On Sun, 29 Dec 1996 11:19:21 -0800 
 David Carrel <carrel@cisco.com> wrote:

 > dio.o is definitely not being made.  Adding the following line to
 > sys/arch/hp300/conf/files.hp300.oldconf makes things work again.
 > 
 > arch/hp300/dev/dio.c                  standard

So, I've committed this fix... should appear tomorrow.

 > That kernel boots just fine, but it does not recognize the second grf
 > device (which is in the config file).  NGRF is indeed set to 2.  I haven't
 > thrashed out this problem yet.  Running grfinfo on /dev/grf0 works just
 > fine, but running it on /dev/grf1 cause a panic.  Ideas?

...I ran grfinfo /dev/grf1 on my 319 which has only grf0, and I got no
panic... I need more info on this before I can debug it further.

Jason R. Thorpe                                       thorpej@nas.nasa.gov
NASA Ames Research Center                               Home: 408.866.1912
NAS: M/S 258-6                                          Work: 415.604.0935
Moffett Field, CA 94035                                Pager: 415.428.6939