Subject: Re: working X11 patches for cats
To: Chris Gilbert <chris@paradox.demon.co.uk>
From: Nick Hudson <nick@nthcliff.demon.co.uk>
List: port-cats
Date: 07/30/2002 08:22:21
--------------Boundary-00=_9HW1L7CAA9WEZKNUC21B
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 8bit
On Sunday 28 July 2002 12:20 pm, Chris Gilbert wrote:
> Actually turns out this patch works fine, I was trying to push the gx
> card at a resoultion it didn't like in some way, dropping from 1152x968
> to 1024x768 and the gfx problems went away. As for the keyboard adding
> the Option "XkbDisable" to the keyboard section seemed to make the
> keyboard work, still needs to be investigated as without xkb I've got a
> gb keyboard but getting US chars from it 8)
OK, I built and run this on my CATS with and S3 ViRGE/DX or /GX (see the log
attached)
> Perforamance seems ok, aslong as you're not after xkobo, which causes
> some odd gfx problems, not sure if it's the gfx card or X (but X runs at
> near 100% when playing xkobo, so I've got to investigate further)
xkobo works fine for me. XFree take 20% of CPU.
> On Wed, 2002-07-24 at 19:38, Chris Gilbert wrote:
[...]
> > Note that some of the patch is rather icky in places, but it almost
> > works. I've not figured out why the keyboard doesn't work yet, or why
> > there's screen corruption, I'm wondering about the SA having a writeback
> > cache has some bearing on the screen corruption. I'm also not sure
> > about the console defines I'm using, if one of them is confusing the
> > build.
Keyboard works fine and I'm not getting any coruption.
> > Note that if anyone does try it they'll need remote access to kill the X
> > server. Basically I wanted to show progress, and allow others to have a
> > fiddle 8)
huh? X starts and stops fine for me.
> > Note that you need a recent xsrc with 1.6.x or 1.6 -current for the
> > /dev/pci interfaces (you may need to run MAKEDEV pci0 in /dev
Yep, I needed MAKEDEV pci0
Good work Chris. Commit!
Nick
--------------Boundary-00=_9HW1L7CAA9WEZKNUC21B
Content-Type: text/x-log;
charset="iso-8859-1";
name="XFree86.0.log"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename="XFree86.0.log"
XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 23 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: NetBSD/cats 1.6_BETA2 [ELF] The NetBSD Foundation, Inc.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Jul 30 06:58:48 2002
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "gb"
(**) XKB: layout: "gb"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(--) Using pcvt driver (version 3.32)
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:07:0: chip 10b9,1533 card 0000,0000 rev c3 class 06,01,00 hdr 00
(II) PCI: 00:08:0: chip 10b7,5900 card 0000,0000 rev 00 class 02,00,00 hdr 00
(II) PCI: 00:0a:0: chip 5333,8a01 card 5333,8a01 rev 01 class 03,00,00 hdr 00
(II) PCI: 00:10:0: chip 10b9,5229 card 0000,0000 rev c1 class 01,01,ea hdr 00
(II) PCI: 00:11:0: chip 10b9,7101 card 0000,0000 rev 00 class 06,80,00 hdr 00
(II) PCI: 00:14:0: chip 10b9,5237 card 0000,0000 rev 03 class 0c,03,10 hdr 00
(II) PCI: End of PCI scan
(II) PCI-to-ISA bridge:
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x00 (VGA_EN is cleared)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(0:10:0) S3 ViRGE/DX or /GX rev 1, Mem @ 0x0c000000/26, BIOS @ 0x10000000/16
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0x00000000 - 0x00000000 (0x1) MX[B]
[2] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[3] -1 0x00000000 - 0x00000000 (0x1) IX[B]
(II) Active PCI resource ranges:
[0] -1 0x10010000 - 0x1001ffff (0x10000) MX[B]E
[1] -1 0x10000000 - 0x1000ffff (0x10000) MX[B](B)
[2] -1 0x0c000000 - 0x0fffffff (0x4000000) MX[B](B)
[3] -1 0x0000eca0 - 0x0000ecbf (0x20) IX[B]E
[4] -1 0x0000ecc0 - 0x0000ecff (0x40) IX[B]E
[5] -1 0x0000f0f0 - 0x0000f0ff (0x10) IX[B]E
[6] -1 0x0000f8e0 - 0x0000f8ff (0x20) IX[B]E
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0x10010000 - 0x1001ffff (0x10000) MX[B]E
[1] -1 0x10000000 - 0x1000ffff (0x10000) MX[B](B)
[2] -1 0x0c000000 - 0x0fffffff (0x4000000) MX[B](B)
[3] -1 0x0000eca0 - 0x0000ecbf (0x20) IX[B]E
[4] -1 0x0000ecc0 - 0x0000ecff (0x40) IX[B]E
[5] -1 0x0000f0f0 - 0x0000f0ff (0x10) IX[B]E
[6] -1 0x0000f8e0 - 0x0000f8ff (0x20) IX[B]E
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0x00000000 - 0x00000000 (0x1) MX[B]
