Hi,

I've just tested the new bouyer's siop driver
for 53C8xx SCSI on my CATS. It works fine ;-)

Great job, Manuel!

---
NetBSD 1.4X (DIAMANTE) #164: Sun Apr 30 03:06:23 JST 2000
    tsutsui@diamante:/usr/src/sys/arch/arm32/compile/DIAMANTE
total memory = 98304 KB
avail memory = 86200 KB
using 307 buffers containing 5016 KB of memory
mainbus0 (root)
cpu0 at mainbus0: SA-110 rev 3 DC enabled IC enabled WB enabled EABT
footbridge0 at mainbus0: DC21285 rev 3
pci0 at footbridge0 bus 0
pci0: i/o space, memory space enabled
pcib0 at pci0 dev 7 function 0
pcib0: Acer Labs M1543 PCI-ISA Bridge (rev. 0xc3)
vga0 at pci0 dev 8 function 0: S3 ViRGE/DX (rev. 0x01)
wsdisplay0 at vga0: console (80x25, vt100 emulation)
wsdisplay0: screen 1-7 added (80x25, vt100 emulation)
tlp0 at pci0 dev 9 function 0: DECchip 21143 Ethernet, pass 3.0
tlp0: interrupting at irq 8
tlp0: Ethernet address 00:48:54:00:a3:04
tlp0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX
siop0 at pci0 dev 10 function 0: Symbios Logic 53c875 (ultra-wide scsi)
siop0: using irq 9 for native-PCI interrupt
scsibus0 at siop0: 16 targets, 8 luns per target

[...snip...]

scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 1 lun 0: <IBM, DCAS-34330, S61A> SCSI2 0/direct fixed
sd0: 4134 MB, 8205 cyl, 6 head, 171 sec, 512 bytes/sect x 8467200 sectors
boot device: wd0
root on wd0a dumps on wd0b

[...snip...]

# fsck -fn /dev/rsd0a
** /dev/rsd0a (NO WRITE)
** Swapped byte order
** File system is already clean
** Last Mounted on /mnt
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
52719 files, 339344 used, 3758007 free \
(18431 frags, 467447 blocks, 0.4% fragmentation)
# 

---
Izumi Tsutsui
tsutsui@ceres.dti.ne.jp