Hi!

Have got an HP 9000/715 workstation, and trying to boot NetBSD
on it. But kernel (taken from ftp.netbsd.org) crashes.
What can I do?

Firmware Version  1.2
Duplex Console IO Dependent Code (IODC) revision 0
------------------------------------------------------------------------------
   (c) Copyright 1990-1996, Hewlett-Packard Company, All rights reserved
------------------------------------------------------------------------------
  Processor   Speed            State           CoProcessor State  Cache Size
  ---------  --------   ---------------------  -----------------  ----------
      0      120  Mhz   Active                 Functional          256 KB
  Central Bus Speed (in mhz)  :        120
  Available Memory (bytes)    :  301989888
  Good Memory Required (bytes):   23252992
   Primary boot path:    core.LAN.0.0.0.0.0.0
   Alternate boot path:  core.SCSI.6.0
   Console path:         core.SERIAL_1.9600.8.none
   Keyboard path:        core.PS2
CPU 0
  WARNING:  Memory has been initialized, but not tested as a result of
            FASTBOOT being enabled.  To test memory, disable FASTBOOT
            and reboot system
Processor is booting from first available device.
To discontinue, press any key within 10 seconds.
Boot terminated.
------- Main Menu -------------------------------------------------------------
        Command                         Description
        -------                         -----------
        BOot [PRI|ALT|<path>]           Boot from specified path
        PAth [PRI|ALT|CON|KEY] [<path>] Display or modify a path
        SEArch [DIsplay|IPL] [<path>]   Search for boot devices
        COnfiguration menu              Displays or sets boot values
        INformation menu                Displays hardware information
        SERvice menu                    Displays service commands
        DIsplay                         Redisplay the current menu
        HElp [<menu>|<command>]         Display help for menu or command
        RESET                           Restart the system
-------
Main Menu: Enter command or menu > BO LAN
Interact with IPL (Y or N)?> y
Booting...
Network Station Address 080009-f70300
Boot IO Dependent Code (IODC) revision 0
HARD Booted.
>> NetBSD/hp700 LIF Boot, Revision 1.1
>> (fredette@the-gates-of-delirium.home, Tue Jun  4 13:28:53 EDT 2002)
>> Enter "reset" to reset system.
Boot: [[[lf0a:]netbsd][-a][-c][-d][-s][-v][-q]] :-
2149424+81920+188416 [283456+68920]=0x31959c
Start @ 0x80000 [1=0x342000-0x39959c]...
SPID bits: 0x0, error = -2
[ using 357788 bytes of netbsd ELF symbol table ]
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.
NetBSD 1.6A (GENERIC) #0: Tue Jun  4 15:12:20 EDT 2002
    fredette@the-gates-of-delirium.home:/data/union-hp700-b/src/sys/arch/hp700/c
ompile/GENERIC
HP9000/type 80, sv 58e PA-RISC 1.1
real mem = 288 MB (512 KB reserved for PROM, 239 MB used by NetBSD)
avail mem = 223 MB
using 3712 buffers containing 14848 KB of memory
mainbus0 (root) [flex fff80000]
pdc0 at mainbus0
"FW SCSI" at mainbus0 (type 4, sv 89) hpa f3f8c000 not configured
mem0 at mainbus0 hpa fffb1000: size 288MB
cpu0 at mainbus0 hpa fffa0000 irq 31: Tornado rev 0, lev 1, cat A, 120 MHz clk
cpu0: shadows, 258K/256K D/I caches, 120 shared TLB, 16 shared BTLB
cpu0: Tornado floating point, rev 1
"WAX Bus Adapter" at mainbus0 (type b, sv 8e) hpa ffe00000 not configured
"WAX EISA Bus Adapter" at mainbus0 (type b, sv 90) hpa fc000000 not configured
lasi0 at mainbus0 hpa ffd00000 irq 28: rev 3.0
gsc0 at lasi0
"PS/2 port" at gsc0 (type a, sv 84) hpa ffd08100 not configured
"PS/2 port" at gsc0 (type a, sv 84) hpa ffd08000 not configured
"floppy controller" at gsc0 (type a, sv 83) hpa ffd0a000 not configuredlpt0 at gsc0 hpa ffd02000 irq 7
com0 at gsc0 hpa ffd05000 irq 5: ns16550a, working fifo
ie0 at gsc0 hpa ffd07000 irq 8: v3.0 address 08:00:09:f7:03:00, type LASI/i82596
CA
osiop0 at gsc0 hpa ffd06000 irq 9: NCR53C710 rev 2, 40MHz, SCSI ID 7
scsibus0 at osiop0: 8 targets, 8 luns per target
WARNING: BTLB address misaligned
kernel: DTLB miss trap, code=f0069000
kernel: DTLB miss trap, code=f0069000
kernel: DTLB miss trap, code=f0069000
kernel: DTLB miss trap, code=f0069000
kernel: DTLB miss trap, code=f0069000
kernel: DTLB miss trap, code=f0069000
kernel: DTLB miss trap, code=f0069000
kernel: DTLB miss trap, code=f0069000
kernel: DTLB miss trap, code=f0069000
kernel: DTLB miss trap, code=f0069000
kernel: DTLB miss trap, code=f0069000
kernel: DTLB miss trap, code=f0069000
kernel: DTLB miss trap, code=f0069000
kernel: DTLB miss trap, code=f0069000
kernel: DTLB miss trap, code=f0069000
kernel: DTLB miss trap, code=f0069000


-- 
Totus tuus, Glebius.
GLEBIUS-RIPN GLEB-RIPE