[2] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[3] -1 0x00000000 - 0x00000000 (0x1) IX[B]
(II) All system resource ranges:
[0] -1 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0x00000000 - 0x00000000 (0x1) MX[B]
[2] -1 0x10010000 - 0x1001ffff (0x10000) MX[B]E
[3] -1 0x10000000 - 0x1000ffff (0x10000) MX[B](B)
[4] -1 0x0c000000 - 0x0fffffff (0x4000000) MX[B](B)
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x00000000 (0x1) IX[B]
[7] -1 0x0000eca0 - 0x0000ecbf (0x20) IX[B]E
[8] -1 0x0000ecc0 - 0x0000ecff (0x40) IX[B]E
[9] -1 0x0000f0f0 - 0x0000f0ff (0x10) IX[B]E
[10] -1 0x0000f8e0 - 0x0000f8ff (0x20) IX[B]E
(II) ATI: ATI driver (version 6.4.8) for chipsets: ati
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
ATI Rage 128 RL (AGP), ATI Rage 128 SM (AGP),
ATI Rage 128 Pro PD (PCI), ATI Rage 128 Pro PF (AGP),
ATI Rage 128 Pro PP (PCI), ATI Rage 128 Pro PR (PCI),
ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL (AGP),
ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Mobility LE (PCI),
ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE QY (AGP), ATI Radeon VE QZ (AGP),
ATI Radeon Mobility LW (AGP), ATI Radeon Mobility LY (AGP),
ATI Radeon Mobility LZ (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 8500 QN (AGP), ATI Radeon 8500 QO (AGP),
ATI Radeon 8500 Ql (AGP), ATI Radeon 8500 BB (AGP),
ATI Radeon 7500 QW (AGP)
(II) CIRRUS: driver for Cirrus chipsets: CLGD5430, CLGD5434-4, CLGD5434-8,
CLGD5436, CLGD5446, CLGD5480, CL-GD5462, CL-GD5464, CL-GD5464BD,
CL-GD5465, CL-GD7548
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400,
mgag550
(II) GLINT: driver for 3Dlabs chipsets: gamma, gamma2, ti_pm2, ti_pm, r4,
pm4, pm3, pm2v, pm2, pm, 300sx, 500tx, mx, delta
(II) S3: driver (version 0.3.5 for S3 chipset: 964-0, 964-1, 968,
Trio32/64, Aurora64V+
(II) S3VIRGE: driver (version 1.8.3) for S3 ViRGE chipsets: virge, 86C325,
virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2,
86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365,
trio 3d/2x, 86C362, 86C368
(II) SIS: driver for SiS chipsets: SIS5597, SIS530, SIS6326, SIS300,
SIS630, SIS540
(II) SAVAGE: driver (version 1.1.20) for S3 Savage chipsets: Savage4,
Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133,
ProSavage PN133, ProSavage KN133, SuperSavage/MX 128,
SuperSavage/MX 64, SuperSavage/MX 64C, SuperSavage/IX 128,
SuperSavage/IX 128, SuperSavage/IX 64, SuperSavage/IX 64,
SuperSavage/IXC 64, SuperSavage/IXC 64
(II) TRIDENT: driver for Trident chipsets: tvga9000, tvga9000i, tvga8900c,
tvga8900d, tvga9200cxr, tgui9400cxi, cyber9320, cyber9388, cyber9397,
cyber9397dvd, cyber9520, cyber9525dvd, cyberblade/e4, tgui9420dgi,
tgui9440agi, tgui9660, tgui9680, providia9682, providia9685,
cyber9382, cyber9385, 3dimage975, 3dimage985, blade3d, cyberbladei7,
cyberbladei7d, cyberbladei1, cyberbladei1d, cyberbladeAi1,
cyberbladeAi1d, cyberbladeXPm/8, cyberbladeXPm/16, cyberbladeXPAi1
(II) CHIPS: Driver for Chips and Technologies chipsets: ct65520, ct65525,
ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550,
ct65554, ct65555, ct68554, ct69000, ct69030, ct64200, ct64300
(II) TDFX: Driver for 3dfx Banshee/Voodoo3 chipsets: 3dfx Banshee,
3dfx Voodoo3, 3dfx Voodoo5
(II) FBDEV: driver for framebuffer: fbdev, afb
(II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
(II) Primary Device is: PCI 00:0a:0
(--) Chipset virge dx found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0x00000000 - 0x00000000 (0x1) MX[B]
[2] -1 0x10010000 - 0x1001ffff (0x10000) MX[B]E
[3] -1 0x10000000 - 0x1000ffff (0x10000) MX[B](B)
[4] -1 0x0c000000 - 0x0fffffff (0x4000000) MX[B](B)
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x00000000 (0x1) IX[B]
[7] -1 0x0000eca0 - 0x0000ecbf (0x20) IX[B]E
[8] -1 0x0000ecc0 - 0x0000ecff (0x40) IX[B]E
[9] -1 0x0000f0f0 - 0x0000f0ff (0x10) IX[B]E
[10] -1 0x0000f8e0 - 0x0000f8ff (0x20) IX[B]E
(II) resource ranges after probing:
[0] -1 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0x00000000 - 0x00000000 (0x1) MX[B]
[2] -1 0x10010000 - 0x1001ffff (0x10000) MX[B]E
[3] -1 0x10000000 - 0x1000ffff (0x10000) MX[B](B)
[4] -1 0x0c000000 - 0x0fffffff (0x4000000) MX[B](B)
[5] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[6] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[7] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[8] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[9] -1 0x00000000 - 0x00000000 (0x1) IX[B]
