Is anyone using an IBM Microdrive?  When I try it from the PC Card
adaptor in my i386 1.4 laptop, I get the following error on mount:
wd1a: aborted command reading fsbn 16 of 16-31 (wd1 bn 79; cn 0 to 1 sn
16), retrying
wd1: soft error (corrected)

but other then that it works fine.  When I try to use it as root for
hpcmips (still in the PC card adaptor), I get:
NetBSD 1.4S (CLIO) #1: Fri Feb 11 07:25:23 PST 2000
[...]
pcic: does not support memory and I/O cards, ignored (ident=c0)
pcic0 at isa3 port 0x3e0-0x3e1 iomem 0x70000-0x73fff irq 851971
pcic: does not support memory and I/O cards, ignored (ident=c0)
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has socket A only
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
pcmcia2 at pcic0 controller 1 socket 0
../../../../arch/hpcmips/vr/vr.c(236): vr_bus_reset() not implemented.
ISA IRQ 3 -> GPIO port 13
pcic0: using irq 851971 for socket events
button manager
pcmcia0: CIS version PCMCIA 2.0 or 2.1
pcmcia0: CIS info: IBM, microdrive
pcmcia0: Manufacturer code 0xa4, product 0x0
pcmcia0: function 0: fixed disk, ccr addr 200 mask f
pcmcia0: function 0, config table entry 0: memory card; irq mask 0; memspace 0-7ff; mwait_required rdybsy_active powerdown
pcmcia0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 4, iospace 0-f; memspace 0-7ff; rdybsy_active io8 io16 irqshare irqpulse irqlevel powerdown
pcmcia0: function 0, config table entry 2: I/O card; irq mask 4000; iomask a, iospace 1f0-1f7 3f6-3f7; memspace 0-7ff; rdybsy_active io8 io16 irqshare irqpulse irqlevel powerdown
pcmcia0: function 0, config table entry 3: I/O card; irq mask 4000; iomask a, iospace 170-177 376-377; memspace 0-7ff; rdybsy_active io8 io16 irqshare irqpulse irqlevel powerdown
wdc0 at pcmcia0 function 0 port 0x15000300-0x1500030f
isa_intr_alloc:................||.||||.|.|||...
pcmcia0: card irq 3
wd0 at wdc0 channel 0 drive 0: <IBM-DMDM-10340>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 342 MB, 695 cyl, 16 head, 63 sec, 512 bytes/sect x 700560 sectors
wd1 at wdc0 channel 0 drive 1: <IBM-DMDM-10340>
wd1: drive supports 16-sector pio transfers, lba addressing
wd1: 342 MB, 695 cyl, 16 head, 63 sec, 512 bytes/sect x 700560 sectors
boot device: wd0
root on wd0a dumps on wd0b
isa_intr_alloc:................||.||||.|.|||...
pcmcia0: card irq 3
wdc0:0:0: lost interrupt
	type: ata
	c_bcount: 512
	c_skip: 0
wdc0:0:0: recal timed out
wd0d: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
wdc0:0:0: not ready, st=0x10, err=0x00
wd0d: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
wdc0:0:0: not ready, st=0x10, err=0x00
wd0d: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
wdc0:0:0: not ready, st=0x10, err=0x00
wd0d: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
wdc0:0:0: not ready, st=0x10, err=0x00
wd0d: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
wdc0:0:0: not ready, st=0x10, err=0x00
wd0d: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0)


  Anyone know what could be going on here?

  I don't currently have a -current machine with a pcmcia slot, but I will
try making a boot floppy tomorrow (todays sup seems to panic).  

Matthew Orgass
darkstar@pgh.net