Re: Radxa Orion O6

[FUKAUMI Naoki <naoki%radxa.com@localhost>]

On 1/30/25 21:15, FUKAUMI Naoki wrote:
> On 1/30/25 21:05, Jared McNeill wrote:
> > Can you open a PR for these two issues? (poor network performance and 
> > zero MAC address) It will be easier to track them separately, and 
> > there are likely experts on the networking side not following this 
> > mailing list that can help.
>
> Of course I will. I need to remember how to send-pr though. ;)
>
> By the way, the MAC address is zero because my board is a prototype. As 
> for performance, I just ordered a 5GbE NIC for my PC, so I'll check it 
> out with that.

https://gnats.netbsd.org/cgi-bin/query-pr-single.pl?number=59044

With rge(4) it reached 4.2Gbps.

# 4.7Gbps on Linux...

----
orion-o6# schedctl -A 0 iperf3 -c 169.254.31.236
Connecting to host 169.254.31.236, port 5201
[  5] local 169.254.180.163 port 65480 connected to 169.254.31.236 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec   494 MBytes  4.12 Gbits/sec    0   8.00 MBytes 

[  5]   1.00-2.01   sec   505 MBytes  4.20 Gbits/sec    0   8.00 MBytes 

[  5]   2.01-3.01   sec   497 MBytes  4.17 Gbits/sec    0   8.00 MBytes 

[  5]   3.01-4.01   sec   500 MBytes  4.19 Gbits/sec    0   8.00 MBytes 

[  5]   4.01-5.01   sec   498 MBytes  4.18 Gbits/sec    0   8.00 MBytes 

[  5]   5.01-6.01   sec   501 MBytes  4.20 Gbits/sec    0   8.00 MBytes 

[  5]   6.01-7.01   sec   497 MBytes  4.17 Gbits/sec    0   8.00 MBytes 

[  5]   7.01-8.01   sec   500 MBytes  4.19 Gbits/sec    0   8.00 MBytes 

[  5]   8.01-9.01   sec   501 MBytes  4.20 Gbits/sec    0   8.00 MBytes 

[  5]   9.01-10.02  sec   498 MBytes  4.18 Gbits/sec    0   8.00 MBytes 

- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.02  sec  4.87 GBytes  4.18 Gbits/sec    0             sender
[  5]   0.00-10.02  sec  4.87 GBytes  4.18 Gbits/sec 
receiver

iperf Done.
----



For reference, below are the test results of rge(4) on NetBSD-current/amd64.

----
nbsd# iperf3 -c 169.254.175.117
Connecting to host 169.254.175.117, port 5201
[  5] local 169.254.211.112 port 65527 connected to 169.254.175.117 port 
5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.01   sec   515 MBytes  4.28 Gbits/sec    0   1.10 MBytes 

[  5]   1.01-2.02   sec   566 MBytes  4.70 Gbits/sec    0   1.66 MBytes 

[  5]   2.02-3.02   sec   561 MBytes  4.71 Gbits/sec    0   2.08 MBytes 

[  5]   3.02-4.02   sec   560 MBytes  4.69 Gbits/sec    0    863 KBytes 

[  5]   4.02-5.02   sec   560 MBytes  4.70 Gbits/sec    0   1.30 MBytes 

[  5]   5.02-6.02   sec   560 MBytes  4.70 Gbits/sec    0    933 KBytes 

[  5]   6.02-7.02   sec   560 MBytes  4.70 Gbits/sec    0   1.09 MBytes 

[  5]   7.02-8.02   sec   559 MBytes  4.69 Gbits/sec    0    672 KBytes 

[  5]   8.02-9.02   sec   560 MBytes  4.69 Gbits/sec    0   1.25 MBytes 

[  5]   9.02-10.02  sec   560 MBytes  4.69 Gbits/sec    0    573 KBytes 

- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.02  sec  5.43 GBytes  4.65 Gbits/sec    0             sender
[  5]   0.00-10.02  sec  5.43 GBytes  4.65 Gbits/sec 
receiver

iperf Done.
----

Best regards,

--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.