From a kernel build from todays AnonCVS sources:

mem_cluster_cnt = 2
mem_clusters[0] = {0x0,0x1c3000}
mem_clusters[1] = {0x1c3000,0x1e3d000}
loading 0x1c3000,0x1e3d000
Copyright (c) 1996, 1997, 1998, 1999, 2000
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.4X (CLIO) #0: Tue Apr 11 13:25:07 PDT 2000
    root@jove.stargate.net:/usr/src/sys/arch/hpcmips/compile/CLIO
Sharp Tripad PV6000 (NEC VR4111 rev1.0 84.260MHz)
total memory = 32768 KB
avail memory = 28368 KB
using 435 buffers containing 1740 KB of memory
../../../../arch/hpcmips/vr/vr.c(294): vr_bus_reset() not implemented.
mainbus0 (root)
cpu0 at mainbus0: NEC VR4100 CPU Rev. 5.2 with software emulated floating point Rev. 0.0
cpu0: L1 cache: 16KB/16B Instruction, 8KB/16B Data, direct mapped
cpu0: No L2 cache
cpu0: install VR specific idle routine
bivideo0 at mainbus0: pseudo video controller
hpcfb0 at bivideo0: hpcrasops 640x480 pixels, 256 colors, 80x60 chars: tvram redraw
wsdisplay0 at hpcfb0
wsdisplay0: screen 0 added (std, vt100 emulation)
vrip0 at mainbus0
vrcmu0 at vrip0 addr 0xb000060-0xb00007f
vrgiu0 at vrip0 addr 0xb000100-0xb00011f intr 8
vrbcu0 at vrip0 addr 0xb000000-0xb00001f
vrbcu: cpu 84.260MHz, bus 28.086MHz, ram 28.086MHz
com0 at vrip0 addr 0xc000000-0xc000007 intr 9: ns16550a, working fifo
com0: console
vrrtc0 at vrip0 addr 0xb0000c0-0xb0000df intr 2
vrkiu0 at vrip0 addr 0xb000180-0xb00019f intr 7
wskbd0 at vrkiu0 mux 1
vrpmu0 at vrip0 addr 0xb0000a0-0xb0000bf intr 1
vrdsu0 at vrip0 addr 0xb0000e0-0xb0000e7
vrpiu0 at vrip0 addr 0xb000120-0xb0002bf intr 5
wsmouse0 at vrpiu0
vrisab3 at vrgiu0:ISA port 0x15000000-0x18000000 mem 0x10000000-0x20000000
isa3 at vrisab3
pcic: does not support memory and I/O cards, ignored (ident=c0)
pcic0 at isa3 port 0x3e0-0x3e1 iomem 0x70000-0x73fff irq 851971
pcic: does not support memory and I/O cards, ignored (ident=c0)
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has socket A only
pcmcia0 at pcic0 controller 0 socket 0
pcmcia1 at pcic0 controller 0 socket 1
pcmcia at pcic0 controller 1 socket 0 not configured
btnmgr0 at mainbus0
wskbd1 at btnmgr0 mux 1
../../../../arch/hpcmips/vr/vr.c(294): vr_bus_reset() not implemented.
pcic0: using irq 851971 for socket events
pcmcia1: CIS version PCMCIA 2.0 or 2.1
pcmcia1: CIS info: CF, 008MB, 
pcmcia1: Manufacturer code 0xa, product 0x0
pcmcia1: function 0: fixed disk, ccr addr 200 mask f
pcmcia1: function 0, config table entry 0: memory card; irq mask 0; memspace 0-7ff; mwait_required rdybsy_active powerdown
pcmcia1: function 0, config table entry 1: I/O card; irq mask ffff; iomask 4, iospace 0-f; memspace 0-7ff; rdybsy_active io8 io16 irqshare irqpulse irqlevel powerdown
pcmcia1: function 0, config table entry 2: I/O card; irq mask 4000; iomask a, iospace 1f0-1f7 3f6-3f7; memspace 0-7ff; rdybsy_active io8 io16 irqshare irqpulse irqlevel powerdown
pcmcia1: function 0, config table entry 3: I/O card; irq mask 4000; iomask a, iospace 170-177 376-377; memspace 0-7ff; rdybsy_active io8 io16 irqshare irqpulse irqlevel powerdown
wdc0 at pcmcia1 function 0 port 0x15000300-0x1500030f
wd0 at wdc0 channel 0 drive 0: <>
wd0: drive supports 1-sector pio transfers, lba addressing
wd0: 7936 KB, 248 cyl, 2 head, 32 sec, 512 bytes/sect x 15872 sectors
wd1 at wdc0 channel 0 drive 1: <ST506>
wd1: drive supports 1-sector pio transfers, chs addressing
wd1: 69632 KB, 1024 cyl, 8 head, 17 sec, 512 bytes/sect x 139264 sectors
boot device: wd0
root on wd0a dumps on wd0b
pcmcia1: card irq 3
wdc0:0:0: lost interrupt
	type: ata tc_bcount: 512 tc_skip: 0
wdc0:0:0: lost interrupt
	type: ata tc_bcount: 512 tc_skip: 0
wdc0:0:0: recal timed out
wd0d: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
wdc0:0:0: lost interrupt
	type: ata tc_bcount: 512 tc_skip: 0
wdc0:0:0: recal timed out
wd0d: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
wdc0:0:0: lost interrupt
	type: ata tc_bcount: 512 tc_skip: 0
wdc0:0:0: recal timed out
wd0d: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
wdc0:0:0: lost interrupt
	type: ata tc_bcount: 512 tc_skip: 0
wdc0:0:0: recal timed out
wd0d: device timeout reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying

  The ST506 is what wd defines when it thinks there is a drive there but
the controller doesn't.  Could the CF have a different GPIO then the
PCMCIA slot?


Matthew Orgass
darkstar@pgh.net