Subject: Re: Problem with 3C589C on IBM Z50
To: Jun Ebihara <jun@soum.co.jp>
From: PaulC <pc_list@ambersoft.dyndns.org>
List: port-hpcmips
Date: 03/16/2000 08:30:10
On Thu, Mar 16, 2000 at 11:25:48PM +0900, Jun Ebihara wrote:
> show me uname -a command result?
>
> --
> jun ebihara from WIDE camp
Jun
I booted the system from the Feb 14 snapshot and am currently running
under the shell from the sysinst utility menu - unfortunately this
doesnt seem to have uname installed. The dmesg and ifconfig outputs
are attached below in case these help (apologies for not including
in earlier post - I didnt have a terminal connected at the time)
Hope this helps - infortunately I cant get much further with the
installation until I can get the network up !
Thanks, Paul
PS. You will probably notice from the demsg that I dont have a storage
device to actually install on yet - I am waiting for my CF card to
arrive
===== dmesg ==================================================
Copyright (c) 1996, 1997, 1998, 1999, 2000
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 1.4S (RAMDISK) #0: Thu Feb 10 21:25:10 JST 2000
shin@touji:/work/home/shin/20000208/src/sys/arch/hpcmips/compile/RAMDISK
NEC VR4121 rev0.0 131.072MHz
total memory = 16384 KB
avail memory = 9152 KB
using 230 buffers containing 920 KB of memory
../../../../arch/hpcmips/vr/vr.c(236): vr_bus_reset() not implemented.
mainbus0 (root)
cpu0 at mainbus0: cpu0: NEC VR4100 CPU Rev. 6.0 with software emulated floating point Rev. 0.0
cpu0: L1 cache: 16KB/16B Instruction, 8KB/16B Data, direct mapped
cpu0: No L2 cache
cpu0: install VR specific idle routine
fb0 at mainbus0: rasops 640x480 pixels, 65536 colors, 80x48 chars
wsdisplay0 at fb0: console (std, vt100 emulation)
vrip0 at mainbus0
vrcmu0 at vrip0 addr 0xb000060-0xb00007f
vrgiu0 at vrip0 addr 0xb000100-0xb00011f intr 8
WIN setting: iiiiiiiiiiiiiiiiIiiiIoIiioiiiIII
I/O setting: iiiiiiiiiiiiiiiiiiiiioiiioiiiiii
data:,,,,,,;;,,,,,,,;,;;;;;;;;;;;;;;;|...|||||.||||||.||.|.......|||.
vrbcu0 at vrip0 addr 0xb000000-0xb00001f
vrbcu: cpu 131.072MHz, bus 32.768MHz, ram 32.768MHz
com0 at vrip0 addr 0xc000000-0xc000007 intr 9: ns16550a, working fifo
vrrtc0 at vrip0 addr 0xb0000c0-0xb0000df intr 2
vrkiu0 at vrip0 addr 0xb000180-0xb00019f intr 7
wskbd0 at vrkiu0 (mux 1 ignored for console): console keyboard, using wsdisplay0
vrpmu0 at vrip0 addr 0xb0000a0-0xb0000bf intr 1
vrdsu0 at vrip0 addr 0xb0000e0-0xb0000e7
vrpiu0 at vrip0 addr 0xb000120-0xb0002bf intr 5
wsmouse0 at vrpiu0
vrisab0 at vrgiu0:ISA port 0x15000000-0x18000000 mem 0x10000000-0x20000000
isa0 at vrisab0
pcic0 at isa0 port 0x3e0-0x3e1 iomem 0x70000-0x73fff irq 589827
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has sockets A and B
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
pcmcia2 at pcic0 controller 1 socket 0
pcmcia3 at pcic0 controller 1 socket 1
../../../../arch/hpcmips/vr/vr.c(236): vr_bus_reset() not implemented.
pcic0: using irq 589827
ISA IRQ 3 -> GPIO port 9
button manager
fixed, 8192 blockspcmcia0: CIS version PCMCIA 2.0 or 2.1
pcmcia0: CIS info: 3Com Corporation, 3C589, TP/BNC LAN Card Ver. 2a, 000002
pcmcia0: Manufacturer code 0x101, product 0x589
pcmcia0: function 0: network adapter, ccr addr 10000 mask 3
pcmcia0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 4, iospace 0-f; io8 io16 irqlevel
pcmcia0: function 0, config table entry 3: I/O card; irq mask ffff; iomask 4, iospace 0-f; io8 io16 irqlevel
ep0 at pcmcia0 function 0 port 0x15000330-0x1500033f: 3Com 3c589 10Mbps Ethernet
ep0: supplying EUI64: 00:60:97:ff:fe:47:bb:c2
ep0: address 00:60:97:47:bb:c2, 8KB byte-wide FIFO, 5:3 Rx:Tx split
ep0: 10baseT, 10base5, 10base2 (default 10baseT)
boot device: <unknown>
root on md0a dumps on md0b
WARNING: clock lost 382 days -- CHECK AND RESET THE DATE!
root file system type: ffs
isa_intr_alloc:............................|...
pcmcia0: card irq 3
<7>ep0: starting DAD for fe80:0008::0260:97ff:fe47:bbc2
<6>ep0: DAD complete for fe80:0008::0260:97ff:fe47:bbc2 - no duplicates found
===== ifconfig ep0 ===========================================
ep0: flags=8c63<UP,BROADCAST,NOTRAILERS,RUNNING,OACTIVE,SIMPLEX,MULTICAST> mtu 1500
media: Ethernet 10baseT
inet 192.168.1.99 netmask 0xffffff00 broadcast 192.168.1.255
inet6 fe80:8::260:97ff:fe47:bbc2 prefixlen 64