Port-arm archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: Orange Pi 5 weirdness
bsiegert%gmail.com@localhost (Benny Siegert) writes:
>eqos0 at acpi0 (MAC1, PRP0001-61): mem 0xfe1c0000-0xfe1cffff irq 266,265
>eqos0: DesignWare EQOS ver 0x51 (0x30)
>eqos0: hw features 1a1173f7 111e01e8 11041041 0c370031
>eqos0: using 32-bit DMA
>eqos0: autoconfiguration error: Wrong MAC address. Clear the multicast
>bit.
>eqos0: Ethernet address c4:ab:14:c6:33:37
>There are two ukphy devices attaching to the eqos0.
The two ukphy's come from using the wildcard MII address. It should not
have a bad effect. An FDT attachment could provide something like a
mii-id or rgmii-id, no idea if ACPI can provide this.
The eqos here has a rgephy which also appeared twice. A quick fix
was to change eqos_acpi.c to use address 0 instead of MII_PHY_ANY.
The "Wrong MAC address" comes from swapping bytes in the MAC address,
clearing the multicast bit makes it a valid address.
Home |
Main Index |
Thread Index |
Old Index