I am running into a similar problem on my Intermec 6651 (TX3922 also). I 
traced all through the boot loaders (both psdboot1.exe and hpcboot.exe) in 
the debugger and it makes it all the way to the kernel.

I can send the boot log and debug info at the crash point if anyone thinks 
it would help (or is interested). But the last thing you see when installing 
from the serial console is:

EXCEPTION: 0xBFC00180
00: Int

EXCEPTION: 0xBFC00180
04: AdEL

It looks like the 1.6 GENERIC kernel is not running 100% on this cpu. If I 
can find the time this week, I am going to try to cross-build a kernel with 
some extra debugging and dig some more.

Joe Steele


----Original Message Follows----
From: Matthew Braun <mjbraun@enteract.com>
To: port-hpcmips@netbsd.org
Subject: Unable to boot 1.6 GENERIC on ePods
Date: Wed, 8 Jan 2003 21:41:43 -0600

I have a ePods tablet and I am unable to boot 1.6 GENERIC for purposes of 
installation. I have been able to boot 1.5.3 TX3922 using PBSDBOOT1 
(strangely, only boot1 works; I've attached the boot logs at the end) using 
the Victor InterLink MP-C1 framebuffer, and enabling serial port support, 
but the same loader and options doesn't work for 1.6.

When I try to boot 1.6, the progress bar reaches the end, the ePods freezes 
up, but there's nothing on the serial console.

What am I missing here?

Any help is appreciated!


__________________

mem_cluster_cnt = 2
mem_clusters[0] = {0x0,0x2db000}
mem_clusters[1] = {0x2db000,0xd25000}
loading 0x2db000,0xd25000
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001
     The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.

NetBSD 1.5.3 (TX3922) #2: Mon Jul  1 20:07:09 PDT 2002
     chris@gollum.mt.sri.com:/usr/src/sys/arch/hpcmips/compile/TX3922
Victor InterLink MPC101 (TOSHIBA TMPR3922 rev. 1.1 129.00 MHz)
total memory = 16384 KB
avail memory = 11992 KB
using 230 buffers containing 920 KB of memory
mainbus0 (root)
cpu0 at mainbus0: Toshiba TX3900 CPU (0x2230) Rev. 3.0 with software 
emulated fl
oating point Rev. 0.0
cpu0: 16KB/16B Instruction 2-way set associative, 8KB/16B Data 2-way set 
associa
tive, 64 TLB entries
txsim0 at mainbus0
tx39icu0 at txsim0
tx39power0 at txsim0
tx39clock0 at txsim0
tx39io0 at txsim0
txioman0 at tx39io0:
tx39biu0 at txsim0
tx39sib0 at txsim0: 1.536 MHz
ucb0 at tx39sib0 slot 0: TOSHIBA TC35413F
ucbtp0 at ucb0:
wsmouse0 at ucbtp0 mux 0
ucbsnd0 at ucb0: audio 3.692 kHz telecom 1.200 kHz
tx39uart0 at txsim0
txcom0 at tx39uart0 slot 0: console
txcom1 at tx39uart0 slot 1
txcsbus2 at tx39biu0
m38813c0 at txcsbus2 iocs CARD1(io/attr) 16bit 0+0x8
skbd0 at m38813c0
wskbd0 at skbd0 mux 1
plum0 at txcsbus2 regcs CS3 32bit 0+0xffffffff iocs MCS0 32bit 0+0xffffffff 
memc
s MCS1 32bit 0+0xffffffff irq1 277(8:21): Plum2 #2
plumicu0 at plum0
plumpower0 at plum0
plumvideo0 at plum0: display mode: 8bpp
hpcfb0 at plumvideo0: hpcrasops 640x240 pixels, 256 colors, 80x24 chars: 
tvram r
edraw
wsdisplay0 at hpcfb0
wsdisplay0: screen 0 added (std, vt100 emulation)
ohci0 at plum0
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0:  OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
plumpcmcia0 at plum0
pcmcia0 at plumpcmcia0
pcmcia0: CIS version PCMCIA 2.0 or 2.1
pcmcia0: CIS info: SanDisk, SDP, 5/3 0.6
pcmcia0: Manufacturer code 0x45, product 0x401
pcmcia0: function 0: fixed disk, ccr addr 200 mask f
pcmcia0: function 0, config table entry 0: memory card; irq mask 0; memspace 
0-7
ff; maxtwins 1; mwait_required rdybsy_active powerdown
pcmcia0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 
4, io
space 0-f; memspace 0-7ff; maxtwins 1; rdybsy_active io8 io16 irqshare 
irqpulse
irqlevel powerdown
pcmcia0: function 0, config table entry 2: I/O card; irq mask 4000; iomask 
a, io
space 1f0-1f7 3f6-3f7; memspace 0-7ff; maxtwins 1; rdybsy_active io8 io16 
irqsha
re irqpulse irqlevel powerdown
pcmcia0: function 0, config table entry 3: I/O card; irq mask 4000; iomask 
a, io
space 170-177 376-377; memspace 0-7ff; maxtwins 1; rdybsy_active io8 io16 
irqsha
re irqpulse irqlevel powerdown
pcmcia0: function 0, config table entry 7: I/O card; irq mask 4000; iomask 
a, io
space 170-177 376-377; memspace 0-7ff; maxtwins 1; rdybsy_active io8 io16 
irqsha
re irqpulse irqlevel powerdown
wdc0 at pcmcia0 function 0
wd0 at wdc0 channel 0 drive 0: <SanDisk SDCFB-128>
wd0: drive supports 1-sector pio transfers, lba addressing
wd0: 122 MB, 980 cyl, 8 head, 32 sec, 512 bytes/sect x 250880 sectors
pcmcia1 at plumpcmcia0
btnmgr0 at mainbus0
wskbd1 at btnmgr0 mux 1
boot device: wd0
root on wd0a dumps on wd0b


_________________________________________________________________
The new MSN 8 is here: Try it free* for 2 months 
http://join.msn.com/?page=dept/dialup