Hi,
  I seem to be having a problem setting up dca0 on our 380. I can 'tip' to the
 modem and everything works fine. But when I disconnect, DTR on the modem stays
 on. So I cannot setup the modem to drop carrier at logoff. Is there a flag
 I need to set? The 9 pin to 25 pin cable works on pc's so I know the cable is
 ok and I tried setting up mdmbuf on ttys. Any help is appreciated.
 
 Here is the dmesg output. I The flags for dca0 was '1' but I switched it to
 0xe to see if that would help. No luck :-(.
 
 NetBSD 1.1 (shark) #4: Mon Aug 26 12:39:32 GMT 1996
     root@shark:/usr/src/sys/arch/hp300/compile/shark
 HP9000/380/425 (25MHz MC68040 CPU+MMU+FPU, 4k on-chip physical I/D caches)
 real mem = 50323456
 avail mem = 41902080
 using 1228 buffers containing 5029888 bytes of memory
 hil1: US ASCII keyboard
 dma: 98620C with 2 channels, 32 bit DMA
 grf0: 1280 x 1024 256 color hi-res catseye display
 grf0 csr 0x560000
 hpib0 at sc7, ipl 3
 ppi0 at hpib0, slave 5
 dca0: working fifo
 dca0 at sc9, ipl 5, flags 0xe
 dcm0 at sc13, ipl 3, flags 0xe
 hpib1 at sc14, ipl 4
 rd0: 7946A
 rd0 at hpib1, slave 0
 rd1: 7958A
 rd1 at hpib1, slave 1
 dcm1 at sc15, ipl 3, flags 0xe
 le0: hardware address 08:00:09:15:7e:6c
 le0 at sc21, ipl 5
 Changing root device to rd0a
 
 thanks,
 mahesh
--
Mahesh Neelakanta                               Email: mahesh@cse.fau.edu 
Computing Coordinator           Phone: (407) 367-2800 Fax: (407) 367-2801
Department of Computer Science & Engineering, Florida Atlantic University