Re: RockPro64 non-boot

[Jared McNeill <jmcneill%invisible.ca@localhost>]

Fixed with the following commit:
http://mail-index.netbsd.org/source-changes/2018/11/13/msg100572.html

On Tue, 13 Nov 2018, Jared McNeill wrote:

> Looking into this now..
>
> On Mon, 12 Nov 2018, John Klos wrote:
>
> > This is my first boot on a new 4 gig RockPro64 using:
> >
> > NetBSD-evbarm-aarch64-201811111550Z-rockpro64.img.gz
> >
> > Thoughts?
> >
> >
> >
> > U-Boot 2017.09-rockchip-ayufan-1025-g482cd6ec8b (Jul 26 2018 - 08:18:55 
> > +0000)
> >
> > Model: Pine64 RockPro64
> > DRAM:  3.9 GiB
> > DCDC_REG1@vdd_center: ; enabling
> > DCDC_REG2@vdd_cpu_l: ; enabling
> > DCDC_REG3@vcc_ddr: ; enabling (ret: -38)
> > DCDC_REG4@vcc_1v8: set 1800000 uV; enabling
> > LDO_REG1@vcc1v8_dvp: set 1800000 uV; enabling
> > LDO_REG2@vcc3v0_touch: set 3000000 uV; enabling
> > LDO_REG3@vcc1v8_pmu: set 1800000 uV; enabling
> > LDO_REG4@vcc_sd: set 33LDO_REG6@vcc_1v5: set 1500000 uV; enabling
> > LDO_REG7@vcca1v8_codec: set 1800000 uV; enabling
> > LDO_REG8@vcc_3v0: set 3000000 uV; enabling
> > SWITCH_REG1@vcc3v3_s3: ; enabling (ret: -38)
> > SWITCH_REG2@vcc3v3_s0: ; enabling (ret: -38)
> > vcc1v8-s0@vcc1v8_s0: set 1vcc-phy-regulator@vcc_phy: ; enabling (ret: -38)
> > vdd-log@vdd_log: ; enabling (ret: -38)
> > MMC:   sdhci@fe330000: 0, dwmmc@fe320000: 1
> > SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 
> > MiB
> > *** Warning - bad CRC, using default environment
> >
> > In:    serial@ff1a0000
> > Out:   serial@ff1a0000
> > Err:   serial@ff1a0000
> > Model: Pine64 RockPro64
> > Net:   eth0: ethernet@fe300000
> > Hit any key to stop autoboot:  0
> > Card did not respond to voltage select!
> > mmc_init: -95, time 19
> > switch to partitions #0, OK
> > mmc1 is current device
> > Scanning mmc 1:1...
> > reading /dtb/rockchip/rk3399-rockpro64.dtb
> > 77133 bytes read in 11 ms (6.7 MiB/s)
> > Found EFI removable media binary efi/boot/bootaa64.efi
> > reading efi/boot/bootaa64.efi
> > 151976 bytes read in 15 ms (9.7 MiB/s)
> > ## Starting EFI application at 02000000 ...
> > Card did not respond to voltage select!
> > mmc_init: -95, time 20
> >
> >
> > > > NetBSD/evbarm EFI Boot (aarch64), Revision 1.6 (Sun Nov 11 12:03:08 UTC 
> > 2018) (from NetBSD 8.99.25)
> > Press return to boot now, any other key for boot prompt
> > booting netbsd - starting in 0 seconds.
> > 5329788+1980216+1530384+1820504 [650112+437912]=0xc3c560
> > ok
> > [   1.0000000] uboot: args 0xf4400000, 0, 0, 0
> > [   1.000000
> > [   1.0000000] FDT /memory [3] @ 0xf34a2000 size 0x123d000
> > [   1.0000000] FDT /memory [4] @ 0xf46e2000 size 0x800000
> > [   1.0000000] FDT /memory [5] @ 0xf4ee4000 size 0x23000
> > [   1.0000000] FDT /memory [6] @ 0xf4f07000 size 0x309d000
> > [   1.0000000] FD[   1.0000000] initarm: fdt_build_bootconfig
> > [   1.0000000] Usable memory:
> > [   1.0000000]   200000 - 81fffff
> > [   1.0000000]   8213000 - 8213fff
> > [   1.0000000]   8215000 - f46defff
> > [   1.0000000]   f46e2000 - f4ee1fff
> > [   1.0000000]   f4ee4000 - f7fa3[   1.0000000] fdt_map_efi_runtime: 
> > netbsd,uefi-runtime-data f4ee3000-f4ee3fff 
> > (ffff800000000000-ffff800000000fff)
> > [   1.0000000] Creating KSEG tables for 
> > 0x0000000000200000-0x00000000f8000000
> > [   1.0000000] cpu_kernel_vm_init: kernel phys start f36000001.0000000] 
> > f4ee4000 - f7fa3fff
> > [   1.0000000]   f7fa5000 - f7ffffff
> > [   1.0000000] ------------------------------------------
> > [   1.0000000] kern_vtopdiff         = 0xffffffbf0ca00000
> > [   1.0000000] physical_start        = 0x0000000000200000
> > [   1.0ffffffc000c00000
> > [   1.0000000] (kernel va area)
> > [   1.0000000] (devmap va area)      = 0xfffffffff0000000
> > [   1.0000000] VM_MAX_KERNEL_ADDRESS = 0xffffffffffe00000
> > [   1.0000000] ------------------------------------------
> > [   1.0000000] mpstart
> > [   1.0000000] ksyms: checking .text
