Re: NetBSD on Raspberry Pi 3

[Jun Ebihara <jun%soum.co.jp@localhost>]

From: Jun Ebihara <jun%soum.co.jp@localhost>
Subject: Re: NetBSD on Raspberry Pi 3
Date: Fri, 16 Dec 2016 10:11:29 +0900 (JST)

>>>- I've got report not to boot with Sandisk/SONY/Toshiba microSD.
>> So far I didn't have a boot problem with various Sandisk Ultra SD cards.
> I've got another report,and I hook up Kingston card and boot failed.
> With Kingston microSDXC 64GB Class10 UHS-I SDC10G2/64GB-AM
> https://www.amazon.co.jp/gp/product/B01BBRNKKW/
> 
> with RPI3 earmv6hf :
> http://p.twpl.jp/show/orig/6fyKT
> 
> sdhc0: SDHC 3,0. rev 153,platform DMS 250000 kHz, HS SDR50 3.3V, re-tuning mode 1,1024 bytes 
> sdhc0: cmd end bit error
> sdmmc0: couldn't identify card
> sdmmc0: no functions
>    :
> boot device: <unknown>
> unknown device major 0xffffffffffffffff
> root device:

Transcend microSDHC 32GB Class10 UHS-I ... succeed

sdhc0 at obio0 intr 190: SDHC controller
sdhc0: interrupting on intr 190
sdhc0: SDHC 3.0, rev 153, platform DMA, 250000 kHz, HS SDR50 3.3V, re-tuning mode 1, 1024 byte blocks
sdmmc0 at sdhc0 slot 0
ld0 at sdmmc0: <0x74:0x4a60:USDU1:0x20:0x02405b67:0x106>
ld0: 30735 MB, 7805 cyl, 128 head, 63 sec, 512 bytes/sect x 62945280 sectors
ld0c: error reading fsbn 0 (ld0 bn 0; cn 0 tn 0 sn 0)
ld0: dos partition I/O error
ld0: 4-bit width, SDR50, 100.000 MHz
boot device: ld0


Kingston microSDXC 64G Class10 ... failed
with SDMMC_DEBUG on /usr/src/sys/dev/sdmmc/sdmmc.c

sdhc0: SDHC 3.0, rev 153sdhc8: software reset reg=00000001,platform DMA,250000 kHz, HS SDR50 3.3V, re-tuning mode 1,1024 byte blocks
sdhc0 at sdhc0 slot 0
sdhc0: writing cmd 5 arg=00000000 data=0x0 dlen=0 flags=0004302, status=0
sdhc0: writing cmd: blksize=0 blkcnt=0 mode=0002 cmd=0502
sdhc0: cmd timeout (excepted)
sdhc0: software reset reg=00000006
sdhc_exec_command: timeout for command

--
Jun Ebihara