[10] -1 0x0000eca0 - 0x0000ecbf (0x20) IX[B]E
[11] -1 0x0000ecc0 - 0x0000ecff (0x40) IX[B]E
[12] -1 0x0000f0f0 - 0x0000f0ff (0x10) IX[B]E
[13] -1 0x0000f8e0 - 0x0000f8ff (0x20) IX[B]E
[14] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[15] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(==) S3VIRGE(0): Depth 8, (==) framebuffer bpp 8
(==) S3VIRGE(0): Default visual is PseudoColor
(==) S3VIRGE(0): Using HW Cursor
(==) S3VIRGE(0): Using fb.
(==) S3VIRGE(0): mx_cr3a_fix.
(==) S3VIRGE(0): XVideo allowed (depends on chipset).
(II) S3VIRGE(0): initializing int10
(II) S3VIRGE(0): No legacy BIOS found -- trying PCI
(II) Truncating PCI BIOS Length to 32768
(II) S3VIRGE(0): VESA BIOS detected
(II) S3VIRGE(0): VESA VBE Version 2.0
(II) S3VIRGE(0): VESA VBE Total Mem: 4096 kB
(II) S3VIRGE(0): VESA VBE OEM: S3 Incorporated. ViRGE /DX /GX
(II) S3VIRGE(0): VESA VBE OEM Software Rev: 1.1
(II) S3VIRGE(0): VESA VBE OEM Vendor: S3 Incorporated.
(II) S3VIRGE(0): VESA VBE OEM Product: ViRGE /DX /GX
(II) S3VIRGE(0): VESA VBE OEM Product Rev: Rev B
(--) S3VIRGE(0): Chipset: "virge dx"
(II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) S3VIRGE(0): VESA VBE DDC supported
(II) S3VIRGE(0): VESA VBE DDC Level 2
(II) S3VIRGE(0): VESA VBE DDC transfer in appr. 1 sec.
(II) S3VIRGE(0): VESA VBE DDC read successfully
(II) S3VIRGE(0): Manufacturer: DEL Model: 708a Serial#: 825773658
(II) S3VIRGE(0): Year: 2000 Week: 8
(II) S3VIRGE(0): EDID Version: 1.2
(II) S3VIRGE(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) S3VIRGE(0): Sync: Separate
(II) S3VIRGE(0): Max H-Image Size [cm]: horiz.: 36 vert.: 27
(II) S3VIRGE(0): Gamma: 2.74
(II) S3VIRGE(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) S3VIRGE(0): First detailed timing is preferred mode
(II) S3VIRGE(0): redX: 0.615 redY: 0.350 greenX: 0.290 greenY: 0.610
(II) S3VIRGE(0): blueX: 0.155 blueY: 0.070 whiteX: 0.281 whiteY: 0.311
(II) S3VIRGE(0): Supported VESA Video Modes:
(II) S3VIRGE(0): 720x400@70Hz
(II) S3VIRGE(0): 640x480@60Hz
(II) S3VIRGE(0): 640x480@75Hz
(II) S3VIRGE(0): 800x600@75Hz
(II) S3VIRGE(0): 1024x768@75Hz
(II) S3VIRGE(0): 1280x1024@75Hz
(II) S3VIRGE(0): Manufacturer's mask: 0
(II) S3VIRGE(0): Supported Future Video Modes:
(II) S3VIRGE(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) S3VIRGE(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) S3VIRGE(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) S3VIRGE(0): #3: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
(II) S3VIRGE(0): #4: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
(II) S3VIRGE(0): Supported additional Video Mode:
(II) S3VIRGE(0): clock: 157.5 MHz Image Size: 355 x 265 mm
(II) S3VIRGE(0): h_active: 1280 h_sync: 1344 h_sync_end 1504 h_blank_end 1728 h_border: 0
(II) S3VIRGE(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1072 v_border: 0
(II) S3VIRGE(0): Serial No: 1238PM18NZ20
(II) S3VIRGE(0): Monitor name: DELL M990
(II) S3VIRGE(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 96 kHz, PixClock max 2550 MHz
(==) S3VIRGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) S3VIRGE(0): videoram: 4096k
(--) S3VIRGE(0): Detected current MCLK value of 47.131 MHz
(WW) S3VIRGE(0): Monitor0: Using default hsync range of 30.00-96.00kHz
(WW) S3VIRGE(0): Monitor0: using default vrefresh range of 50.00-160.00Hz
(II) S3VIRGE(0): Clock range: 20.00 to 270.00 MHz
(II) S3VIRGE(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1792x1344" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1792x1344" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1856x1392" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1856x1392" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1920x1440" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "1920x1440" (horizontal timing out of range)
(II) S3VIRGE(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) S3VIRGE(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(--) S3VIRGE(0): Virtual size is 1400x1050 (pitch 1400)
(**) S3VIRGE(0): Default mode "1400x1050": 155.8 MHz, 81.5 kHz, 74.8 Hz
(II) S3VIRGE(0): Modeline "1400x1050" 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync
(**) S3VIRGE(0): Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz
(II) S3VIRGE(0): Modeline "1400x1050" 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
(**) S3VIRGE(0): Default mode "1280x1024": 157.5 MHz, 91.1 kHz, 85.0 Hz
