Re: sdmmc on Kirkwood?

[Martin Husemann <martin%duskware.de@localhost>]

I have:

sdmmc0 at mvsdio0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "mvsoctmr0" frequency 200000000 Hz quality 100
uhub0 at usb0: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, add
r 1
uhub0: 1 port with 1 removable, self powered
mvsata0 port 0: device present, speed: 3.0Gb/s
sdmmc0: autoconfiguration error: bad CIS ptr 0
sdmmc0: autoconfiguration error: couldn't read CIS
sdmmc0: autoconfiguration error: i/o init failed
sdmmc0: autoconfiguration error: bad CIS ptr 0
sdmmc0: autoconfiguration error: couldn't read CIS
sdmmc0: autoconfiguration error: i/o init failed
"Marvell, 802.11 SDIO ID: 10, " (manufacturer 0x2df, product 0x9103) at sdmmc0 f
unction 1 not configured
"Marvell, 802.11 SDIO ID: 10, " (manufacturer 0x2df, product 0x9103) at sdmmc0 function 2 not configured

on a GuruPlug running -current. No traces of any misbehaviour (and there is
no SD card in that machine, it netboots).

I have, however, serious trouble using SATA on one of those machines, neither
-8 nor -current work, it is stuck with netbsd-7 for now.

The (identical) machine above is happy with it's sata disks (behind a PMP),
and I have been unable to pinpoint the differences (besides the real disk
used) to the non-working setup.

atabus0 at mvsata0 channel 0: SATA port multiplier, 15 ports
atabus0: vendor 0x197b, product 0x0325, revision 1.1, level 0
atabus0 PMP port 0: device present, speed: 1.5Gb/s
atabus0 PMP port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0
wd0: <WDC WD740GD-00FLA2>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 70911 MB, 144073 cyl, 16 head, 63 sec, 512 bytes/sect x 145226112 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1 at atabus0 drive 1
wd1: <WDC WD740GD-00FLA2>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 70911 MB, 144073 cyl, 16 head, 63 sec, 512 bytes/sect x 145226112 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(mvsata0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1(mvsata0:0:1): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)


Martin