2021-01-16-netbsd-raspi-aarch64.img

[Jun Ebihara <jun%soum.co.jp@localhost>]

I've updated 2021-01-16-netbsd-raspi-aarch64.img.gz for RPI4.

http://cdn.netbsd.org/pub/NetBSD/misc/jun/raspberry-pi/2021-01-16-aarch64/2021-01-16-netbsd-raspi-aarch64.img.gz
http://cdn.netbsd.org/pub/NetBSD/misc/jun/raspberry-pi/2021-01-16-aarch64/MD5

Topics:
- boot via UEFI_VER=v1.22
 https://github.com/pftf/RPi4/releases

Raspberry Pi 4 UEFI Firmware v1.22
    Fix settings not being stored or being corrupted on reset (#78, #82) [tianocore/edk2-platforms@94e9fba tianocore/edk2-platforms@ae6c236]
    Add internal changes for the eventual support of CM4 & Pi400 [tianocore/edk2-platforms@100e360]
    Fix type of PMU GSIV in GICC (#103) [tianocore/edk2-platforms@734fed7]
    Switch back to the old coloured logo [tianocore/edk2-non-osi@3d1bb66]
    Fix cursor appearing on top of logo (#115) [tianocore/edk2@b585238]

Important Note: The start4.elf and fixup4.dat used in this release are the 2020.12.01 ones, as using newer versions broke xHCI initialization (raspberrypi/firmware#1518, raspberrypi/firmware#1495) with newer revisions of the Bcm2711 SoC. Do not be tempted to use more recent versions of start4.elf, as, unless you are using an old Pi 4 model, this will most likely break USB support.

- only for RPI4 
  (fill dtb for RPI3?)
- build script
 https://github.com/ebijun/NetBSD/tree/master/RPI/RPIimage/Image/aarch64
- [Issue] Can't recognize DOS partition from Windows

pkgsrc Failed: 
 MesaLib-20.0.6nb1 
 mpv-0.33.0nb1 
 libappindicator-12.10.0nb8 
 mate-control-center-1.24.0nb5 

RPI4 status:
- boot via UEFI_VER=v1.22
 https://github.com/pftf/RPi4/releases
 copy pre-setted RPI_EFI.fd
  serial ,should not set graphical
  disable 3GB -> recognize 4GB
- HDMI: works
- audio: not known
- USB device: works
- bwfm0 Wireless network:?
  (works well on RPI3,not works on RPI4?)
- Pi 4 Bootloader Configuration
  https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2711_bootloader_config.md

Update:
- NetBSD-current 9.99.77 evbarm-aarch64 202101150750Z arm64.img from nyftp.
- boot via UEFI_VER=v1.21
- pkginfo
 https://github.com/ebijun/NetBSD/blob/master/RPI/RPIimage/Image/aarch64/pkginfo
- sysinfo
 https://github.com/ebijun/NetBSD/blob/master/RPI/RPIimage/Image/aarch64/sysinfo

Update from 2020-12-23:
https://github.com/ebijun/NetBSD/commit/8488402400c2156a602710cca1b9788e2cb88fbc

sysinfo:
 dhcpcd-9.4.0 sh-20181212-20210115053449Z
 tzdata-2020f

pkgsrc:
 bash-5.1.4 git-base-2.30.0 gobject-introspection-1.66.1nb1
 graphite2-1.3.14 gtk2+-2.24.33 gtk3+-3.24.24 harfbuzz-2.7.4
 icu-68.2 libcups-2.3.3op1 libgpg-error-1.41
 mozilla-rootcerts-1.0.20201204 p11-kit-0.23.22nb1
 pango-1.48.0 py38-cElementTree-3.8.7 py38-expat-3.8.7
 python38-3.8.7 ruby26-mikutter-4.1.4 ruby26-moneta-1.4.1
 ruby26-nokogiri-1.11.1 ruby26-pkg-config-1.4.4
 ruby26-racc-1.5.2nb1 ruby26-unf_ext-0.0.7.7
 tiff-4.2.0 wget-1.21.1 zsh-5.8nb2 zstd-1.4.8

- mate/firefox/inkscape/libreoffice works well
  pkg_add mate
  pkg_add gvfs
  pkg_add firefox
  pkg_add firefox-l10n
  pkg_add libreoffice
  pkg_add inkscape
  pkg_add gimp
  pkg_add scribus
  pkg_add py38-sphinx
  pkg_add wxGTK30

- pkgin: upgrade failed
- raspberry-pi userland: compile failed 

Pre-installed packages:
  bash
  tcsh
  vlgothic-ttf
  icewm
  xli
  ruby26-mikutter
  uim
  fossil
  sudo
  git-base
  zsh
  mlterm
  pkg_chk
  lintpkgsrc
  mozilla-rootcerts
  dillo
  medit
  lrzsz

- pre-build packages:
  See /etc/pkg_install.conf
  PKG_PATH=http://cdn.netbsd.org/pub/NetBSD/misc/jun/raspberry-pi/aarch64/2020-08-22/

pkgsrc: 
  # cd /usr
  # ftp http://cdn.netbsd.org/pub/pkgsrc/current/pkgsrc.tar.gz
  # ls /usr/pkgsrc                ... check if exists.
  # tar tzvf pkgsrc.tar.gz |head  ... check the archive
  # tar xzvf pkgsrc.tar.gz        ... extract
  # ls /usr/pkgsrc                ... check what extracted
  # pkg_chk -g                    ... List to/usr/pkgsrc/pkgchk.conf
  # (cd /usr/pkgsrc;cvs update -PAd) ... update
  # pkg_chk -un                   ... Update (listup)
  # pkg_chk -u                    ... Update

EEPROM verson:
 Check&update with Raspberry Pi OS (pi:raspberry)
 pi@raspberrypi:~ $ cat /etc/default/rpi-eeprom-update 
 FIRMWARE_RELEASE_STATUS="stable"
 pi@raspberrypi:~ $ sudo rpi-eeprom-update
 BCM2711 detected
 Dedicated VL805 EEPROM detected
 BOOTLOADER: up-to-date
 CURRENT: Thu 16 Jul 15:15:46 UTC 2020 (1594912546)
 LATEST: Thu 16 Jul 15:15:46 UTC 2020 (1594912546)
 FW DIR: /lib/firmware/raspberrypi/bootloader/stable
 VL805: up-to-date
 CURRENT: 000138a1
 LATEST: 000138a1

--
Jun Ebihara