What compiler did you use do build the system? I managed to get the 
whole system compiled a while ago but none of the binaries wouldn't run. 
(See the archives if you want more info) I think something was wrong 
with the cross compiler I built. I used the gcc in the netbsd sources.

-Brian

On Thursday, April 25, 2002, at 09:46 PM, Bill Squier wrote:

> Just a note to report that I can now successfully cross-compile a 
> complete
> Dreamcast build from i386 and boot and use the resulting system via 
> IPSLAVE.
>
> Strangely, if I burn the kernel on the ISO, I get:
>
> 	Dreamcast logo
> 	<pause>
> 	Sega logo
> 	<pause>
> 	<flash screen> <flash screen>
> 	[reboot]
>
> but if netcat the exact same kernel to the IPSLAVE loader, everything 
> works.
> Ideas?  Marcus?
>
> Much thanks to msaitoh@netbsd.org for all his work on the toolchain.
>
> dmesg:
> ---
> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
>     The NetBSD Foundation, Inc.  All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>     The Regents of the University of California.  All rights reserved.
>
> NetBSD 1.5ZC (ZOOG) #2: Thu Apr 25 21:04:09 EDT 2002
>     groo@yog-sothoth.old-
> ones.com:/usr/obj/sh3/sys/arch/dreamcast/compile/ZOOG
> SEGA Dreamcast
> total memory = 16384 KB
> avail memory = 12636 KB
> using 230 buffers containing 920 KB of memory
> mainbus0 (root)
> cpu0 at mainbus0: HITACHI SH4 199.600MHz PCLOCK 49.900 MHz
> 8KB/32B direct-mapped Instruction cache.
> 16KB/32B direct-mapped Data cache.
> P0, U0, P3 write-through P1 write-through
> full-associative 4 ITLB, 64 UTLB entries
> single virtual storage mode, SQ access: kernel, wired 61
> shb0 at mainbus0
> scif0 at shb0
> maple0 at shb0
> mapleA at maple0 port 0: Keyboard
> mkbd0 at mapleA: US keyboard
> wskbd0 at mkbd0 (mux ignored): console keyboard
> pvr0 at shb0: 640 x 480, 16bpp, NTSC, composite
> wsdisplay0 at pvr0 (kbdmux ignored): console (80x30, vt100 emulation), 
> using wskbd0
> gdrom0 at shb0: SH4 IRL 9
> g2bus0 at shb0
> gapspci0 at g2bus0: SEGA GAPS PCI Bridge
> pci0 at gapspci0 bus 0
> pci0: memory space enabled
> rtk0 at pci0 dev 0 function 0: SEGA Broadband Adapter
> rtk0: interrupting at SH4 IRL 11
> rtk0: Ethernet address 00:d0:f1:02:47:15
> ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
> ukphy0: OUI 0x000000, model 0x0000, rev. 0
> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> md0: internal 1440 KB image area
> root on rtk0
> nfs_boot: trying DHCP/BOOTP
> nfs_boot: DHCP next-server: 192.168.0.1
> nfs_boot: my_name=zoog
> nfs_boot: my_domain=old-ones.com
> nfs_boot: my_addr=192.168.0.15
> nfs_boot: my_mask=255.255.255.0
> nfs_boot: gateway=192.168.0.4
> root on 192.168.0.1:/s/roots/zoog
> WARNING: preposterous clock chip time
>  -- CHECK AND RESET THE DATE!
> ---
>
> --
> Bill Squier (groo@old-ones.com)                          
> http://www.netbsd.org
>
>         I know I don't deserve another chance, but this _is_ America,
>         and as an American, aren't I entitled to one?  --Sideshow Bob.
>