--BZaMRJmqxGScZ8Mx
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

I'm trying to install NetBSD on a Vadem Clio C-1050 and am having some
problems.  This is the first I've done anything with NetBSD.  I have
experience with SunOS, Solaris and Linux, but when I decided to run a *nix
on a Clio the only distribution that looked like it would support it fairly
well was NetBSD.

I've been trying to make it work for several days.  The kernel does not
seem to find anything that is in either the pcmcia or compact flash slots.
I've tried a couple of different CF cards both in the CF slot and with an
adapter in the PCMCIA slot.  I've also tried a Lucent Orinoco wireless
network card.  I did a quick install of NetBSD on an old 486 laptop and
have no problems using these devices in that.  I've tried both the 1.5.2
release and the latest snapshot.

Any suggestions as to where to go from here would be greatly appreciated.
I would prefer not to have to set up a cross compile environment if
possible, but if needed I can do it.  Following is the output from the
kernel during boot.  Thanks in advance for any assistance.

mem_cluster_cnt =3D 2
mem_clusters[0] =3D {0x0,0x68d000}
mem_clusters[1] =3D {0x68d000,0x1973000}
loading 0x68d000,0x1973000
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5.3_RC1 (RAMDISK) #1: Sat Mar 16 16:19:13 PST 2002
    root@mobile1.cjones.org:/b/1.5-src/sys/arch/hpcmips/compile/RAMDISK
MIPS VR 4121 (NEC VR4121 rev1.2 168.521MHz)
total memory =3D 32768 KB
avail memory =3D 23544 KB
using 435 buffers containing 1740 KB of memory
/mnt/1.5-src/sys/arch/hpcmips/vr/vr.c(294): vr_bus_reset() not implemented.
mainbus0 (root)
cpu0 at mainbus0: NEC VR4100 CPU (0xc60) Rev. 6.0 with software emulated fl=
oating point Rev. 0.0
cpu0: L1 cache: 16KB/16B instruction, 8KB/16B data, direct mapped
cpu0: No L2 cache
cpu0: install VR specific idle routine
vrip0 at mainbus0
vrcmu0 at vrip0 addr 0xb000060-0xb00007f
vrgiu0 at vrip0 addr 0xb000100-0xb00011f intr 8
vrbcu0 at vrip0 addr 0xb000000-0xb00001f
vrbcu: cpu 168.521MHz, bus 28.086MHz, ram 56.173MHz
com0 at vrip0 addr 0xc000000-0xc000007 intr 9: ns16550a, working fifo
com0: console
vrrtc0 at vrip0 addr 0xb0000c0-0xb0000df intr 2
vrkiu0 at vrip0 addr 0xb000180-0xb00019f intr 7
wskbd0 at vrkiu0 mux 1
vrpmu0 at vrip0 addr 0xb0000a0-0xb0000bf intr 1
vrdsu0 at vrip0 addr 0xb0000e0-0xb0000e7
vrpiu0 at vrip0 addr 0xb000120-0xb0002bf intr 5
wsmouse0 at vrpiu0 mux 0
vrisab3 at vrgiu0:ISA port 0x15000000-0x18000000 mem 0x10000000-0x20000000
isa3 at vrisab3
pcic0 at isa3 port 0x3e0-0x3e1 iomem 0x70000-0x73fff irq 851971
pcic0: controller 0 (Intel 82365SL Revision 1) has no sockets
pcic0: controller 1 (Intel 82365SL Revision 1) has socket A only
pcmcia at pcic0 controller 1 socket 0 not configured
bivideo0 at mainbus0: pseudo video controller
hpcfb0 at bivideo0: hpcrasops 640x480 pixels, 65536 colors, 80x48 chars: tv=
ram redraw
wsdisplay0 at hpcfb0
wsdisplay0: screen 0 added (std, vt100 emulation)
btnmgr0 at mainbus0
wskbd1 at btnmgr0 mux 1
hpcapm0 at mainbus0: pseudo power management module
apmdev0 at hpcapm0: Power Management spec V1.2
/mnt/1.5-src/sys/arch/hpcmips/vr/vr.c(294): vr_bus_reset() not implemented.
pcic0: using irq 851971 for socket events
 fixed, 8192 blocksboot device: <unknown>
root on md0a dumps on md0b
WARNING: preposterous clock chip time
 -- CHECK AND RESET THE DATE!
root file system type: ffs


--=20
><>  "Imagination is more important than knowledge." - Albert Einstein  <><
Mike Cowper <>< MIB# 2001 ><> Mr. Wizard <>      "Any sufficiently advanced
http://www.wizardslab.net/~mcowper       >< technology is indistinguishable
mailto:mcowper@wizardslab.net            <> from magic." - Arthur C. Clarke
><>  "What do YOU care what other people think?"  - Richard P. Feynman  <><

--BZaMRJmqxGScZ8Mx
Content-Type: application/pgp-signature
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org

iD8DBQE8vxo81WAfnuyNDHURAjKjAKCfyM0SK9Mq5P7Z7R8eO23vnMNBFgCbBL9q
0mM15vqCng3hDaWsh9ebvao=
=SDkN
-----END PGP SIGNATURE-----

--BZaMRJmqxGScZ8Mx--