Subject: Re: Kernel and world files available, and a quick setup guide!
To: Josh Tolbert <hemi@scoundrelz.net>
From: Andy R <quadreverb@yahoo.com>
List: port-dreamcast
Date: 08/31/2002 16:06:06
--- Josh Tolbert <hemi@scoundrelz.net> wrote:
> Hi Andy,
> 	Yeah, I'm pretty certain people are going to need
> to edit their
> Dreamcast /etc/fstab (/mnt/exports/dc/etc/fstab) on
> the nfs server before
> booting the DC. I should probably make a new tarball
> of the world I have
> that I got working with the guide.
> 	As far as error 49:
> 
> bash-2.05$ grep "49" errno.h
> #define EADDRNOTAVAIL   49              /* Can't
> assign requested address
> */
> 	Is your dhcp config correct?

Well, it's up and running now, but I'm getting some
strange errors. I think I know why, I have to try some
stuff again. But for now...

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All
rights reserved.

NetBSD 1.6F (DREAMCAST-NETBOOT) #0: Wed Aug 28
20:20:59 CDT 2002
   
root@netbsd.home.lan:/usr/src/sys/arch/dreamcast/compile/DREAMCAST-NETBOOT
SEGA Dreamcast
total memory = 16384 KB
avail memory = 14052 KB
using 230 buffers containing 920 KB of memory
mainbus0 (root)
cpu0 at mainbus0: HITACHI SH4 199.600MHz PCLOCK 49.900
MHz
8KB/32B direct-mapped Instruction cache.
16KB/32B direct-mapped Data cache.
P0, U0, P3 write-through P1 write-through
full-associative 4 ITLB, 64 UTLB entries
multiple virtual storage mode, SQ access: kernel,
wired 61
shb0 at mainbus0
scif0 at shb0
maple0 at shb0
mapleA at maple0 port 0: Keyboard
mkbd0 at mapleA: US keyboard
wskbd0 at mkbd0 (mux ignored): console keyboard
pvr0 at shb0: 640 x 480, 16bpp, NTSC, composite
wsdisplay0 at pvr0 (kbdmux ignored): console (80x30,
vt100 emulation), using wsk
bd0
gdrom0 at shb0: SH4 IRL 9
g2bus0 at shb0
gapspci0 at g2bus0: SEGA GAPS PCI Bridge
pci0 at gapspci0 bus 0
pci0: memory space enabled
rtk0 at pci0 dev 0 function 0: SEGA Broadband Adapter
rtk0: interrupting at SH4 IRL 11
rtk0: Ethernet address 00:d0:f1:02:89:7f
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media
interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
root on rtk0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP next-server: 192.168.1.7
nfs_boot: my_name=dreamcast
nfs_boot: my_domain=andy.com
nfs_boot: my_addr=192.168.1.8
nfs_boot: my_mask=255.255.255.0
nfs_boot: gateway=192.168.1.254
root on 192.168.1.7:/home/dreamcast/dc
WARNING: preposterous clock chip time
 -- CHECK AND RESET THE DATE!

Nice one! Thanks Josh, it's been fun so far, and I'm
sure there's a lot of fun to come.

Andy

__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com