(II) S3VIRGE(0): Modeline "1280x1024" 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
(**) S3VIRGE(0): Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(II) S3VIRGE(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
(**) S3VIRGE(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) S3VIRGE(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
(**) S3VIRGE(0): Default mode "1280x960": 148.5 MHz, 85.9 kHz, 85.0 Hz
(II) S3VIRGE(0): Modeline "1280x960" 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
(**) S3VIRGE(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) S3VIRGE(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
(**) S3VIRGE(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) S3VIRGE(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
(**) S3VIRGE(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) S3VIRGE(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
(**) S3VIRGE(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) S3VIRGE(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) S3VIRGE(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) S3VIRGE(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) S3VIRGE(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) S3VIRGE(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) S3VIRGE(0): Default mode "1024x768": 44.9 MHz, 35.5 kHz, 87.1 Hz (I)
(II) S3VIRGE(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync
(**) S3VIRGE(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) S3VIRGE(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) S3VIRGE(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) S3VIRGE(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) S3VIRGE(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) S3VIRGE(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) S3VIRGE(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) S3VIRGE(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) S3VIRGE(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) S3VIRGE(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) S3VIRGE(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) S3VIRGE(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) S3VIRGE(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) S3VIRGE(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) S3VIRGE(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) S3VIRGE(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) S3VIRGE(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) S3VIRGE(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) S3VIRGE(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) S3VIRGE(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync
(**) S3VIRGE(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) S3VIRGE(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(**) S3VIRGE(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) S3VIRGE(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync
(--) S3VIRGE(0): Display dimensions: (360, 270) mm
(--) S3VIRGE(0): DPI set to (98, 98)
(II) resource ranges after preInit:
[0] 0 0x0c000000 - 0x0fffffff (0x4000000) MS[B]
[1] -1 0xffffffff - 0xffffffff (0x1) MX[B]
[2] -1 0x00000000 - 0x00000000 (0x1) MX[B]
[3] -1 0x10010000 - 0x1001ffff (0x10000) MX[B]E
[4] -1 0x10000000 - 0x1000ffff (0x10000) MX[B](B)
[5] -1 0x0c000000 - 0x0fffffff (0x4000000) MX[B](B)
[6] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[7] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[8] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[9] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0x00000000 - 0x00000000 (0x1) IX[B]
[11] -1 0x0000eca0 - 0x0000ecbf (0x20) IX[B]E
[12] -1 0x0000ecc0 - 0x0000ecff (0x40) IX[B]E
[13] -1 0x0000f0f0 - 0x0000f0ff (0x10) IX[B]E
[14] -1 0x0000f8e0 - 0x0000f8ff (0x20) IX[B]E
[15] 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[16] 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) S3VIRGE(0): Using FB
(II) S3VIRGE(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
13 256x256 slots
4 512x512 slots
(==) S3VIRGE(0): Backing store disabled
(==) S3VIRGE(0): Silken mouse enabled
(**) Option "dpms"
(**) S3VIRGE(0): DPMS enabled
(**) Option "Protocol" "wsmouse"
(**) Mouse0: Protocol: wsmouse
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/wsmouse0"
(==) Mouse0: Buttons: 3
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
--------------Boundary-00=_9HW1L7CAA9WEZKNUC21B--