Re: Crosscompiling NetBSD for Fonera not working with HEAD?

[Fredrik Pettai <pettai%nordu.net@localhost>]

Hi,

On Jun 29, 2009, at 2:07 AM, Arnaud Lacombe wrote:
> Hi,
>
> On Sun, Jun 28, 2009 at 5:56 PM, Fredrik Pettai<pettai%nordu.net@localhost>  
> wrote:
> > ath0 at arbus0 addr 0x10000000 cpu irq 1: Unknown AR531X WLAN
> > ath0: unable to attach hardware; HAL status 3221368608
> > ath0: ath_attach failed
> can you please build a MERAKI kernel with:
>
> options ATHHAL_DEBUG
>
> in the config file to try to get more info from the HAL ?

That by itself didn't give any more information.

However, I looked around in the conf files and noted that in sys/ 
external/isc/atheros_hal/conf/std.ath_hal, these lines were commented  
out:

#options ATHHAL_AR5312
#options ATHHAL_AR2316
#options ATHHAL_AR2317

So I removed the comments, and now the kernel recognize the WiSoc  
2315, but crashes afterwards:

RedBoot> go
MIPS32/64 params: cpu arch: 32
MIPS32/64 params: TLB entries: 16
MIPS32/64 params: Icache: line = 16, total = 16384, ways = 4
                 sets = 256
MIPS32/64 params: Dcache: line = 16, total = 16384, ways = 4
                 sets = 256
  picache_stride    = 4096
  picache_loopcount = 4
  pdcache_stride    = 4096
  pdcache_loopcount = 4
Memory size: 0x01000000
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,  
2005,
    2006, 2007, 2008, 2009
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.14 (FON2100) #0: Mon Jun 29 05:06:15 CEST 2009
        root%netbsd5.99.11@localhost:/usr/obj/sys/arch/evbmips/compile/FON2100
Atheros AR2315
total memory = 16384 KB
avail memory = 12928 KB
mainbus0 (root)
cpu0 at mainbus0: 184.00MHz (hz cycles = 920000, delay divisor = 92)
cpu0: MIPS 4KEc (Rev 2) (0x19064) Rev. 100 with software emulated  
floating point
cpu0: 16KB/16B 4-way set-associative L1 Instruction cache, 16 TLB  
entries
cpu0: 16KB/16B 4-way set-associative write-back L1 Data cache
wdog0 at mainbus0: 5 second period
arbus0 at mainbus0
com0 at arbus0 addr 0x11100000 cpu irq 0 misc irq 0: ns16550a, working  
fifo
com0: console
ae0 at arbus0 addr 0x10500000 cpu irq 2: Atheros AR531X 10/100 Ethernet
ae0: Ethernet address 00:18:84:1b:65:10
ukphy0 at ae0 phy 0: Generic IEEE 802.3u media interface
ukphy0: AC101L 10/100 media interface (OUI 0x0010a9, model 0x0012),  
rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ae0: WARNING: powerhook_establish is deprecated
ath0 at arbus0 addr 0x10000000 cpu irq 1: Atheros 2315 WiSoC
trap: address error (load or I-fetch) in kernel mode
status=0x2, cause=0x50008010, epc=0x1bb958f6, vaddr=0x1bb958f6
pid=0 cmd=system usp=0x0 ksp=0x8030fb60
Stopped in pid 0.1 (system) at  0x1bb958f6:     invalid address.
db>

Do you want output from any commands from the debugger?

Regards,
/P