> > [   1.0000000] ksyms: checking .rodata
> > [   1.0000000] ksyms: checking link_set_evcnts
> > [   1.0000000] ksyms: checking .eh_frame
> > [   1.0000000] ksyms: checking link_set_arm_platforms
> > [   1.0000000] ksyms: checking link_set_sysctl_funcs
> > [   1.0000000] ksyms: checking link_set_fdt: checking .data
> > [   1.0000000] ksyms: checking .data.cacheline_aligned
> > [   1.0000000] ksyms: checking .data.read_mostly
> > [   1.0000000] ksyms: checking .bss
> > [   1.0000000] ksyms: checking .ident
> > [   1.0000000] ksyms: checking .comment
> > [   1.0000000] [   1.0000000] Loaded initial symtab at 0xffffffc000867960, 
> > strtab at 0xffffffc0009064e0, # entries 27088
> > [   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 
> > 2003, 2004, 2005,
> > [   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012
> >                                                           [   1.0000000] 
> > NetBSD 8.99.25 (GENERIC64) #0: Sun Nov 11 12:03:08 UTC 2018
> > [   1.0000000] 
> > mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/evbarm/compile/GENERIC64
> > [   1.0000000] total memory = 3954 MB
> > [   1.0000000] avail memory = 3827 MB
> > [   1.0000000] armfdt0 (root)
> > [   1.0000000] simplebus0 at armfdt0: Pine64 RockPro64
> > [   1.0000000] cpus0 at simplebus0
> > [   1.0000000] cpu0 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core)
> > [   1.0000000] cpu0: package 0, core 0, smt 0
> > [   1.0000000] cpu0: IC enabled, DC enabled, EL0/EL1 stack Alignment check 
> > enabled
> > [   1.0000000] cpu1 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core)
> > [   1.0000000] cpu1: package 0, core 1, smt 0
> > [   1.0000000] cpufreqdt1 at cpu1
> > [   1.0000000] cpu2 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core)
> > [   1.0000000] cpu2: package 0, core 2, sm[   1.0000000] cpu3 at cpus0: 
> > Cortex-A53 r0p4 (Cortex V8-A core)
> > [   1.0000000] cpu3: package 0, core 3, smt 0
> > [   1.0000000] cpufreqdt3 at cpu3
> > [   1.0000000] cpu4 at cpus0: Cortex-A72 r0p2 (Cortex V8-A core)
> > [   1.0000000] cpu4: package 1, core 0, smat cpus0: Cortex-A72 r0p2 (Cortex 
> > V8-A core)
> > [   1.0000000] cpu5: package 1, core 1, smt 0
> > [   1.0000000] cpufreqdt5 at cpu5
> > [   1.0000000] simplebus1 at simplebus0
> > [   1.0000000] simplebus2 at simplebus0
> > [   1.0000000] gicvthree0 at simplebus0: GICv3
> > [   1.0000000] panic: bus_dmamem_alloc failed: 12
> > [   1.0000000] cpu0: Begin traceback...
> > [   1.0000000] trace fp ffffffc00097d830
> > [   1.0000000] fp ffffffc00097d850 vpanic() at ffffffc0003f4fc0 
> > netbsd:vpanic+0x190
> > [   1.0000000] fp ffffffc00097d8b0 panic() at ffffffc[   1.0000000] fp 
> > ffffffc00097d940 gicv3_dma_alloc() at ffffffc0000071dc 
> > netbsd:gicv3_dma_alloc+0x11c
> > [   1.0000000] fp ffffffc00097d980 gicv3_init() at ffffffc0000077a4 
> > netbsd:gicv3_init+0x454
> > [   1.0000000] fp ffffffc00097d9d0 gicv3_fdt_attach() at 
> > fffnetbsd:gicv3_fdt_attach+0x318
> > [   1.0000000] fp ffffffc00097da50 config_attach_loc() at ffffffc0003dc9d4 
> > netbsd:config_attach_loc+0x184
> > [   1.0000000] fp ffffffc00097daa0 config_found_sm_loc() at 
> > ffffffc0003dcaf0 netbsd:config_found_sm_loc+0x50
> > [   1.00netbsd:fdt_scan+0x188
> > [   1.0000000] fp ffffffc00097dcb0 fdt_rescan() at ffffffc0004d6f78 
> > netbsd:fdt_rescan+0x38
> > [   1.0000000] fp ffffffc00097dce0 config_attach_loc() at ffffffc0003dc9d4 
> > netbsd:config_attach_loc+0x184
> > [   1.0000000] fp ffffffc00097dd30[   1.0000000] fp ffffffc00097ddd0 
> > config_attach_loc() at ffffffc0003dc9d4 netbsd:config_attach_loc+0x184
> > [   1.0000000] fp ffffffc00097de20 cpu_configure() at ffffffc00003c354 
> > netbsd:cpu_configure+0x44
> > [   1.0000000] fp ffffffc00097de50 main() at 
> > ffffffnetbsd:aarch64_start+0x103c
> > [   1.0000000] cpu0: End traceback...
> > Stopped in pid 0.1 (system) at  netbsd:cpu_Debugger+0x4:        ret
> > db{0}>