaneous memory, revision 0x02) at pci1
dev 0 function 6 not configured
Marvell 88F5182 SoC Orion1 (miscellaneous memory, revision 0x02) at pci1
dev 0 function 7 not configured
...[system hangs up at this point]...
Getting closer. Seems to be some problems with the orionpci0 device.
Regards, Don
Home |
Main Index |
Thread Index |
Old Index