3com Bluetooth PC Card on hpcarm platform

[jmitchel%bigjar.com@localhost]

Hello,

I'm trying to get a 3Com Bluetooth PC card working on a Jornada 720
(hpcarm) device. The serial chip on the card is recognized by NetBSD, but
the btuart driver doesn't attach. I can't tell whether there is an issue 
specific to the hpcarm port, or if there's another issue. I've also tried
a 5.1.2 kernel on the hpcarm port and a 5.1.2 and 6.0_Beta kernel on a
Jornada 680 (hpcsh).

I'm attaching the dmesg below. Any suggestions on how to troubleshoot this
would be much appreciated.

Jason M.


Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.0_BETA (JORNADA720)
total memory = 32768 KB
avail memory = 27136 KB
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
cpu0 at mainbus0: SA-1110 step B-4 (SA-1 core)
cpu0: DC enabled IC enabled WB enabled LABT
cpu0: 16KB/32B 32-way Instruction cache
cpu0: 8KB/32B 32-way write-back Data cache
saip0 at mainbus0
saost0 at saip0 addr 0x90000000-0x9000001f
saost0: SA-11x0 OS Timer
sacom0 at saip0 addr 0x80050000-0x80050023 intr 17
sacom0: SA-11x0 UART3
sacc0 at saip0 addr 0x40000000-0x40001fff
sacc0: SA-1111 rev 1.1
sacpcic0 at sacc0
pcmcia0 at sacpcic0
pcmcia1 at sacpcic0
sed0 at saip0
sed0: Epson SED1356, console
sed0: framebuffer address: 0x48200000
sed0: WARNING: powerhook_establish is deprecated
hpcfb0 at sed0: 640x240 pixels, 65536 colors, 80x24 chars
wsdisplay0 at hpcfb0 kbdmux 1: console (std, vt100 emulation)
wsmux1: connecting to wsdisplay0
hpcfb: 640x240 pixels, 65536 colors, 80x24 chars
wsdisplay0: screen 1 added (std, vt100 emulation)
j720ssp0 at saip0 addr 0x80070000-0x800700ff
j720kbd0 at j720ssp0
hpckbd0 at j720kbd0
wskbd0 at hpckbd0: console keyboard, using wsdisplay0
j720tp0 at j720ssp0
wsmouse0 at j720tp0 mux 0
wskbd at j720tp0 not configured
j720lcd0 at j720ssp0: brightness 38, contrast 135
j720pwr0 at j720ssp0
hpcapm0 at j720pwr0: pseudo power management module
apmdev0 at hpcapm0: Power Management spec V1.2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
clock: hz=100 stathz=64
timecounter: Timecounter "saost_count" frequency 3686400 Hz quality 100
sacpcic0: card present
IPsec: Initialized Security Association Processing.
an0 at pcmcia0 function 0: <Cisco Systems, 350 Series Wireless LAN Adapter>
an0: Cisco Systems 350 Series (firmware 4.25.23)
an0: 802.11 address: 00:09:b7:46:a0:b5, channel: 1-11
an0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
sacpcic0: card present
wdc0 at pcmcia1 function 0: <TRANSCEND, TS4GCF  >
wdc0: i/o mapped mode
atabus0 at wdc0 channel 0
wd0 at atabus0 drive 0
wd0: <TRANSCEND>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 4011 MB, 8150 cyl, 16 head, 63 sec, 512 bytes/sect x 8215200 sectors
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
WARNING: no TOD clock present
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
sacpcic0: removal event
an0: detached
sacpcic0: insertion event
com0 at pcmcia0 function 0: <3Com, 3CRWB6096B Bluetooth PC Card, , >
com0: ns16550a, working fifo
sacpcic0: removal event
com0: detached
sacpcic0: insertion event
com0 at pcmcia0 function 0: <3Com, 3CRWB6096B Bluetooth PC Card, , >
com0: ns16550a, working fifo
sacpcic0: removal event
com0: detached
sacpcic0: insertion event
com0 at pcmcia0 function 0: <3Com, 3CRWB6096B Bluetooth PC Card, , >
com0: ns16550a, working fifo
sacpcic0: removal event
com0: detached
sacpcic0: insertion event
an0 at pcmcia0 function 0: <Cisco Systems, 350 Series Wireless LAN Adapter>
an0: Cisco Systems 350 Series (firmware 4.25.23)
an0: 802.11 address: 00:09:b7:46:a0:b5, channel: 1-11
an0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps